RyanT at OscarWinski.com
Guest
|
 Posted: Fri Sep 25, 2015 9:46 am Post subject: [asterisk-users] Answering analog call |
 |
|
I have a TDM400P analog card in my asterisk server. I haven’t used analog for a while. The caller hears at least two rings before my 312 extension gets rang internally. Does it usually take that long? Below is my relevant dialplan. Also callerID isn’t working but that might just be the test analog line I have.
exten => s,1,Log(NOTICE, Incoming call from ${CALLERID(all)})
same => n,Answer
same => n,Macro(stdexten,312,PJSIP/312)
same => n,Hangup()
[macro-stdexten];
;
; Standard extension macro:
; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well
; ${ARG2} - Device(s) to ring
;
exten => s,1,Dial(${ARG2},30) ; Ring the interface, 30 seconds maximum
exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)
exten => s-NOANSWER,1,Voicemail(${ARG1},u) ; If unavailable, send to voicemail w/ unavail announce
exten => s-NOANSWER,2,Goto(default,s,1) ; If they press #, return to start
exten => s-BUSY,1,Voicemail(${ARG1},b) ; If busy, send to voicemail w/ busy announce
exten => s-BUSY,2,Goto(default,s,1) ; If they press #, return to start
exten => _s-.,1,Goto(s-NOANSWER,1) ; Treat anything else as no answer
exten => a,1,VoicemailMain(${ARG1}) ; If they press *, send the user into VoicemailMain |
|
Search
