Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[asterisk-users] Simultaneous Inbound and Outbound calls on


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users
View previous topic :: View next topic  
Author Message
novackster at gmail.com
Guest





PostPosted: Wed Feb 27, 2008 5:05 pm    Post subject: [asterisk-users] Simultaneous Inbound and Outbound calls on Reply with quote

James Finstrom wrote:
Quote:
This is called glare. What you should do is reverse your outbound hunt. If you dial zap/g0 simply use zap/G0. The capitol G makes the line go 5 4 3 2 1 instead of 1 2 3 4 5. You may still see glare but this usually reduces it.
James Finstrom
Rhino Equipment Corp.
http://www.rhinoequipment.com

Ground start trunks will also help. These used to be quite common with
two way PBX trunks, but as the telephony industry has moved away from
engineers knowledgeable about telephony, they are not as often used any
more. In addition the providers have tended to discourage their use
through pricing.
Best is to use both GS and outbound reverse from inbound hunt.

John Novack

Quote:
-----Original Message-----
From: Tim Nelson <tnelson at rockbochs.com>

Date: Wed, 27 Feb 2008 14:55:49
To:Asterisk Users Mailing List - Non-Commercial Discussion<asterisk-users at lists.digium.com>
Subject: [asterisk-users] Simultaneous Inbound and Outbound calls on analog
lines...


Hello! I've run into a problem where a user is making an outbound call at the same time that an inbound call is being made on the same analog line. It appears that as the zap channel is opened for the outbound call, it is simply answering the inbound call. Obviously, both parties involved in the calling get a bit confused. Previously, it happened only on an occasional basis. However, as this installation gets more and more use, we are finding it happens more often. How can this situation be prevented? Shouldn't zaptel see an incoming call and simply choose another trunk? We are running Asterisk 1.2.12.1 and Zaptel 1.2.22.1. Any ideas?!?

Tim Nelson
Systems/Network Support
Rockbochs Inc.


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users



--
Dog is my co-pilot
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services