VoIP Mailing List Archives :: View topic - [asterisk-users] Asterisk 13

Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community

[asterisk-users] Asterisk 13 - realtime + static modes

VoIP Mailing List Archives Forum Index -> Asterisk Users

View previous topic :: View next topic

Author

Message

no7find at gmail.com
Guest

Posted: Mon Feb 02, 2015 10:08 am Post subject: [asterisk-users] Asterisk 13 - realtime + static modes

Hello, In Asterisk 11 it is possible to set extensions on DB table (sipppers) and also in sip.conf. But in Asterisk 13 apparently this is not possible: as I tried to set in ps_endpoints and also in pjsip.conf but only the realtime endpoints are loaded. Is there a way to use realtime + static modes at the same time for the ps_endpoints lookup using PJSIP. Thanks

jcolp at digium.com
Guest

Posted: Mon Feb 02, 2015 10:12 am Post subject: [asterisk-users] Asterisk 13 - realtime + static modes

Sunny wrote:

Quote:

Hello,

In Asterisk 11 it is possible to set extensions on DB table (sipppers)
and also in sip.conf.

But in Asterisk 13 apparently this is not possible: as I tried to set in
ps_endpoints and also in pjsip.conf but only the realtime endpoints are
loaded.

Is there a way to use realtime + static modes at the same time for the
ps_endpoints lookup using PJSIP.

Yes. The sorcery.conf file controls this and allows specifying multiple
things. It would be like follows:

[res_pjsip]
endpoint=realtime,ps_endpoints
endpoint=config,pjsip.conf,criteria=type=endpoint

Realtime will get queried first followed by the configuration file. If
you want to change the order then swap their placement.

Cheers,

--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

no7find at gmail.com
Guest

Posted: Mon Feb 02, 2015 12:18 pm Post subject: [asterisk-users] Asterisk 13 - realtime + static modes

On 2 February 2015 at 15:12, Joshua Colp <jcolp@digium.com (jcolp@digium.com)> wrote:

Quote:

Sunny wrote:

Quote:

Yes. The sorcery.conf file controls this and allows specifying multiple things. It would be like follows:

[res_pjsip]
endpoint=realtime,ps_endpoints
endpoint=config,pjsip.conf,criteria=type=endpoint

Realtime will get queried first followed by the configuration file. If you want to change the order then swap their placement.

Cheers,

--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

Yeah, it works now. Thank you Joshua!

However I'm getting following error:
[2015-02-02 16:55:56] ERROR[32605] res_sorcery_config.c: Could not create an object of type 'endpoint' with id '192.168.1.3' from configuration file 'pjsip.conf'

my endpoint is defined as:
[192.168.1.3]
type = endpoint
transport=simpletrans
context = inbound
dtmf_mode = inband
disallow = all
allow = alaw
allow = ulaw
aors = 192.168.1.3

Thanks,

jcolp at digium.com
Guest

Posted: Mon Feb 02, 2015 12:23 pm Post subject: [asterisk-users] Asterisk 13 - realtime + static modes

Sunny wrote:

<snip>

Quote:

Yeah, it works now. Thank you Joshua!

However I'm getting following error:
[2015-02-02 16:55:56] ERROR[32605] res_sorcery_config.c: Could not
create an object of type 'endpoint' with id '192.168.1.3' from
configuration file 'pjsip.conf'

my endpoint is defined as:
[192.168.1.3]
type = endpoint
transport=simpletrans
context = inbound
dtmf_mode = inband
disallow = all
allow = alaw
allow = ulaw
aors = 192.168.1.3

Does "pjsip show endpoints" show it? I think there may be a regression
or something where it is trying to create endpoints before it can...
leading to an error message that eventually gets resolved.

--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

no7find at gmail.com
Guest

Posted: Mon Feb 02, 2015 12:30 pm Post subject: [asterisk-users] Asterisk 13 - realtime + static modes

On 2 February 2015 at 17:23, Joshua Colp <jcolp@digium.com (jcolp@digium.com)> wrote:

Quote:

Sunny wrote:

<snip>

Quote:

Yeah, it works now. Thank you Joshua!

However I'm getting following error:
[2015-02-02 16:55:56] ERROR[32605] res_sorcery_config.c: Could not
create an object of type 'endpoint' with id '192.168.1.3' from
configuration file 'pjsip.conf'

my endpoint is defined as:
[192.168.1.3]
type = endpoint
transport=simpletrans
context = inbound
dtmf_mode = inband
disallow = all
allow = alaw
allow = ulaw
aors = 192.168.1.3

Does "pjsip show endpoints" show it? I think there may be a regression or something where it is trying to create endpoints before it can... leading to an error message that eventually gets resolved.

--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

Yeah, that's the case. The endpoint is listed in pjsip show endpoints.

Thanks

jcolp at digium.com
Guest

Posted: Mon Feb 02, 2015 12:37 pm Post subject: [asterisk-users] Asterisk 13 - realtime + static modes

Sunny wrote:

<snip>

Quote:

Yeah, that's the case. The endpoint is listed in pjsip show endpoints.

Glad to hear that! I've created an issue[1] to track the underlying
problem there.

Cheers,

[1] https://issues.asterisk.org/jira/browse/ASTERISK-24748

--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

Display posts from previous:

	VoIP Mailing List Archives Forum Index -> Asterisk Users	All times are GMT - 5 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum