bilmar_gh at yahoo.com
Guest
|
 Posted: Thu Jan 17, 2008 4:32 pm Post subject: [asterisk-users] IAX Trunk between two Asterisks |
 |
|
This is my configuration in the extensions.conf,
iax.conf at Site A and Site B, so anyone can help why
the call refused?
Site A:
[IPLink]
type=friend
context=IPLinkIncoming
host=192.168.2.3
usename=IPLink
secret=password
canreinvite=no
nat=no
[SiteBInternal]
exten => _2XX,1,Dial(IAX2/${EXTEN}@IPLink)
exten => _2XX,2,Playback(vm-nobodyavail)
exten => _2XX,3,Hangup()
exten => _2XX,102,Playback(tt-allbusy)
exten => _2XX,103,Hangup()
[IPLinkIncoming]
include => SiteBInternal
include => SiteBExternal
And at Site B:
[IPLink]
type=friend
context=IPLinkIncoming
host=192.168.2.2
usename=IPLink
secret=password
canreinvite=no
nat=no
[SiteAInternal]
exten => _2XX,1,Dial(IAX2/${EXTEN}@IPLink)
exten => _2XX,2,Playback(vm-nobodyavail)
exten => _2XX,3,Hangup()
exten => _2XX,102,Playback(tt-allbusy)
exten => _2XX,103,Hangup()
[IPLinkIncoming]
include => SiteAInternal
include => SiteAExternal
Regards
Bilal
------------------
| Quote: | Hi All;
I did an IP Trunk using IAX between two Asterisk
boxes, now Asterisk A can send a call for B but B
refuse it. The IAX type was configured to be
|
"friend"
| Quote: | in the iax.con for Asterisk A and B, is there any
thing else need to be done to let B accept the call
from A?
Also, I used an static IP address for the host when
|
I
| Quote: | configured the iax client in the iax.conf file.
Any help?
Regards
Bilal
|
I used to see this problem when I used to use IAX2.
Sometimes it would
just
go away. I seem to remember using insecure=very to
get it working but
I may
be wrong.
Anyways, post the relevant parts of your IAX2 confs
from both boxes and
someone might be able to spot something right off the
bat.
Thanks,
Steve Totaro
____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping |
|
Search
