geisj at pagestation.com Guest
|
Posted: Thu Feb 19, 2015 12:54 pm Post subject: [asterisk-users] snom devices specifically PA1 |
|
|
I have a snom PA1, works fine.I am trying to get it work with multicast and asterisk 11.16
my other devices are accepting multicast.
When I enable multicast on the browser interface and enter the IP: port
it works.
However - when I enter that data on the TFTP config file - it is not present.
I used the setting tab - export the config file, used that file
and other settings work - like the extension - but just not the multicast data.
relevant part of file:
<multicast_listen perm="">on</multicast_listen>
<mc_address idx="1" perm="" >239.168.3.10:11000</mc_address>
<mc_address idx="2" perm="" >239.168.3.9:1000</mc_address>
<mc_address idx="3" perm="" >239.168.3.8:9000</mc_address>
<mc_address idx="4" perm="" >239.168.3.7:8000</mc_address>
<mc_address idx="5" perm="" >239.168.3.6:7000</mc_address>
<mc_address idx="6" perm="" >239.168.3.5:6000</mc_address>
<mc_address idx="7" perm="" >239.168.3.4:5000</mc_address>
<mc_address idx="8" perm="" >239.168.3.3:4000</mc_address>
<mc_address idx="9" perm="" >239.168.3.2:3000</mc_address>
<mc_address idx="10" perm="" >239.168.3.1:2000</mc_address>
any one run into this?
Any ideas?
Jerry |
|