VoIP Mailing List Archives

[scott.haley at edwardj...]

I am trying to transition an application over from a FreePbx box to a Standard build Asterisk 11.6 box. I have a job that creates a call file and plays a sound file. If it detects a voicemail, then it plays it, waits 1 second and replays it.

The FreePbx box works fine but the Standard Asterisk build is dropping the call during the first Voicemail playback and it does not leave the voicemail. Here is the printout of the log file for both boxes.

Free PBX:
[2015-02-10 12:12:34] VERBOSE[10502] pbx.c: -- Executing [XXXXXXXXXX@subMachine:4] Playback("SIP/trunk503out-00009728", "temp/0250002") in new stack
[2015-02-10 12:13:29] VERBOSE[10502] pbx.c: -- Executing [XXXXXXXXXX @subMachine:5] Wait("SIP/trunk503out-00009728", "1") in new stack
[2015-02-10 12:13:30] VERBOSE[10502] pbx.c: -- Executing [XXXXXXXXXX @subMachine:6] Playback("SIP/trunk503out-00009728", "temp/0250002") in new stack

Standard Asterisk Build:
[2015-02-10 15:01:12] VERBOSE[32567][C-0000000f] pbx.c: -- Executing [xxxxxxxxxx @subMachine:1] SendDTMF("SIP/SMtrunk1-0000000f", "w1wwwww") in new stack
[2015-02-10 15:01:16] VERBOSE[32567][C-0000000f] pbx.c: -- Executing [xxxxxxxxxx @subMachine:2] Set("SIP/SMtrunk1-0000000f", "IVR_MSG=temp/0250002") in new stack
[2015-02-10 15:01:16] VERBOSE[32567][C-0000000f] pbx.c: -- Executing [xxxxxxxxxx@subMachine:3] System("SIP/SMtrunk1-0000000f", "/bin/echo -e "xxxxxxxxxx,RUN2,i9,02102015145822,MACHINE,SIP/SMtrunk1-0000000f,02.10.2015 15.01">>log/outbound.txt") in new stack
[2015-02-10 15:01:16] VERBOSE[32567][C-0000000f] pbx.c: -- Executing [xxxxxxxxxx @subMachine:4] Playback("SIP/SMtrunk1-0000000f", "temp/0250002") in new stack
[2015-02-10 15:01:16] VERBOSE[32567][C-0000000f] file.c: -- <SIP/SMtrunk1-0000000f> Playing 'temp/0250002.slin' (language 'en')
[2015-02-10 15:01:50] VERBOSE[32567][C-0000000f] pbx.c: == Spawn extension (subMachine, xxxxxxxxxx, 4) exited non-zero on 'SIP/SMtrunk1-0000000f'

I copied the context from the FreePbx box over to the new box so the code should be the same. Any help would be appreciated.

Thanks,
Scott




If you are not the intended recipient of this message (including attachments), or if you have received this message in error, immediately notify us and delete it and any attachments.

If you do not wish to receive any email messages from us, excluding administrative communications, please email this request to messages@edwardjones.com along with the email address you wish to unsubscribe.

For important additional information related to this email, visit www.edwardjones.com/US_email_disclosure. Edward D. Jones & Co., L.P. d/b/a Edward Jones, 12555 Manchester Road, St. Louis, MO 63131 © Edward Jones. All rights reserved.

[scott.haley at edwardj...]

One follow-up. At the end of the call, after it dis-connects I get the following error:

[2015-02-10 15:33:42] NOTICE[4524]: pbx_spool.c:402 attempt_thread: Call completed to SIP/SMtrunk1/xxxxxxxxxx

Thanks,
Scott Haley
5-2244


From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Haley,Scott A
Sent: Tuesday, February 10, 2015 3:15 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Dial Plan Issue



I am trying to transition an application over from a FreePbx box to a Standard build Asterisk 11.6 box. I have a job that creates a call file and plays a sound file. If it detects a voicemail, then it plays it, waits 1 second and replays it.

The FreePbx box works fine but the Standard Asterisk build is dropping the call during the first Voicemail playback and it does not leave the voicemail. Here is the printout of the log file for both boxes.

Free PBX:
[2015-02-10 12:12:34] VERBOSE[10502] pbx.c: -- Executing [XXXXXXXXXX@subMachine:4] Playback("SIP/trunk503out-00009728", "temp/0250002") in new stack
[2015-02-10 12:13:29] VERBOSE[10502] pbx.c: -- Executing [XXXXXXXXXX @subMachine:5] Wait("SIP/trunk503out-00009728", "1") in new stack
[2015-02-10 12:13:30] VERBOSE[10502] pbx.c: -- Executing [XXXXXXXXXX @subMachine:6] Playback("SIP/trunk503out-00009728", "temp/0250002") in new stack

Standard Asterisk Build:
[2015-02-10 15:01:12] VERBOSE[32567][C-0000000f] pbx.c: -- Executing [xxxxxxxxxx @subMachine:1] SendDTMF("SIP/SMtrunk1-0000000f", "w1wwwww") in new stack
[2015-02-10 15:01:16] VERBOSE[32567][C-0000000f] pbx.c: -- Executing [xxxxxxxxxx @subMachine:2] Set("SIP/SMtrunk1-0000000f", "IVR_MSG=temp/0250002") in new stack
[2015-02-10 15:01:16] VERBOSE[32567][C-0000000f] pbx.c: -- Executing [xxxxxxxxxx@subMachine:3] System("SIP/SMtrunk1-0000000f", "/bin/echo -e "xxxxxxxxxx,RUN2,i9,02102015145822,MACHINE,SIP/SMtrunk1-0000000f,02.10.2015 15.01">>log/outbound.txt") in new stack
[2015-02-10 15:01:16] VERBOSE[32567][C-0000000f] pbx.c: -- Executing [xxxxxxxxxx @subMachine:4] Playback("SIP/SMtrunk1-0000000f", "temp/0250002") in new stack
[2015-02-10 15:01:16] VERBOSE[32567][C-0000000f] file.c: -- <SIP/SMtrunk1-0000000f> Playing 'temp/0250002.slin' (language 'en')
[2015-02-10 15:01:50] VERBOSE[32567][C-0000000f] pbx.c: == Spawn extension (subMachine, xxxxxxxxxx, 4) exited non-zero on 'SIP/SMtrunk1-0000000f'

I copied the context from the FreePbx box over to the new box so the code should be the same. Any help would be appreciated.

Thanks,
Scott






If you are not the intended recipient of this message (including attachments), or if you have received this message in error, immediately notify us and delete it and any attachments.



If you do not wish to receive any email messages from us, excluding administrative communications, please email this request to messages@edwardjones.com (messages@edwardjones.com) along with the email address you wish to unsubscribe.



For important additional information related to this email, visit www.edwardjones.com/US_email_disclosure. Edward D. Jones & Co., L.P. d/b/a Edward Jones, 12555 Manchester Road, St. Louis, MO 63131 © Edward Jones. All rights reserved.