VoIP Mailing List Archives

[julien at jsansonnens.ch]

Hi list, I am trying to enable SIP SIMPLE communication in my test environment (Asterisk 13.6.0)


I have two problems: 


1. Using messagesend(), I don't want my users to be able to change their own callerid name. I want the name that appears in the ${MESSAGE(from)} to be set by config file, and cannot be overwritten by user's settings. 
in users.conf, setting "callerid=" achieves this goal for voice calls, but not for out-of-band messaging. 
Is there some way to set the "FROM" so that it cannot be overwritten by users ?


2. depending on the transport protocol, the ${MESSAGE(to)} variables changes. If I use UDP, my destination is "sip:user@somedomain.com ([email]sip%3Auser@somedomain.com[/email])", which is good. If I use TLS, then my destination URI becomes "sip:user@somedomain.com ([email]sip%3Auser@somedomain.com[/email]);transport=TLS" which causes some troubles. I would like to remove the transport part, and to keep only the sip:user@domain, how can I do this ? I could play with the cut command, but would like a more elegant way.


thanks a lot for your help, Julien