VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
View previous topic :: View next topic |
Author |
Message |
gincantalupo at fgasof... Guest
|
Posted: Fri Feb 15, 2008 6:29 am Post subject: [asterisk-users] Digium stopped TDM400P production: alternat |
|
|
Hi,
Digium stopped to produce TDM400P and the new TDM410 is too new to find
it in our shops. The only alternative available is a "fully-compatible"
Openvox product...but is it really "fully-compatible"? Any experience
about Openvox products (card and zaptel versions, etc...)?
Thank you!
Giorgio. |
|
Back to top |
|
|
kpfleming at digium.com Guest
|
Posted: Fri Feb 15, 2008 7:20 am Post subject: [asterisk-users] Digium stopped TDM400P production: alternat |
|
|
Giorgio Incantalupo wrote:
Quote: | Digium stopped to produce TDM400P and the new TDM410 is too new to find
it in our shops. The only alternative available is a "fully-compatible"
Openvox product...but is it really "fully-compatible"? Any experience
about Openvox products (card and zaptel versions, etc...)?
|
Every distributor that carried the TDM400P should have TDM410s in stock
already. Where are you located, and who do you buy Digium cards from?
--
Kevin P. Fleming
Director of Software Technologies
Digium, Inc. - "The Genuine Asterisk Experience" (TM) |
|
Back to top |
|
|
stotaro at totarotechn... Guest
|
Posted: Fri Feb 15, 2008 7:32 am Post subject: [asterisk-users] Digium stopped TDM400P production: alternat |
|
|
Sangoma makes a good card.
On 2/15/08, Kevin P. Fleming <kpfleming at digium.com> wrote:
Quote: | Giorgio Incantalupo wrote:
Quote: | Digium stopped to produce TDM400P and the new TDM410 is too new to find
it in our shops. The only alternative available is a "fully-compatible"
Openvox product...but is it really "fully-compatible"? Any experience
about Openvox products (card and zaptel versions, etc...)?
|
Every distributor that carried the TDM400P should have TDM410s in stock
already. Where are you located, and who do you buy Digium cards from?
--
Kevin P. Fleming
Director of Software Technologies
Digium, Inc. - "The Genuine Asterisk Experience" (TM)
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
Back to top |
|
|
stotaro at totarotechn... Guest
|
Posted: Fri Feb 15, 2008 8:28 am Post subject: [asterisk-users] Digium stopped TDM400P production: alternat |
|
|
It is fairly easy on a fresh install since the Sangoma ./Setup install
script can create all three configuration files for you.
Thanks,
Steve Totaro
On Fri, Feb 15, 2008 at 8:11 AM, Rob Hillis <rob at hillis.dyndns.org> wrote:
Quote: |
The cards themselves are okay, but the extra level of configuration is a
pain in the proverbial. Zaptel is already double-configured in both
zaptel.conf and zapata.conf (that's not a complaint - I understand the
reason for the separation) but the Sangoma cards require a third level of
configuration in Wanpipe.
Steve Totaro wrote:
Sangoma makes a good card.
On 2/15/08, Kevin P. Fleming <kpfleming at digium.com> wrote:
Giorgio Incantalupo wrote:
Digium stopped to produce TDM400P and the new TDM410 is too new to find
it in our shops. The only alternative available is a "fully-compatible"
Openvox product...but is it really "fully-compatible"? Any experience
about Openvox products (card and zaptel versions, etc...)?
Every distributor that carried the TDM400P should have TDM410s in stock
already. Where are you located, and who do you buy Digium cards from?
--
Kevin P. Fleming
Director of Software Technologies
Digium, Inc. - "The Genuine Asterisk Experience" (TM)
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
Back to top |
|
|
jfinstrom at rhinoequi... Guest
|
Posted: Fri Feb 15, 2008 8:36 am Post subject: [asterisk-users] Digium stopped TDM400P production: alternat |
|
|
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I would say email Kevin what he asked. The problem with switching to a
clone company is you get what you pay for. Sticking with Digium you at
least have support. and 3 clone cards and hours of troubleshooting
later you will wish you hadn't been all cheap.
Rob Hillis wrote:
Quote: | The cards themselves are okay, but the extra level of configuration
is a pain in the proverbial. Zaptel is already double-configured
in both zaptel.conf and zapata.conf (that's not a complaint - I
understand the reason for the separation) but the Sangoma cards
require a /third/ level of configuration in Wanpipe.
Steve Totaro wrote:
Quote: | Sangoma makes a good card.
On 2/15/08, Kevin P. Fleming <kpfleming at digium.com> wrote:
Quote: | Giorgio Incantalupo wrote:
Quote: | Digium stopped to produce TDM400P and the new TDM410 is too
new to find it in our shops. The only alternative available
is a "fully-compatible" Openvox product...but is it really
"fully-compatible"? Any experience about Openvox products
(card and zaptel versions, etc...)?
| Every distributor that carried the TDM400P should have TDM410s
in stock already. Where are you located, and who do you buy
Digium cards from?
-- Kevin P. Fleming Director of Software Technologies Digium,
Inc. - "The Genuine Asterisk Experience" (TM)
_______________________________________________ -- Bandwidth
and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list To UNSUBSCRIBE or update options
visit: http://lists.digium.com/mailman/listinfo/asterisk-users
|
_______________________________________________ -- Bandwidth and
Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list To UNSUBSCRIBE or update options
visit: http://lists.digium.com/mailman/listinfo/asterisk-users
| !DSPAM:47b591c7282271152562594!
----------------------------------------------------------------------
_______________________________________________ -- Bandwidth and
Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
!DSPAM:47b591c7282271152562594!
|
- --
James Finstrom
Rhino Equipment Corp.
Tel: 1-800-785-7073 ext. 6344
FAX: +1 (480) 961-1826
IP: asterisk.rhinoequipment.com ext 6344
FWD: 633686 ext 6344
THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY
MATERIAL and is thus for use only by the intended recipient. If you
received
this in error, please contact the sender and delete the email and its
attachments from all computers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFHtZVZdloC7YyaIOoRAuHXAJ0WD4UCOQzea43CCVXG32hDnxaADgCdHRUe
34tNh/zgUxxoOkAaQbB7z5Y=
=TlLb
-----END PGP SIGNATURE----- |
|
Back to top |
|
|
jfinstrom at rhinoequi... Guest
|
Posted: Fri Feb 15, 2008 9:36 am Post subject: [asterisk-users] Digium stopped TDM400P production: alternat |
|
|
Steve,
Yes I work for Rhino that is no
Secret. If you read the post I was responding to the thread not pimping my own products. I am not sure if your a Sangoma fanboy or employee since you are apparently offended by my response, however he wasn't asking to be sold to he was asking about specific products. So there it is yes I work for Rhino and I could have easily given one of our italian distributors but he didn't ask for that. It is not appropriate to troll the list and push your products unsolicited. If someone is looking for a recommendation for a card brand fine. If they need a solution like ADID or they need to accommodate funky CPC signals from their telco which Rhino does fine it is on subject. If someone asks should I use openvox to replace my digium you don't pimp your product because it wasn't asked for. If you want my honest opinion. I prefer people use Rhino products. I believe our products and support are superior but if you don't use our cards use Digium. If your reply is any indication on how Sandoma works I can honestly say go use a cheap clone before sangomaN they may not support you but at least they are open about being here just for the money.
James Finstrom
Rhino Equipment Corp.
http://www.rhinoequipment.com
-----Original Message-----
From: Steve Totaro <stotaro at mail.schoffstall.com>
Date: Fri, 15 Feb 2008 08:45:50
To:Asterisk Users Mailing List - Non-Commercial Discussion<asterisk-users at lists.digium.com>
Subject: Re: [asterisk-users] Digium stopped TDM400P production: alternatives??
James,
If you were replying to the original post about Openvox or specified
that is what you were referring to, maybe I would not take issue but to
reply to a suggesting to use Sangoma with what you did is absolutely
misleading. There is nothing "cheap" or "clone" about Sangoma's cards.
"asterisk.rhinoequipment.com" hmmmmm.
Thanks,
Steve Totaro
James Finstrom wrote:
Quote: | -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I would say email Kevin what he asked. The problem with switching to a
clone company is you get what you pay for. Sticking with Digium you at
least have support. and 3 clone cards and hours of troubleshooting
later you will wish you hadn't been all cheap.
Rob Hillis wrote:
Quote: | The cards themselves are okay, but the extra level of configuration
is a pain in the proverbial. Zaptel is already double-configured
in both zaptel.conf and zapata.conf (that's not a complaint - I
understand the reason for the separation) but the Sangoma cards
require a /third/ level of configuration in Wanpipe.
Steve Totaro wrote:
Quote: | Sangoma makes a good card.
On 2/15/08, Kevin P. Fleming <kpfleming at digium.com> wrote:
Quote: | Giorgio Incantalupo wrote:
Quote: | Digium stopped to produce TDM400P and the new TDM410 is too
new to find it in our shops. The only alternative available
is a "fully-compatible" Openvox product...but is it really
"fully-compatible"? Any experience about Openvox products
(card and zaptel versions, etc...)?
| Every distributor that carried the TDM400P should have TDM410s
in stock already. Where are you located, and who do you buy
Digium cards from?
-- Kevin P. Fleming Director of Software Technologies Digium,
Inc. - "The Genuine Asterisk Experience" (TM)
|
|
|
|
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
!DSPAM:47b59f18311805637012918! |
|
Back to top |
|
|
stotaro at totarotechn... Guest
|
Posted: Fri Feb 15, 2008 10:42 am Post subject: [asterisk-users] Digium stopped TDM400P production: alternat |
|
|
James,
Huh? Trying to understand your rambling reply....
I just like Sangoma because they "just work" and have excellent
support, I have no affiliation with them except being a very happy
customer.
You get what you pay for right? I also think Adtran or Adit are great
products. Not sure about Rhino especially after your irrational
response.
Some spokesman, I will stick with Adtran and Adit, not some cheap knock-off.
Thanks,
Steve Totaro
On Fri, Feb 15, 2008 at 9:36 AM, James Finstrom
<jfinstrom at rhinoequipment.com> wrote:
Quote: | Steve,
Yes I work for Rhino that is no
Secret. If you read the post I was responding to the thread not pimping my own products. I am not sure if your a Sangoma fanboy or employee since you are apparently offended by my response, however he wasn't asking to be sold to he was asking about specific products. So there it is yes I work for Rhino and I could have easily given one of our italian distributors but he didn't ask for that. It is not appropriate to troll the list and push your products unsolicited. If someone is looking for a recommendation for a card brand fine. If they need a solution like ADID or they need to accommodate funky CPC signals from their telco which Rhino does fine it is on subject. If someone asks should I use openvox to replace my digium you don't pimp your product because it wasn't asked for. If you want my honest opinion. I prefer people use Rhino products. I believe our products and support are superior but if you don't use our cards use Digium. If your reply is any indication on how Sandoma works I can honestly say go use a cheap clone before sangomaN they may not support you but at least they are open about being here just for the money.
James Finstrom
Rhino Equipment Corp.
http://www.rhinoequipment.com
-----Original Message-----
From: Steve Totaro <stotaro at mail.schoffstall.com>
Date: Fri, 15 Feb 2008 08:45:50
To:Asterisk Users Mailing List - Non-Commercial Discussion<asterisk-users at lists.digium.com>
Subject: Re: [asterisk-users] Digium stopped TDM400P production: alternatives??
James,
If you were replying to the original post about Openvox or specified
that is what you were referring to, maybe I would not take issue but to
reply to a suggesting to use Sangoma with what you did is absolutely
misleading. There is nothing "cheap" or "clone" about Sangoma's cards.
"asterisk.rhinoequipment.com" hmmmmm.
Thanks,
Steve Totaro
James Finstrom wrote:
Quote: | -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I would say email Kevin what he asked. The problem with switching to a
clone company is you get what you pay for. Sticking with Digium you at
least have support. and 3 clone cards and hours of troubleshooting
later you will wish you hadn't been all cheap.
Rob Hillis wrote:
Quote: | The cards themselves are okay, but the extra level of configuration
is a pain in the proverbial. Zaptel is already double-configured
in both zaptel.conf and zapata.conf (that's not a complaint - I
understand the reason for the separation) but the Sangoma cards
require a /third/ level of configuration in Wanpipe.
Steve Totaro wrote:
Quote: | Sangoma makes a good card.
On 2/15/08, Kevin P. Fleming <kpfleming at digium.com> wrote:
Quote: | Giorgio Incantalupo wrote:
Quote: | Digium stopped to produce TDM400P and the new TDM410 is too
new to find it in our shops. The only alternative available
is a "fully-compatible" Openvox product...but is it really
"fully-compatible"? Any experience about Openvox products
(card and zaptel versions, etc...)?
| Every distributor that carried the TDM400P should have TDM410s
in stock already. Where are you located, and who do you buy
Digium cards from?
-- Kevin P. Fleming Director of Software Technologies Digium,
Inc. - "The Genuine Asterisk Experience" (TM)
|
|
|
|
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
!DSPAM:47b59f18311805637012918!
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
Back to top |
|
|
jfinstrom at rhinoequi... Guest
|
Posted: Fri Feb 15, 2008 11:01 am Post subject: [asterisk-users] Digium stopped TDM400P production: alternat |
|
|
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Enough Said
Buy Digium, or Rhino, or a Knock off but avoid the witch doctor....
Steve Totaro wrote:
Quote: | James,
Huh? Trying to understand your rambling reply....
I just like Sangoma because they "just work" and have excellent
support, I have no affiliation with them except being a very happy
customer.
You get what you pay for right? I also think Adtran or Adit are great
products. Not sure about Rhino especially after your irrational
response.
Some spokesman, I will stick with Adtran and Adit, not some cheap
| knock-off..
Quote: |
Thanks,
Steve Totaro
On Fri, Feb 15, 2008 at 9:36 AM, James Finstrom
<jfinstrom at rhinoequipment.com> wrote:
Quote: | Steve,
Yes I work for Rhino that is no
Secret. If you read the post I was responding to the thread not
|
| pimping my own products. I am not sure if your a Sangoma fanboy or
employee since you are apparently offended by my response, however he
wasn't asking to be sold to he was asking about specific products. So
there it is yes I work for Rhino and I could have easily given one of
our italian distributors but he didn't ask for that. It is not
appropriate to troll the list and push your products unsolicited. If
someone is looking for a recommendation for a card brand fine. If they
need a solution like ADID or they need to accommodate funky CPC signals
from their telco which Rhino does fine it is on subject. If someone asks
should I use openvox to replace my digium you don't pimp your product
because it wasn't asked for. If you want my honest opinion. I prefer
people use Rhino products. I believe our products and support are
superior but if you don't use our cards use Digium. If your reply is any
indication on how Sandoma works I can honestly say go use a cheap clone
before sangomaN they may not support you but at least they are open
about being here just for the money.
Quote: | Quote: |
James Finstrom
Rhino Equipment Corp.
http://www.rhinoequipment.com
-----Original Message-----
From: Steve Totaro <stotaro at mail.schoffstall.com>
Date: Fri, 15 Feb 2008 08:45:50
To:Asterisk Users Mailing List - Non-Commercial
|
| Discussion<asterisk-users at lists.digium.com>
Quote: | Quote: | Subject: Re: [asterisk-users] Digium stopped TDM400P production:
|
| alternatives??
Quote: | Quote: |
James,
If you were replying to the original post about Openvox or specified
that is what you were referring to, maybe I would not take issue but to
reply to a suggesting to use Sangoma with what you did is absolutely
misleading. There is nothing "cheap" or "clone" about Sangoma's cards.
"asterisk.rhinoequipment.com" hmmmmm.
Thanks,
Steve Totaro
James Finstrom wrote:
Quote: | -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I would say email Kevin what he asked. The problem with switching to a
clone company is you get what you pay for. Sticking with Digium you at
least have support. and 3 clone cards and hours of troubleshooting
later you will wish you hadn't been all cheap.
Rob Hillis wrote:
Quote: | The cards themselves are okay, but the extra level of configuration
is a pain in the proverbial. Zaptel is already double-configured
in both zaptel.conf and zapata.conf (that's not a complaint - I
understand the reason for the separation) but the Sangoma cards
require a /third/ level of configuration in Wanpipe.
Steve Totaro wrote:
Quote: | Sangoma makes a good card.
On 2/15/08, Kevin P. Fleming <kpfleming at digium.com> wrote:
Quote: | Giorgio Incantalupo wrote:
Quote: | Digium stopped to produce TDM400P and the new TDM410 is too
new to find it in our shops. The only alternative available
is a "fully-compatible" Openvox product...but is it really
"fully-compatible"? Any experience about Openvox products
(card and zaptel versions, etc...)?
| Every distributor that carried the TDM400P should have TDM410s
in stock already. Where are you located, and who do you buy
Digium cards from?
-- Kevin P. Fleming Director of Software Technologies Digium,
Inc. - "The Genuine Asterisk Experience" (TM)
|
|
|
|
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
!DSPAM:47b5b32338121804284693!
|
- --
James Finstrom
Rhino Equipment Corp.
Tel: 1-800-785-7073 ext. 6344
FAX: +1 (480) 961-1826
IP: asterisk.rhinoequipment.com ext 6344
FWD: 633686 ext 6344
THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY
MATERIAL and is thus for use only by the intended recipient. If you
received
this in error, please contact the sender and delete the email and its
attachments from all computers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFHtbaodloC7YyaIOoRAmXPAJ9vxeZVpIc4t+XEAO0yzIYz2yuyEQCdF5nk
xC1IhJ61nxl0h/2wVWMQbY0=
=xIwP
-----END PGP SIGNATURE----- |
|
Back to top |
|
|
Guest
|
Posted: Fri Feb 15, 2008 2:02 pm Post subject: [asterisk-users] Digium stopped TDM400P production: alternat |
|
|
There are some tdm400 cards on ebay, http://search.ebay.com/tdm400
Moj
Giorgio Incantalupo wrote:
Quote: | Hi,
Digium stopped to produce TDM400P and the new TDM410 is too new to find
it in our shops. The only alternative available is a "fully-compatible"
Openvox product...but is it really "fully-compatible"? Any experience
about Openvox products (card and zaptel versions, etc...)?
Thank you!
Giorgio.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
Back to top |
|
|
asterisk-users at list... Guest
|
Posted: Sat Feb 16, 2008 12:53 am Post subject: [asterisk-users] Digium stopped TDM400P production: alternat |
|
|
You are kidding, right ???
A small user that just buys one card won't get a good support from
Digium. It'll be just a waste of time on the phone.
Practically any manufacturer gives similar support including ssh'ing
in the users box.
Right now they push the user to buy a 4 channel echo canceller which
you can get from Octasic for $40. The card with 4 ports is retail
around $640.
You can get OpenVox or another brand TDM400P compatible for 1/3 of
that + $40 for echo canceller. Now that's a Digium high marigin right there
.. someone has to pay the CEO salary and the mortgage for a
new building
cheers
On 2/15/08, James Finstrom <jfinstrom at rhinoequipment.com> wrote:
Quote: | -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I would say email Kevin what he asked. The problem with switching to a
clone company is you get what you pay for. Sticking with Digium you at
least have support. and 3 clone cards and hours of troubleshooting
later you will wish you hadn't been all cheap. |
|
|
Back to top |
|
|
tilghman at mail.jeffa... Guest
|
Posted: Sat Feb 16, 2008 2:07 am Post subject: [asterisk-users] Digium stopped TDM400P production: alternat |
|
|
On Friday 15 February 2008 23:53:19 asterisk-users-bounces at lists.digium.com
wrote:
Quote: | You are kidding, right ???
A small user that just buys one card won't get a good support from
Digium. It'll be just a waste of time on the phone.
|
Do you have experience with this or are you just talking out of your ass?
Digium support prides itself on giving customers who buy even just a single
card the best possible support.
Quote: | Practically any manufacturer gives similar support including ssh'ing
in the users box.
|
Really? Which manufacturers, specifically, will allow you to call up, get
remote assistance, and help you get the card working like this?
I'd also like to know why you're posting anonymously, instead of standing
behind your words.
--
Tilghman |
|
Back to top |
|
|
ira at extrasensory.com Guest
|
Posted: Sat Feb 16, 2008 2:51 am Post subject: [asterisk-users] Digium stopped TDM400P production: alternat |
|
|
At 11:07 PM 2/15/2008, you wrote:
Quote: | Really? Which manufacturers, specifically, will allow you to call up, get
remote assistance, and help you get the card working like this?
|
Well, Digium did this for me when I had trouble getting something to
work right with my TDM04. Took about 5 minutes with support logged in
and all was well in my world.
Ira, a happy Digium customer! |
|
Back to top |
|
|
stotaro at totarotechn... Guest
|
Posted: Sat Feb 16, 2008 7:16 am Post subject: [asterisk-users] Digium stopped TDM400P production: alternat |
|
|
I am looking to do just this. An unbiased comparison of hardware.
And as much as possible, an unbiased comparison of support.
I would like assistance in this regard. I would need help with
unbiased testing methodology.
I have already had two companies contact me directly offering hardware
to use for testing. Any and all manufacturers are welcome to
participate.
I figure with the help of someone (a respected community member) who
knows how to implement objective testing methods, and sticking to
those detailed and public methods, we can publish some real
comparisons.
I know that I may be regarded as a "Sangoma Fanboy" but I think an
unbiased head to head comparison could easily be achieved if all
testing methods are neutral, documented, public, and strictly adhered
to and done in conjunction with someone who has good testing methods
and is truly vendor neutral.
Thanks,
Steve Totaro
On Feb 15, 2008 10:21 PM, shadowym <shadowym at hotmail.com> wrote:
Quote: | How about a technical comparision. What makes the Rhino better than the Sangoma?
On a scale of 1 to 10 I would give Sangoma a 9 for support based on personal experience so I strongly disagree with that part of your argument.
-----Original Message-----
From: James Finstrom [mailto:jfinstrom at rhinoequipment.com]
Sent: Friday, February 15, 2008 6:37 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Digium stopped TDM400P production: alternatives??
Steve,
Yes I work for Rhino that is no
Secret. If you read the post I was responding to the thread not pimping my own products. I am not sure if your a Sangoma fanboy or employee since you are apparently offended by my response, however he wasn't asking to be sold to he was asking about specific products. So there it is yes I work for Rhino and I could have easily given one of our italian distributors but he didn't ask for that. It is not appropriate to troll the list and push your products unsolicited. If someone is looking for a recommendation for a card brand fine. If they need a solution like ADID or they need to accommodate funky CPC signals from their telco which Rhino does fine it is on subject. If someone asks should I use openvox to replace my digium you don't pimp your product because it wasn't asked for. If you want my honest opinion. I prefer people use Rhino products. I believe our products and support are superior but if you don't use our cards use Digium. If your reply is any indication on how Sandoma works I can honestly say go use a cheap clone before sangomaN they may not support you but at least they are open about being here just for the money.
James Finstrom
Rhino Equipment Corp.
http://www.rhinoequipment.com
-----Original Message-----
From: Steve Totaro <stotaro at mail.schoffstall.com>
Date: Fri, 15 Feb 2008 08:45:50
To:Asterisk Users Mailing List - Non-Commercial Discussion<asterisk-users at lists.digium.com>
Subject: Re: [asterisk-users] Digium stopped TDM400P production: alternatives??
James,
If you were replying to the original post about Openvox or specified
that is what you were referring to, maybe I would not take issue but to
reply to a suggesting to use Sangoma with what you did is absolutely
misleading. There is nothing "cheap" or "clone" about Sangoma's cards.
"asterisk.rhinoequipment.com" hmmmmm.
Thanks,
Steve Totaro
James Finstrom wrote:
Quote: | -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I would say email Kevin what he asked. The problem with switching to a
clone company is you get what you pay for. Sticking with Digium you at
least have support. and 3 clone cards and hours of troubleshooting
later you will wish you hadn't been all cheap.
Rob Hillis wrote:
Quote: | The cards themselves are okay, but the extra level of configuration
is a pain in the proverbial. Zaptel is already double-configured
in both zaptel.conf and zapata.conf (that's not a complaint - I
understand the reason for the separation) but the Sangoma cards
require a /third/ level of configuration in Wanpipe.
Steve Totaro wrote:
Quote: | Sangoma makes a good card.
On 2/15/08, Kevin P. Fleming <kpfleming at digium.com> wrote:
Quote: | Giorgio Incantalupo wrote:
Quote: | Digium stopped to produce TDM400P and the new TDM410 is too
new to find it in our shops. The only alternative available
is a "fully-compatible" Openvox product...but is it really
"fully-compatible"? Any experience about Openvox products
(card and zaptel versions, etc...)?
| Every distributor that carried the TDM400P should have TDM410s
in stock already. Where are you located, and who do you buy
Digium cards from?
-- Kevin P. Fleming Director of Software Technologies Digium,
Inc. - "The Genuine Asterisk Experience" (TM)
|
|
|
|
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
!DSPAM:47b59f18311805637012918!
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|