VoIP Mailing List Archives

[nhadie_monio at yahoo.com]

Hi All,

Can't explain what happened, last night i was setting the voicemail configuration, and it worked properly:

-- Executing [*97 at context-1000:3] VoiceMailMain("SIP/1000100-08219db0", "@VM-1000") in new stack
-- <SIP/1000100-08219db0> Playing 'vm-login' (language 'en')

i can hear the audio playing here. earlier i started playing with meetme, and since i don't have any zap cards, i chose to use ztdummy,

-- Executing [6000 at context-1000:1] MeetMe("SIP/1000100-08206da8", "6000") in new stack
== Parsing '/etc/asterisk/meetme.conf': Found
-- Created MeetMe conference 1023 for conference '6000'
-- <SIP/1000100-08206da8> Playing 'conf-getpin' (language 'en')
-- <SIP/1000100-08206da8> Playing 'conf-onlyperson' (language 'en')

from that message asterisk is playing conf-getpin, so i entered my conference pin number, even though i don't hear any audio, then it tried to play conf-onlyperson, still i dont hear anhything.

then i tried my voicemail retrieval

-- Executing [*97 at context-1000:3] VoiceMailMain("SIP/1000101-0822b6c0", "@VM-1000") in new stack
-- <SIP/1000101-0822b6c0> Playing 'vm-login' (language 'en')

same thing it's playing something but i don't hear anything.

i tried playing around with my codecs, i even downloaded the alaw core and extra sound files. what do you guys think happened? it was working before i enabled ztdummy.

i tested disabling the ztdummy then i can hear the audio at the voicemail but conference of course does not work now. i'm using zaptel-1.4.9.2, i tried downgrading to 1.4.8 down to 1.4.7. but still the same issue.

Regards,
Nhadie


---------------------------------
Never miss a thing. Make Yahoo your homepage.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080330/23bc434b/attachment.htm

[eric at fnords.org]

This is a reasonably common problem. ztdummy uses the Linux kernel Real
Time Clock (RTC) and something is wrong with it. The solution is to
recompile your kernel, you should search the mailing list archives.
Prepend "site:lists.digium.com" to your Google search to limit your
search to the mailinglist archives.

ronald ramos wrote:

[tzafrir.cohen at xorco...]

On Sun, Mar 30, 2008 at 12:22:43AM -0700, ronald ramos wrote:

[norman at myasd.com]

All too common and largely undocumented. I had this same problem.

Installing ztdummy changes Asterisk to use it for timing of playback,
apparently. Removing ztdummy "fixed" the problem. To get it all to
work, I had to upgrade to to at least kernel 2.6.23.11 (previous
versions are either missing options are just broken.) After doing
this, I recompiled ztdummy and it worked. Note that you need to
enable the various and random kernel flags to make this work,
generally dealing with the high-performance timer. I enabled:

HPET Timer Support
Enhanced Real Time Clock Support
HPET - High Precision Event Timer
HPET Control RTC IRQ
Allow mmap of HPET

I'm not sure if you can eliminate some of those, but this works for
me and is stable.

Norman Franke
ASD, Inc.
www.myasd.com
On Mar 30, 2008, at 1:00 PM, asterisk-users-request at lists.digium.com
wrote:

[tzafrir.cohen at xorco...]

On Sun, Mar 30, 2008 at 02:35:03PM -0400, Norman W. Franke wrote:

[nhadie_monio at yahoo.com]

Hi,

For now i just turned off acpi. and it works now.
just dont know what's the connection of that though


i will try to do the things you guys suggested also
when i get the chance, thanks for you help!

regards,
nhadie
--- Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:

[david at linuxcrazy.com]

ronald ramos wrote: