VoIP Mailing List Archives

[aina.mestre at airenet...]

Good morning,

I would like to know to which file does freeswitch read the status of a profile. Because even if I have my PBX registered against Freeswitch with user and password or peers, and I can make calls normally. If i write “fs_cli -x “sofia status”” it appers there is nothing registered.

Thanks in advance

[avi at avimarcus.net]

It sounds like you want `sofia status...`

`sofia <status|xmlstatus> profile <name> [reg [<contact str>]] | [pres <pres str>] | [user <user@domain>]`



So for plain text output to check all active registrations on the 'internal' profile, do:
`sofia status profile internal reg`
(You can get xmlstatus returned instead, or filter for specific results)






-Avi Marcus










On Mon, Nov 7, 2022 at 2:25 PM Aina Mestre <aina.mestre@airenetworks.es (aina.mestre@airenetworks.es)> wrote:

[brian at freeswitch.com]

Aina,

The correct command is 'sofia status profile <profile_name> reg'


On Mon, Nov 7, 2022 at 6:31 AM Aina Mestre <aina.mestre@airenetworks.es (aina.mestre@airenetworks.es)> wrote:

[brian at freeswitch.com]

HAHA, we both replied within the same minute. . 

Happy FreeSWITCHing.


On Mon, Nov 7, 2022 at 7:08 AM Avi Marcus <avi@avimarcus.net (avi@avimarcus.net)> wrote:

[aina.mestre at airenet...]

Hi,
Yeah i know that, the problema is that is says:



De: FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org> En nombre de Brian West
Enviado el: lunes, 7 de noviembre de 2022 14:41
Para: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org>
Asunto: Re: [Freeswitch-users] Sofia Status



Este e-mail fue originado fuera de Aire Networks. Ayúdanos a mantener segura nuestra empresa. Por favor, extrema las medidas de seguridad con los adjuntos, los enlaces o las solicitudes que pueda contener.


HAHA, we both replied within the same minute. .


Happy FreeSWITCHing.



On Mon, Nov 7, 2022 at 7:08 AM Avi Marcus <avi@avimarcus.net (avi@avimarcus.net)> wrote:

[brian at freeswitch.com]

Sure you're listing the correct profile? and blind-reg isn't turned on or something setup to not write it down?

On Mon, Nov 7, 2022 at 8:57 AM Aina Mestre <aina.mestre@airenetworks.es (aina.mestre@airenetworks.es)> wrote:

[aina.mestre at airenet...]

Good morning,

Yes, i’m sure i’m listing the correct profile. I had the parameter “accept-blind-reg” on false, but i change it to true and the result is the same. Which parameters can affect to this data?

This is my sofia profile configurations:

[root@fsproxysmart4 autoload_configs]# cat sofia.conf.xml
<!--
# Copyright 2013 Mathias WOLFF
# This file is part of pyfreebilling.
#
# pyfreebilling is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# pyfreebilling is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with pyfreebilling. If not, see <http://www.gnu.org/licenses/>
-->

<configuration name='sofia.conf' description='sofia endpoint'>

<global_settings>
<param name='log-level' value='9'/>
<param name='auto-restart' value='true'/>
<param name='debug-presence' value='0'/>
<param name='accept-blind-reg' value='true'/>
<param name='sip-trace' value='no'/>
<param name="tracelevel" value="error"/>
<param name='sip-capture' value='true'/>
<param name='auth-calls' value='true'/>
<param name='dtmf-type' value='rfc2833'/>
<param name='disable-hold' value='true'/>
<param name='rtp-autofix-timing' value='false'/>
<param name='disable-transfer' value='true'/>
<param name='sip-options-respond-503-on-busy' value='false'/>
<param name='capture-server' value='udp:graylog.---------:9060'/>
<param name="parse-all-invite-headers" value="true"/>
</global_settings>

