VoIP Mailing List Archives

[jared.terrell at mcc.edu]

with the below defined in logger.conf on 11.6 cert 6
I am not getting any log message other than notice and warning in any files


when doing module reload logger - queue log is the only one that says it restarts


*CLI> module reload logger 
  == Parsing '/etc/asterisk/logger.conf': Found
 Asterisk Queue Logger restarted



built fresh box with make samples - added 2 stations, dialing from station a to station b
on console (core set verbose 15) get


-- x=0, open writing:  /var/spool/asterisk/voicemail/default/20545/tmp/9mrzpn format: wav49, 0x33b9d68
    -- x=1, open writing:  /var/spool/asterisk/voicemail/default/20545/tmp/9mrzpn format: gsm, 0x33c7938
    -- x=2, open writing:  /var/spool/asterisk/voicemail/default/20545/tmp/9mrzpn format: wav, 0x33c0f18
[Oct 23 11:03:33] WARNING[8832][C-00000003]: file.c:830 ast_readaudio_callback: Failed to write frame
    -- User hung up
  == Spawn extension (default, stdexten-NOANSWER, 1) exited non-zero on 'SIP/20321-00000001'
  == Using SIP RTP CoS mark 5
    -- Executing [20545@default:1] Gosub("SIP/20321-00000002", "20545,stdexten(SIP/20545)") in new stack
    -- Executing [20545@default:50000] NoOp("SIP/20321-00000002", "Start stdexten") in new stack
    -- Executing [20545@default:50001] Set("SIP/20321-00000002", "LOCAL(ext)=20545") in new stack
    -- Executing [20545@default:50002] Set("SIP/20321-00000002", "LOCAL(dev)=SIP/20545") in new stack
    -- Executing [20545@default:50003] Set("SIP/20321-00000002", "LOCAL(cntx)=") in new stack
    -- Executing [20545@default:50004] Set("SIP/20321-00000002", "LOCAL(mbx)=20545") in new stack
    -- Executing [20545@default:50005] Dial("SIP/20321-00000002", "SIP/20545,20") in new stack
[Oct 23 11:03:34] WARNING[8839][C-00000004]: app_dial.c:2437 dial_exec_full: Unable to create channel of type 'SIP' (cause 20 - Subscriber absent)
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [20545@default:50006] Goto("SIP/20321-00000002", "stdexten-CHANUNAVAIL,1") in new stack
    -- Goto (default,stdexten-CHANUNAVAIL,1)
    -- Executing [stdexten-CHANUNAVAIL@default:1] Goto("SIP/20321-00000002", "stdexten-NOANSWER,1") in new stack
    -- Goto (default,stdexten-NOANSWER,1)
    -- Executing [stdexten-NOANSWER@default:1] VoiceMail("SIP/20321-00000002", "20545,u") in new stack
       > 0x7f66440060b0 -- Probation passed - setting RTP source address to 10.128.1.47:7078
    -- <SIP/20321-00000002> Playing 'vm-theperson.ulaw' (language 'en')
    -- <SIP/20321-00000002> Playing 'digits/2.ulaw' (language 'en')
    -- <SIP/20321-00000002> Playing 'digits/0.ulaw' (language 'en')
    -- <SIP/20321-00000002> Playing 'digits/5.ulaw' (language 'en')



expecting all this detail to exist in logs
it does not


any suggestions on how to get this functionality back - broke after upgrade 1.8.9.2 to 11.6 cert 6


[general]



[logfiles ]
console       => notice, warning, error, debug, verbose(15)
messages      => notice, warning, error, debug, error
full          => notice, warning, error, debug, verbose(15)
debug         => debug
syslog.local1 => notice, warning, error,debug, verbose
fax      => notice, warning, error, debug, fax, dtmf, fax





--
Jared Terrell
Network & Telecommunications
Mott Community College
1401 E. Court
Flint, MI 48503
810-762-0545
810-577-7510

[rmudgett at digium.com]

On Thu, Oct 23, 2014 at 10:07 AM, Jared Terrell <jared.terrell@mcc.edu (jared.terrell@mcc.edu)> wrote: