oza.4h07 at gmail.com
Guest
|
 Posted: Wed May 04, 2016 4:13 am Post subject: [asterisk-users] T.38 with Audiocodes gateway [SOLVED] |
 |
|
2016-05-03 16:43 GMT+02:00 Matt Fredrickson <creslin@digium.com (creslin@digium.com)>:
| Quote: | On Fri, Apr 29, 2016 at 1:34 AM, Olivier <oza.4h07@gmail.com (oza.4h07@gmail.com)> wrote:
| Quote: | Hello,
I'm helping a colleague (*) which has the following setup:
ITSP --- <T.38 capable PJSIP trunk> --- Asterisk 13 --- <PJSIP>--
Audiocodes MP-112 --- <FXO/FXS> --- Fax machine
My issue is the following :
Audiocodes gateway reject INVITEs with 488 Not Acceptable Here
It seems this gateway requires t38 settings to be present in SDP body in the
very first INVITE.
My questions are the following:
1. I expected T.38 to exclusively work with reINVITE where calls are
established as normal voice calls (PCMA/PCMU in SDP, for instance) and then
upgraded to T.38 (when CNG is detected, for instance).
Have you ever heard of T.38 sessions being established right from the start
(ie with T.38 settings in the first INVITE) ?
|
No. It would seem to be extremely broken if it denies a call based on
a lack of T.38 sdp parameters on the initial INVITE.
|
OK
| Quote: |
| Quote: | 2. Is it possible to configure Asterisk to pass T.38 settings in SDP in the
first INVITE it sends ?
3. Any suggestion with Audiocodes gateway ?
|
Look for T.38 settings maybe? See if there is something keeping you
from sending an initial invite with non-T.38 SDP....?
|
Yes, I think issue must come from incorrect Audiocodes settings.
Requiring T.38 settings within first INVITE seems very unusual.
Thank you very much for replying
|
|
Search
