VoIP Mailing List Archives

[rumatech at gmail.com]

Hi, all

I am trying to figure out how to forward incoming PSTN call on SPA3000
to VoIP extension(s).

Basically, I have converted my home to VoIP. I have normal phone
(connected to SPA3000) and couple of IP phones. All call coming from
VoIP DID do ring all phones (analogue via SPA3000 and IP ones). Now I
need to do same thing for incoming PSTN calls.
I have enabled gateway function in SPA3000 and configured PSTN as a
VoIP extension in asterisk, but on incoming PSTN call, I do not see
anything on asterisk console.
Can someone point me into the right direction?
Thanks,
Rudolf

[ari197516 at yahoo.com]

Hi,

I don't know spa3000, but in spa-3102, to transfer call to PSTN to asterisk i change the following, i'm new in asterisk but i think it's correct:

PSTN tab,
DIAL PLAN 8: S0<:1 at 192.168.2.2:5060 (ip of asterisk)
Proxy: 192.168.2.2:5060
outbound proxy: left blank
sip udp: 5061
subscriber information: pstn
user id: pstn
password: pstn
register: no
ans/call/without reg: (put all on yes)
PSTN Caller Default DP:8

FXO Timer Values (sec)
PSTN Answer Delay: 5 (give time to catch the CID)

In asterisk create the pstn context in sip.conf and the extension 1. is good to trace the ethernet port and make ring pstn to see if spa is sending UDP packets to asterisk.

i send you the full spa3102 config html if it help.

Here more info:

http://forum.voxilla.com/linksys-sipura-voip-support-forum/starter-spa3102-asterisk-setup-18612.html

hugs
----- Original Message ----
From: Rudolf Ladyzhenskii <rumatech at gmail.com>
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com>
Sent: Thursday, January 24, 2008 9:35:03 PM
Subject: [asterisk-users] SPA3000 -- PSTN to VoIP


Hi, all

I am trying to figure out how to forward incoming PSTN call on SPA3000
to VoIP extension(s).

Basically, I have converted my home to VoIP. I have normal phone
(connected to SPA3000) and couple of IP phones. All call coming from
VoIP DID do ring all phones (analogue via SPA3000 and IP ones). Now I
need to do same thing for incoming PSTN calls.
I have enabled gateway function in SPA3000 and configured PSTN as a
VoIP extension in asterisk, but on incoming PSTN call, I do not see
anything on asterisk console.
Can someone point me into the right direction?


Thanks,
Rudolf

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users





____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping