View previous topic :: View next topic |
Author |
Message |
chirag at ncc.co.in Guest
|
Posted: Thu Oct 09, 2014 8:22 am Post subject: [asterisk-users] SIP over 3G Mobile Network using NAT |
|
|
Dear,
Kindly guide with the 2 issues mentioned below
#1 - Host unreachable 0 last qualify 0 (only in 3G)
I am trying to use SIP client over 3G. It registers and call can be initiated from the client but it can't receive call; cause asterisk sever marks it as unreachable immediately after registration.
"[2014-10-08 14:32:47] NOTICE[1610]: chan_sip.c:29596 sip_poke_noanswer: Peer '1007' is now UNREACHABLE! Last qualify: 0"
The above work well when I turn off 3g and switch over to my office wifi. Kindly guide if there are specific settings for 3G / mobile network.
#2 - SIP retransmits - no reply to our critical packet
Issue occurs when dialing a call out from a remote wifi network ( in my case office wifi ), Its auto disconnected within 10s with SIP Retransmissions notice / warning message
However if a call is initiated from home local network ( ipad ) to the phone ( registered with asterisk over office wifi )... all works well !
Issues with call sequence in a table form Local Device Asterisk SIP Server & Router with NAT Port Forwards iPad with Bria SIP Client
Remote Device iPhone with Bria SIP Client
CALL SEQUENCE Remote Network From To Works/Failed Issue 3G Ipad ( local ) Iphone ( remote ) FAILED Host unreachable 0 last qualify 0 !
Iphone ( remote ) Ipad ( local via NAT ) WORKS – both Audio & Video
Office Wifi / Broadband Ipad ( local ) Iphone ( remote ) WORKS – both Audio & Video
Iphone ( remote ) Ipad ( local via NAT ) FAILED SIP retransmits - no reply to our critical packet ! Call disconnects within 10s
Kindly guide
--
Thank You
Best,
Chirag A. |
|
Back to top |
|
|
mitul at enterux.in Guest
|
Posted: Thu Oct 09, 2014 8:28 am Post subject: [asterisk-users] SIP over 3G Mobile Network using NAT |
|
|
Remove Notify= setting in your sip.conf device section. On 09-Oct-2014 6:52 PM, "Chirag Ajmera" <chirag@ncc.co.in (chirag@ncc.co.in)> wrote: Quote: |
Dear,
Kindly guide with the 2 issues mentioned below
#1 - Host unreachable 0 last qualify 0 (only in 3G)
I am trying to use SIP client over 3G. It registers and call can be initiated from the client but it can't receive call; cause asterisk sever marks it as unreachable immediately after registration.
"[2014-10-08 14:32:47] NOTICE[1610]: chan_sip.c:29596 sip_poke_noanswer: Peer '1007' is now UNREACHABLE! Last qualify: 0"
The above work well when I turn off 3g and switch over to my office wifi. Kindly guide if there are specific settings for 3G / mobile network.
#2 - SIP retransmits - no reply to our critical packet
Issue occurs when dialing a call out from a remote wifi network ( in my case office wifi ), Its auto disconnected within 10s with SIP Retransmissions notice / warning message
However if a call is initiated from home local network ( ipad ) to the phone ( registered with asterisk over office wifi )... all works well !
Issues with call sequence in a table form Local Device Asterisk SIP Server & Router with NAT Port Forwards iPad with Bria SIP Client
Remote Device iPhone with Bria SIP Client
CALL SEQUENCE Remote Network From To Works/Failed Issue 3G Ipad ( local ) Iphone ( remote ) FAILED Host unreachable 0 last qualify 0 !
Iphone ( remote ) Ipad ( local via NAT ) WORKS – both Audio & Video
Office Wifi / Broadband Ipad ( local ) Iphone ( remote ) WORKS – both Audio & Video
Iphone ( remote ) Ipad ( local via NAT ) FAILED SIP retransmits - no reply to our critical packet ! Call disconnects within 10s
Kindly guide
--
Thank You
Best,
Chirag A.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
Back to top |
|
|
mitul at enterux.in Guest
|
Posted: Thu Oct 09, 2014 8:28 am Post subject: [asterisk-users] SIP over 3G Mobile Network using NAT |
|
|
Oops its qualify= n not notify=
Also check if your asterisk sip server I available with ports on the public ip that your phone is trying to register from 3G nw.
On 09-Oct-2014 6:56 PM, mitul@enterux.in (mitul@enterux.in) wrote: Quote: |
Remove Notify= setting in your sip.conf device section. On 09-Oct-2014 6:52 PM, "Chirag Ajmera" <chirag@ncc.co.in (chirag@ncc.co.in)> wrote: Quote: |
Dear,
Kindly guide with the 2 issues mentioned below
#1 - Host unreachable 0 last qualify 0 (only in 3G)
I am trying to use SIP client over 3G. It registers and call can be initiated from the client but it can't receive call; cause asterisk sever marks it as unreachable immediately after registration.
"[2014-10-08 14:32:47] NOTICE[1610]: chan_sip.c:29596 sip_poke_noanswer: Peer '1007' is now UNREACHABLE! Last qualify: 0"
The above work well when I turn off 3g and switch over to my office wifi. Kindly guide if there are specific settings for 3G / mobile network.
#2 - SIP retransmits - no reply to our critical packet
Issue occurs when dialing a call out from a remote wifi network ( in my case office wifi ), Its auto disconnected within 10s with SIP Retransmissions notice / warning message
However if a call is initiated from home local network ( ipad ) to the phone ( registered with asterisk over office wifi )... all works well !
Issues with call sequence in a table form Local Device Asterisk SIP Server & Router with NAT Port Forwards iPad with Bria SIP Client
Remote Device iPhone with Bria SIP Client
CALL SEQUENCE Remote Network From To Works/Failed Issue 3G Ipad ( local ) Iphone ( remote ) FAILED Host unreachable 0 last qualify 0 !
Iphone ( remote ) Ipad ( local via NAT ) WORKS – both Audio & Video
Office Wifi / Broadband Ipad ( local ) Iphone ( remote ) WORKS – both Audio & Video
Iphone ( remote ) Ipad ( local via NAT ) FAILED SIP retransmits - no reply to our critical packet ! Call disconnects within 10s
Kindly guide
--
Thank You
Best,
Chirag A.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
|
Back to top |
|
|
chirag at ncc.co.in Guest
|
Posted: Thu Oct 09, 2014 8:44 am Post subject: [asterisk-users] SIP over 3G Mobile Network using NAT |
|
|
Dear,
Kindly guide with the 2 issues mentioned below
#1 - Host unreachable 0 last qualify 0 (only in 3G)
I am trying to use SIP client over 3G. It registers and call can be initiated from the client but it can't receive call; cause asterisk sever marks it as unreachable immediately after registration.
"[2014-10-08 14:32:47] NOTICE[1610]: chan_sip.c:29596 sip_poke_noanswer: Peer '1007' is now UNREACHABLE! Last qualify: 0"
The above work well when I turn off 3g and switch over to my office wifi. Kindly guide if there are specific settings for 3G / mobile network.
#2 - SIP retransmits - no reply to our critical packet
Issue occurs when dialing a call out from a remote wifi network ( in my case office wifi ), Its auto disconnected within 10s with SIP Retransmissions notice / warning message
However if a call is initiated from home local network ( ipad ) to the phone ( registered with asterisk over office wifi )... all works well !
Kindly guide
--
Thank You
Best,
Chirag A. |
|
Back to top |
|
|
flojose at gmail.com Guest
|
Posted: Thu Oct 09, 2014 3:39 pm Post subject: [asterisk-users] SIP over 3G Mobile Network using NAT |
|
|
2014-10-09 8:42 GMT-05:00 Chirag Ajmera <chirag@ncc.co.in>:
Quote: | Dear,
Kindly guide with the 2 issues mentioned below
#1 - Host unreachable 0 last qualify 0 (only in 3G)
I am trying to use SIP client over 3G. It registers and call can be
initiated from the client but it can't receive call; cause asterisk sever
marks it as unreachable immediately after registration.
"[2014-10-08 14:32:47] NOTICE[1610]: chan_sip.c:29596 sip_poke_noanswer:
Peer '1007' is now UNREACHABLE! Last qualify: 0"
The above work well when I turn off 3g and switch over to my office wifi.
Kindly guide if there are specific settings for 3G / mobile network.
#2 - SIP retransmits - no reply to our critical packet
Issue occurs when dialing a call out from a remote wifi network ( in my case
office wifi ), Its auto disconnected within 10s with SIP Retransmissions
notice / warning message
However if a call is initiated from home local network ( ipad ) to the phone
( registered with asterisk over office wifi )... all works well !
Kindly guide
--
Thank You
Best,
Chirag A.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
You must be aware of your security using PBX over internet!!!
Take a look at your externhost/externip and localnet settings
Set it properly, so asterisk can make SIP responses according to your
WAN or LAN connection.
Regards.
José Flores Galicia
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
Back to top |
|
|
lmoore at omninet.net.au Guest
|
Posted: Thu Oct 09, 2014 5:51 pm Post subject: [asterisk-users] SIP over 3G Mobile Network using NAT |
|
|
On 9/10/2014 9:28 PM, Mitul Limbani wrote:
Quote: | Oops its qualify= n not notify=
Also check if your asterisk sip server I available with ports on the
public ip that your phone is trying to register from 3G nw.
|
In your devices sip configuration set;
qualify=no
nat=yes
in Bria;
Settings -> Advanced -> Default Network Traversal
Network Traversal Strategy Custom Configuration
STUN Wi-Fi On
STUN Mobile On
STUN Server stun.counterpath.com (or another if appropriate)
Accounts -> SIP Account -> Account Advanced
Media Network Traversal
Suppress STUN Wi-Fi Off
Suppress STUN Mobile On
SIP NETWORK TRAVERSAL
Global IP Wi-Fi On
Global IP Mobile On
KEEP ALIVE
Wi-Fi Interval 0
Mobile Interval 0
Depending on your 3G provider, you may need to adjust "Suppress STUN
Mobile".
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
Back to top |
|
|
chirag at ncc.co.in Guest
|
Posted: Fri Oct 10, 2014 1:24 am Post subject: [asterisk-users] SIP over 3G Mobile Network using NAT |
|
|
qualify=no
Bria
KEEP ALIVE
Wi-Fi Interval 0
Mobile Interval 0
Thanks you all ! The above has solved both the issues !
Best,
Chirag A.
On 10-10-2014 04:21 AM, Larry Moore wrote:
Quote: |
On 9/10/2014 9:28 PM, Mitul Limbani wrote:
Quote: | Oops its qualify= n not notify=
Also check if your asterisk sip server I available with ports on the
public ip that your phone is trying to register from 3G nw.
|
In your devices sip configuration set;
qualify=no
nat=yes
in Bria;
Settings -> Advanced -> Default Network Traversal
Network Traversal Strategy Custom Configuration
STUN Wi-Fi On
STUN Mobile On
STUN Server stun.counterpath.com (or another if appropriate)
Accounts -> SIP Account -> Account Advanced
Media Network Traversal
Suppress STUN Wi-Fi Off
Suppress STUN Mobile On
SIP NETWORK TRAVERSAL
Global IP Wi-Fi On
Global IP Mobile On
KEEP ALIVE
Wi-Fi Interval 0
Mobile Interval 0
Depending on your 3G provider, you may need to adjust "Suppress STUN Mobile".
|
|
|
Back to top |
|
|
|