VoIP Mailing List Archives

[asif44pk at gmail.com]

hi,
i want to call PC2PC between to IAX client without authentication i
want to allow every user to use PC2PC no any password required. Please
let me know what i have need to do in IAX.conf or any other file to
allow any user to call Pc2Pc.

My IAX.conf
[guest]
type=user
context=default
callerid="Guest IAX User"

My extensions.conf
[default]
exten=>_.,1,Dial(IAX2/${EXTEN})
exten=>_y.,1,Dial(IAX2/${EXTEN})
exten=>_a.,1,Dial(IAX2/${EXTEN})

below is my Asterisk console logs which i see after making call.

Mar 28 03:25:43 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'aliadvcommnet' (from 203.99.57.80)
Mar 28 03:25:55 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'aliadvcommnet' (from 203.99.57.80)
Mar 28 03:25:55 NOTICE[2855]: chan_iax2.c:6910 socket_read: Rejected
connect attempt from 203.99.57.80, who was trying to reach
'jaffaradvcommnet@'
Mar 28 03:26:11 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'j' (from 203.99.57.80)
advcomm6*CLI> iax2 show channels
Channel Peer Username ID (Lo/Rem) Seq
(Tx/Rx) Lag Jitter JitBuf Format
(None) 203.99.57.80 (None) 00004/15232
00001/00001 00000ms -0001ms 0000ms unknow
(None) 203.99.57.80 jaffaradvc 00005/15233
00004/00004 00000ms -0001ms 0000ms unknow
(None) 203.99.57.80 (None) 00006/18423
00001/00001 00000ms -0001ms 0000ms unknow
3 active IAX channels
Mar 28 03:26:28 DEBUG[2855]: chan_iax2.c:4959 raw_hangup: Raw Hangup
203.99.57.80:53262, src=0, dst=15233
Mar 28 03:26:28 DEBUG[2855]: chan_iax2.c:4959 raw_hangup: Raw Hangup
203.99.57.80:53262, src=0, dst=15233
Mar 28 03:26:28 DEBUG[2855]: chan_iax2.c:4959 raw_hangup: Raw Hangup
203.99.57.80:53262, src=0, dst=15233
Mar 28 03:26:55 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'aliadvcommnet' (from 203.99.57.80)
Mar 28 03:27:11 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'jaffaradvcommnet' (from 203.99.57.80)

i am very thankful if some one help me in this regards,

i am getting Registration Refused error when i debug on console.
please tell me how can i registration every user without any username
and password and these user can make calls between each other.
i am very thankful if any body help me in this regards,

advcomm6*CLI>iax2 debug
Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00003ms SCall: 00002 DCall: 09398 [203.99.57.80:47641]
Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00003ms SCall: 09398 DCall: 00000 [203.99.57.80:47641]
USERNAME : aliadvcommnet
REFRESH : 60

Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00003ms SCall: 00002 DCall: 09398 [203.99.57.80:47641]
Tx-Frame Retry[001] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REGREJ
Timestamp: 00002ms SCall: 00002 DCall: 09398 [203.99.57.80:47641]
CAUSE : Registration Refused
CAUSE CODE : 29

regards,
Asif

[sanjay.rajdev at feath...]

Create a User and a Peer on both the machines for each other.

e.g IAX.conf on PCa
[pca2pcb]
type=peer
host=[IP OF pcb]
username=pca2pcb
serect=pca2pcb12345
qualify=yes
[pcb2pca]
type=user
context=default
auth=md5
secret=pcb2pca12345
deny=0.0.0.0/0.0.0.0
permit=[IP of pcb]
qualify=yes


ON PCb do the reverse in iax.conf
[pcb2pca]
type=peer
host=[IP OF pca]
username=pcb2pca
serect=pcb2pca12345
qualify=yes


[pca2pcb]
type=user
context=default
auth=md5
secret=pca2pcb12345
deny=0.0.0.0/0.0.0.0
permit=[IP of pca]
qualify=yes


NOW in Your extensions.conf you can use as
On PCa
exten=>_.,1,Dial(IAX2/pca2pcb/${EXTEN})
exten=>_y.,1,Dial(IAX2/pca2pcb/${EXTEN})
exten=>_a.,1,Dial(IAX2/pca2pcb/${EXTEN})


and on PCb
exten=>_.,1,Dial(IAX2/pcb2pca/${EXTEN})
exten=>_y.,1,Dial(IAX2/pcb2pca/${EXTEN})
exten=>_a.,1,Dial(IAX2/pcb2pca/${EXTEN})

Let me know if this works.

Regards,
Sanjay.



----- Original Message -----
From: "Mian M Asif" <asif44pk at gmail.com>
To: asterisk-users at lists.digium.com
Sent: Friday, March 28, 2008 8:04:08 PM (GMT+0530) Asia/Calcutta
Subject: [asterisk-users] how to register IAX user without password

hi,
i want to call PC2PC between to IAX client without authentication i
want to allow every user to use PC2PC no any password required. Please
let me know what i have need to do in IAX.conf or any other file to
allow any user to call Pc2Pc.

My IAX.conf
[guest]
type=user
context=default
callerid="Guest IAX User"

My extensions.conf
[default]
exten=>_.,1,Dial(IAX2/${EXTEN})
exten=>_y.,1,Dial(IAX2/${EXTEN})
exten=>_a.,1,Dial(IAX2/${EXTEN})

below is my Asterisk console logs which i see after making call.

Mar 28 03:25:43 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'aliadvcommnet' (from 203.99.57.80)
Mar 28 03:25:55 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'aliadvcommnet' (from 203.99.57.80)
Mar 28 03:25:55 NOTICE[2855]: chan_iax2.c:6910 socket_read: Rejected
connect attempt from 203.99.57.80, who was trying to reach
'jaffaradvcommnet@'
Mar 28 03:26:11 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'j' (from 203.99.57.80)
advcomm6*CLI> iax2 show channels
Channel Peer Username ID (Lo/Rem) Seq
(Tx/Rx) Lag Jitter JitBuf Format
(None) 203.99.57.80 (None) 00004/15232
00001/00001 00000ms -0001ms 0000ms unknow
(None) 203.99.57.80 jaffaradvc 00005/15233
00004/00004 00000ms -0001ms 0000ms unknow
(None) 203.99.57.80 (None) 00006/18423
00001/00001 00000ms -0001ms 0000ms unknow
3 active IAX channels
Mar 28 03:26:28 DEBUG[2855]: chan_iax2.c:4959 raw_hangup: Raw Hangup
203.99.57.80:53262, src=0, dst=15233
Mar 28 03:26:28 DEBUG[2855]: chan_iax2.c:4959 raw_hangup: Raw Hangup
203.99.57.80:53262, src=0, dst=15233
Mar 28 03:26:28 DEBUG[2855]: chan_iax2.c:4959 raw_hangup: Raw Hangup
203.99.57.80:53262, src=0, dst=15233
Mar 28 03:26:55 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'aliadvcommnet' (from 203.99.57.80)
Mar 28 03:27:11 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'jaffaradvcommnet' (from 203.99.57.80)

i am very thankful if some one help me in this regards,

i am getting Registration Refused error when i debug on console.
please tell me how can i registration every user without any username
and password and these user can make calls between each other.
i am very thankful if any body help me in this regards,

advcomm6*CLI>iax2 debug
Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00003ms SCall: 00002 DCall: 09398 [203.99.57.80:47641]
Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00003ms SCall: 09398 DCall: 00000 [203.99.57.80:47641]
USERNAME : aliadvcommnet
REFRESH : 60

Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00003ms SCall: 00002 DCall: 09398 [203.99.57.80:47641]
Tx-Frame Retry[001] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REGREJ
Timestamp: 00002ms SCall: 00002 DCall: 09398 [203.99.57.80:47641]
CAUSE : Registration Refused
CAUSE CODE : 29

regards,
Asif

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users