VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
babas at cfht.hawaii.edu
Guest
|
 Posted: Fri Feb 19, 2016 12:15 pm Post subject: [asterisk-users] Passing Caller ID through Digium Gateway |
 |
|
Hi All,
I've setup a Digium G100 VoIP gateway to replace an internal PCI VoIP
card in our Asterisk PBX. When using the VoIP card the callerid entries
listed in sip.conf were displayed when calling someone over the PSTN.
Now, however, though the gateway it just displays the default number
assigned to our PRI. I'm wondering if anyone having experience with the
Digium gateways can point me in the right direction to have the gateway
respect the callerid entries listed in sip.conf. We are using an older
Asterisk 1.6 build.
Thanks in advanced for the help!!
Ferdinand
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
| Back to top |
|
 |
kevin.larsen at pionee...
Guest
|
| Posted: Fri Feb 19, 2016 1:11 pm Post subject: [asterisk-users] Passing Caller ID through Digium Gateway |
|
|
| Quote: | Hi All,
I've setup a Digium G100 VoIP gateway to replace an internal PCI VoIP
card in our Asterisk PBX. When using the VoIP card the callerid entries
listed in sip.conf were displayed when calling someone over the PSTN.
Now, however, though the gateway it just displays the default number
assigned to our PRI. I'm wondering if anyone having experience with the
Digium gateways can point me in the right direction to have the gateway
respect the callerid entries listed in sip.conf. We are using an older
Asterisk 1.6 build.
|
We use G100 and 200s at a few of our sites and caller id passes through just fine. Check under Configuration -> call routing rules to make sure you don't have a caller ID name and number set in there. You have to take it off of Simple Entry Mode to see the options.
Also, on your SIP Endopoint configuration, under the call settings tab, make sure you have your Caller ID Presentation set correctly. From the help on that option:
Caller ID Presentation:Handles Caller ID presentation on outgoing calls. Allow for prohibiting Caller ID presentation, and defines whether the information has been screened by an authoritative source. Options other than screening, allowed, and prohibited indicate that the Caller ID was provided by the network. ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please visit http://www.symanteccloud.com ______________________________________________________________________ |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
