VoIP Mailing List Archives

[jfinstrom at rhinoequi...]

This is called glare. What you should do is reverse your outbound hunt. If you dial zap/g0 simply use zap/G0. The capitol G makes the line go 5 4 3 2 1 instead of 1 2 3 4 5. You may still see glare but this usually reduces it.
James Finstrom
Rhino Equipment Corp.
http://www.rhinoequipment.com

-----Original Message-----
From: Tim Nelson <tnelson at rockbochs.com>

Date: Wed, 27 Feb 2008 14:55:49
To:Asterisk Users Mailing List - Non-Commercial Discussion<asterisk-users at lists.digium.com>
Subject: [asterisk-users] Simultaneous Inbound and Outbound calls on analog
lines...
Hello! I've run into a problem where a user is making an outbound call at the same time that an inbound call is being made on the same analog line. It appears that as the zap channel is opened for the outbound call, it is simply answering the inbound call. Obviously, both parties involved in the calling get a bit confused. Previously, it happened only on an occasional basis. However, as this installation gets more and more use, we are finding it happens more often. How can this situation be prevented? Shouldn't zaptel see an incoming call and simply choose another trunk? We are running Asterisk 1.2.12.1 and Zaptel 1.2.22.1. Any ideas?!?

Tim Nelson
Systems/Network Support
Rockbochs Inc.


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users