<profiles>

<profile name='external'>

<domains>
<domain name="all" alias="true" parse="true"/>
</domains>

<settings>
<!--nuevo -->
<param name='dialplan' value='XML'/>
<param name="user-agent-string" value="FS Proxy Smart" />
<param name='username' value='pyfreebilling' />
<param name="ext-rtp-ip" value="auto" />
<param name="ext-sip-ip" value="auto" />
<param name="rtp-ip" value="auto" />
<param name="sip-ip" value="auto" />
<param name="sip-port" value="5060" />
<param name="nonce-ttl" value="60" />
<param name="rtp-timeout-sec" value="300" />
<param name="rtp-hold-timeout-sec" value="1800" />
<param name="rtp-timer-name" value="soft" />
<!-- nuevo -->
<param name='aggressive-nat-detection' value='False'/>
<!-- nuevo -->
<param name='NDLB-received-in-nat-reg-contact' value='False'/>
<!-- nuevo -->
<param name="parse-all-invite-headers" value="true"/>
<!-- nuevo -->
<param name='NDLB-broken-auth-hash' value='False'/>
<!-- nuevo -->
<param name='enable-timer' value='False'/>
<!-- nuevo -->
<param name='session-timeout' value='1800'/>
<!-- nuevo -->
<param name='apply-nat-acl' value='rfc1918'/>
<param name="inbound-codec-prefs" value="$${global_codec_prefs}" />
<param name="outbound-codec-prefs" value="$${outbound_codec_prefs}" />
<!-- nuevo -->
<param name='inbound-codec-negotiation' value='generous'/>
<!-- nuevo -->
<param name='disable-transcoding' value='True'/>
<param name="debug" value="0" />
<param name="dtmf-duration" value="100" />
<!-- <param name="sip-trace" value="no" /> -->
<param name="sip-capture" value="yes" />
<!-- <param name="rfc2833-pt" value="101" /> -->
<!-- nuevo -->
<param name='disable-register' value='False'/>
<!-- nuevo -->
<param name='challenge-realm' value='auto_from'/>
<!-- cambio valor -->
<param name='auth-calls' value='True'/>
<!-- nuevo -->
<param name='log-auth-failures' value='True'/>
<param name="context" value="public" />
<param name="apply-inbound-acl" value="domains" />
<param name="inbound-late-negotiation" value="true" />
<!-- nuevo -->
<param name="pass-rfc2833" value="true"/>
<!-- nuevo -->
<param name='pass-callee-id' value='true'/>
<param name="manage-presence" value="false" />
<!-- nuevo -->
<param name='timer-T1X64' value='1000'/>
<!-- nuevo -->
<param name="enable-3pcc" value="true"/>
<!--
<param name="local-network-acl" value="localnet.auto" />
<param name="inbound-codec-negotiation" value="greedy" />
<param name="inbound-zrtp-passthru" value="true" />
<param name="register" value="false"/>
-->

</settings>


<gateways>

<gateway name='NP000'>
<param name='username' value=''/>
<param name='from-user' value=''/>
<param name='realm' value=''/>
<param name='from-domain' value=''/>
<param name='password' value=''/>
<param name='caller-id-in-from' value='True'/>
<param name='extension' value=''/>
<!--<param name="extension" value="auto_to_user"/>-->
<param name='proxy' value='----------'/>
<param name='register' value='false'/>
<!-- <param name="reuse-connections" value="false"/> -->
<param name='expire-seconds' value='3600'/>
<param name='retry-seconds' value='60'/>
<param name='ping' value='60'/>
<param name='context' value='public'/>

