VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
dplatt at radagast.org
Guest
|
 Posted: Sun Jan 31, 2016 1:51 pm Post subject: [asterisk-users] 11.21.0 : echo woes : can't installcancelle |
 |
|
| Quote: | OK. Maybe an echo canceller won't make any difference. But why does the
remote side _always_ hear an echo if we use a local dahdi extension,
and _never_ when we use a local SIP extension ??
|
The echo that the remote called hears, might be of either electrical or
acoustic origin.
If electrical, it would indicate a mismatch between the line impedance of
the Dahdi card or device and that of the phone extensions being used. You
might be able to adjust jumpers or settings on the Dahdi card to select an
impedance which matches the phone better, and reduce the echo. Or, use
a different type of phone, having a better-matched hybrid in it.
If acoustic, it would probably be due to bad phone handsets. I've seen
quite a few cheap phones where sound coming out of the speaker could
travel through the handset body (like going through a pipe) and reach the
back side of the microphone and be picked up by the mike. Better phone
handsets don't have this problem; those that do can sometimes be improved
by stuffing the inside of the handset with some sort of damping material
such as cotton wading or Dacron pillow stuffing.
Speakerphones are, of course, notorious for generating echo.
SIP phones won't have the impedance-mismatch issue at all, and their
handsets may simply be better-designed with respect to acoustic feedback
and leakage problems.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
| Back to top |
|
 |
mcgrathr at mail2web.com
Guest
|
| Posted: Mon Feb 01, 2016 1:47 pm Post subject: [asterisk-users] 11.21.0 : echo woes : can't installcancelle |
|
|
Hi Sean
In case of electrical I think DAHDI card if could have the capability by a combinations of jumpers it will be too hard to set best level, think about it for one or a wide device, could take long time for start-up, and will require to adjust or controller periodically, therefore many terminal devices could have it inside, by changing jumpers or some components to adapt according to electrical line condition
By the other way market analogue terminals mainly follows, to FCC or European standards, I remember these kind of symptom happens with Panasonic KX-TS500, whatever PBX or line it feels echo.
In case of acoustic analogue device it used analogue circuit, SIP used DSP (Digital signal processing circuit) these last one is better than analogue system.
Mc GRATH Ricardo
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
