VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
jwinius at umrk.to
Guest
|
 Posted: Mon Feb 18, 2008 10:08 am Post subject: [asterisk-users] SPA-3000 caller ID and KPN |
 |
|
Hi list,
Hopefully, some of our Dutch members can help with this one. I'm also
based in the Netherlands and am using a Sipura (Linksys) SPA-3000
(firmware v3.1.10(GWd)) as a PSTN to VoIP gateway for my Asterisk test
system. It works fine, except that the Called ID (CID) is not working.
I'm aware that KPN (our local telco) requires a separate subscription
to activate CID on POTS lines and I've confirmed that is working. Yet,
I've not been able to get the SPA-3000 to pas the CID on to Asterisk,
and I know of no relevant SPA-3000 settings for doing this other than:
* Regional
Miscellaneous
Caller ID Method: ETSI DTMF with PR
* PSTN Line
PSTN-To-VoIP Gateway Setup
PSTN CID For VoIP CID: yes
As some have suggested, I've also set the Regional / Miscellaneous /
Caller ID FSK Standard: to 'bell 202', but this seems like nonsense to
me as it should not make a difference once you've selected a DTMF CID
method.
I've also experimented with increasing the answer and ring-through
delays, but this makes no difference. I've been told that this is
because KPN always sends the CID on ahead of the rest of the call to
begin with.
Could it be that I'm missing something?
Thanks,
Jaap |
|
| Back to top |
|
 |
tjapml at cometonovasc...
Guest
|
| Posted: Mon Feb 18, 2008 2:23 pm Post subject: [asterisk-users] SPA-3000 caller ID and KPN |
|
|
Quoting Jaap Winius <jwinius at umrk.to>:
| Quote: | Hi list,
Hopefully, some of our Dutch members can help with this one. I'm also
based in the Netherlands and am using a Sipura (Linksys) SPA-3000
(firmware v3.1.10(GWd)) as a PSTN to VoIP gateway for my Asterisk test
system. It works fine, except that the Called ID (CID) is not working.
I'm aware that KPN (our local telco) requires a separate subscription
to activate CID on POTS lines and I've confirmed that is working. Yet,
I've not been able to get the SPA-3000 to pas the CID on to Asterisk,
and I know of no relevant SPA-3000 settings for doing this other than:
* Regional
Miscellaneous
Caller ID Method: ETSI DTMF with PR
* PSTN Line
PSTN-To-VoIP Gateway Setup
PSTN CID For VoIP CID: yes
As some have suggested, I've also set the Regional / Miscellaneous /
Caller ID FSK Standard: to 'bell 202', but this seems like nonsense to
me as it should not make a difference once you've selected a DTMF CID
method.
I've also experimented with increasing the answer and ring-through
delays, but this makes no difference. I've been told that this is
because KPN always sends the CID on ahead of the rest of the call to
begin with.
Could it be that I'm missing something?
Thanks,
Jaap
|
Hi Jaap,
I have a SPA3102 which is supposed to be similar. Make sure you leave
the PSTN --> Subscriber Information --> Display Name blank. Also, in
your sip.conf file, do not specify any "callerid=" value. This
probably isn't your issue, but I thought just in case...
Tim |
|
| Back to top |
|
|
jwinius at umrk.to
Guest
|
| Posted: Mon Feb 18, 2008 3:41 pm Post subject: [asterisk-users] SPA-3000 caller ID and KPN |
|
|
Quoting Tim Johnson <tjapml at cometonovascotia.ca>:
| Quote: | I have a SPA3102 which is supposed to be similar. Make sure you leave
the PSTN --> Subscriber Information --> Display Name blank. Also, in
your sip.conf file, do not specify any "callerid=" value. ...
|
It was worth a try, but unfortunately it makes no difference. Thanks
anyway, though.
Cheers,
Jaap |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