<variables>
<variable name='gateway' value='2'/>
</variables>

</gateway>

</gateways>

</profile>

<profile name='Internal'>

<domains>
<domain name="all" alias="true" parse="true"/>
</domains>

<settings>
<param name="dialplan" value="XML" />
<!-- nuevo -->
<param name="user-agent-string" value="FS Proxy Smart" />
<!-- nuevo -->
<param name='username' value='pyfreebilling' />
<param name="ext-rtp-ip" value="auto" />
<param name="ext-sip-ip" value="auto" />
<!-- modificar
<param name="rtp-ip" value="109.167.76.242" />
<param name="sip-ip" value="109.167.76.242" />
-->
<param name='rtp-ip' value='auto'/>
<param name='sip-ip' value='auto'/>
<param name="sip-port" value="5080" />
<!-- nuevo -->
<param name='nonce-ttl' value='60'/>
<param name="rtp-timeout-sec" value="300" />
<param name="rtp-hold-timeout-sec" value="1800" />
<param name="rtp-timer-name" value="soft" />
<!-- nuevo -->
<param name='NDLB-received-in-nat-reg-contact' value='False'/>
<!-- nuevo -->
<param name="parse-all-invite-headers" value="true"/>
<!-- nuevo -->
<param name='NDLB-broken-auth-hash' value='False'/>
<!-- nuevo -->
<param name='enable-timer' value='False'/>
<!-- nuevo -->
<param name='session-timeout' value='1800'/>
<param name="apply-nat-acl" value="rfc1918" />
<param name="inbound-codec-prefs" value="PCMA,PCMU,G729" />
<param name="outbound-codec-prefs" value="PCMA,PCMU,G729" />
<param name="inbound-codec-negotiation" value="generous" />
<!-- nuevo -->
<param name='disable-transcoding' value='True'/>
<param name="debug" value="0" />
<param name="rfc2833-pt" value="101" />
<param name="dtmf-duration" value="100" />
<!-- nuevo -->
<param name='disable-register' value='False'/>
<!-- nuevo -->
<param name='challenge-realm' value='auto_from'/>
<param name="auth-calls" value="true" />
<param name="log-auth-failures" value="true" />
<!-- diferente -->
<param name="context" value="pyfreebill" />
<param name="apply-inbound-acl" value="domains" />
<param name="inbound-late-negotiation" value="true" />
<!-- nuevo -->
<param name="pass-rfc2833" value="true"/>
<!-- nuevo -->
<param name='pass-callee-id' value='true'/>
<param name="manage-presence" value="true" />
<!-- nuevo -->
<param name='timer-T1X64' value='1000'/>
<!-- nuevo -->
<param name="enable-3pcc" value="true"/>

<!-- Eliminamos
<param name="sip-trace" value="no" />
<param name="sip-capture" value="no" />
<param name="watchdog-enabled" value="no" />
<param name="watchdog-step-timeout" value="30000" />
<param name="watchdog-event-timeout" value="30000" />
<param name="forward-unsolicited-mwi-notify" value="false" />
<param name="context" value="pyfreebill" />
<param name="hold-music" value="$${hold_music}" />
<param name="local-network-acl" value="localnet.auto" />
<param name="record-path" value="$${recordings_dir}" />
<param name="record-template" value="${caller_id_number}.${target_domain}.${strftime(%Y-%m-%d-%H-%M-%S)}.wav" />
<param name="manage-presence" value="true" />
<param name="presence-hosts" value="$${domain},$${local_ip_v4}" />
<param name="presence-privacy" value="$${presence_privacy}" />
<param name="inbound-zrtp-passthru" value="true" />
<param name="inbound-reg-force-matching-username" value="true" />
<param name="auth-all-packets" value="false" />
<param name="force-register-domain" value="$${domain}" />
<param name="force-subscription-domain" value="$${domain}" />
<param name="force-register-db-domain" value="$${domain}" />
<param name="NDLB-force-rport" value="true"/>
<param name="all-reg-options-ping" value="true"/>
<param name="nat-options-ping" value="true"/>
-->
</settings>


</profile>

</profiles>
</configuration>

De: FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org> En nombre de Brian West
Enviado el: lunes, 7 de noviembre de 2022 16:35
Para: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org>
Asunto: Re: [Freeswitch-users] Sofia Status



Este e-mail fue originado fuera de Aire Networks. Ayúdanos a mantener segura nuestra empresa. Por favor, extrema las medidas de seguridad con los adjuntos, los enlaces o las solicitudes que pueda contener.


Sure you're listing the correct profile? and blind-reg isn't turned on or something setup to not write it down?


On Mon, Nov 7, 2022 at 8:57 AM Aina Mestre <aina.mestre@airenetworks.es (aina.mestre@airenetworks.es)> wrote: