VoIP Mailing List Archives

[asif44pk at gmail.com]

hi,
i want to call PC2PC between to IAX client without authentication i
want to allow every user to use PC2PC no any password required. Please
let me know what i have need to do in IAX.conf or any other file to
allow any user to call Pc2Pc.

My IAX.conf
[guest]
type=user
context=default
callerid="Guest IAX User"

My extensions.conf
[default]
exten=>_.,1,Dial(IAX2/${EXTEN})
exten=>_y.,1,Dial(IAX2/${EXTEN})
exten=>_a.,1,Dial(IAX2/${EXTEN})

below is my Asterisk console logs which i see after making call.

Mar 28 03:25:43 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'aliadvcommnet' (from 203.99.57.80)
Mar 28 03:25:55 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'aliadvcommnet' (from 203.99.57.80)
Mar 28 03:25:55 NOTICE[2855]: chan_iax2.c:6910 socket_read: Rejected
connect attempt from 203.99.57.80, who was trying to reach
'jaffaradvcommnet@'
Mar 28 03:26:11 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'j' (from 203.99.57.80)
advcomm6*CLI> iax2 show channels
Channel Peer Username ID (Lo/Rem) Seq
(Tx/Rx) Lag Jitter JitBuf Format
(None) 203.99.57.80 (None) 00004/15232
00001/00001 00000ms -0001ms 0000ms unknow
(None) 203.99.57.80 jaffaradvc 00005/15233
00004/00004 00000ms -0001ms 0000ms unknow
(None) 203.99.57.80 (None) 00006/18423
00001/00001 00000ms -0001ms 0000ms unknow
3 active IAX channels
Mar 28 03:26:28 DEBUG[2855]: chan_iax2.c:4959 raw_hangup: Raw Hangup
203.99.57.80:53262, src=0, dst=15233
Mar 28 03:26:28 DEBUG[2855]: chan_iax2.c:4959 raw_hangup: Raw Hangup
203.99.57.80:53262, src=0, dst=15233
Mar 28 03:26:28 DEBUG[2855]: chan_iax2.c:4959 raw_hangup: Raw Hangup
203.99.57.80:53262, src=0, dst=15233
Mar 28 03:26:55 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'aliadvcommnet' (from 203.99.57.80)
Mar 28 03:27:11 NOTICE[2855]: chan_iax2.c:5144 register_verify: No
registration for peer 'jaffaradvcommnet' (from 203.99.57.80)

i am very thankful if some one help me in this regards,

regards,
Asif

[asif44pk at gmail.com]

i am getting Registration Refused error when i debug on console.
please tell me how can i registration every user without any username
and password and these user can make calls between each other.
i am very thankful if any body help me in this regards,

advcomm6*CLI>iax2 debug
Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00003ms SCall: 00002 DCall: 09398 [203.99.57.80:47641]
Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00003ms SCall: 09398 DCall: 00000 [203.99.57.80:47641]
USERNAME : aliadvcommnet
REFRESH : 60

Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00003ms SCall: 00002 DCall: 09398 [203.99.57.80:47641]
Tx-Frame Retry[001] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REGREJ
Timestamp: 00002ms SCall: 00002 DCall: 09398 [203.99.57.80:47641]
CAUSE : Registration Refused
CAUSE CODE : 29
On Fri, Mar 28, 2008 at 3:13 AM, Mian M Asif <asif44pk at gmail.com> wrote: