Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[asterisk-users] Asterisk with lumenvox


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users
View previous topic :: View next topic  
Author Message
josueconti at gmail.com
Guest





PostPosted: Fri Apr 04, 2008 1:45 pm    Post subject: [asterisk-users] Asterisk with lumenvox Reply with quote

Hello everyone.
I wish I could continue with the approval of the engine Lumenvox, for
voice recognition, but not a development of acceptable engine,
Please could help me in achieving test?
As I said earlier we have a project that will involve a very large
number of licenses for Voice recognition, but I would count on help
from Lumenvox, for this case.
Could you help me?

Best Regards

Josu?

2008/3/19 Josu? Conti <josueconti at gmail.com>:
Quote:
Hello everyone, Rodrigo and Philipp Hello, I would like to know how to
properly configure the engine Lumenvox no asterisk, I am trying to
dial by vox actually like that the user should dial for receipt of my
business, is attended by an IVR system with voice recognition that
allows the user to say who would like to talk and the asterisk foward
the call.
Set up the asterisk below, but the system recognizes the voice, but
does not guide the call, running immediately after a hangup, what is
wrong with my settings? I can not very material support on the issue,
could help me?
I am not really achieving great results in my tests with engine Lumenvox:
I am trying to test a simple scheduling dialing by voice, where the
system identify the user by name and system called in your phone
number, but I am not able, could help me?
If I did not say any word, the system is static, but if I say any
Word, even different words grammar.gram (ura.gram) of the system
Performs the following priorities file extensions.conf, please, can
You help me?

Best Regards

Josu?

Our programming files are configured this way:
Ipbx: / etc / asterisk # vim lumenvox.conf
; LumenVox configuration file
[General]
Servers = 127.0.0.1; Speech Engine Servers to use.
Save_sound_files = no; Set to yes to save sound files for use with Speech Tuner
[Grammars]
ura = / etc / asterisk / grammars / ura.gram
[Default]
Vad_snr_sensitivity = 50
Vad_volume_sensitivity = 50
Vad_eos_delay = 1250
Vad_wind_back = 750
End_of_speech_timeout = 15000
Use_oov_filter = no
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;
Ipbx: / etc / asterisk # vim extensions.conf
[General]

[Globals]

DYNAMIC_FEATURES => # pickupexten hangup atxfer # # blidxfer

[Default]
Length => 2000.1, Playback (Ura / instit / instit_casa)
Length => 1515.1, Playback (Ura / parabens)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Pilot URA
Length => 6969.1, GotoIfTime (07:50-18:05 | mon-fri |*|*? ura, s, 1)
Length => 6969.2, GotoIfTime (18:06-23:59 | mon-fri |*|*? ura, s, 1)
Length => 6969.3, GotoIfTime (00:00-07:49 | mon-fri |*|*? ura, s, 1)
Length => 6969.4, GotoIfTime (* | sat-sun |*|*? ura, s, 1)

; IVR URA

;============================================
[URA]
;============================================
Length => s, 1, Answer ()
Length => s, n, Wait (3)
Length => s, n, NoOp (entry Ura)
Length => s, n, Set (TRIES = 0)
; Length => s, n, ResponseTimeout (10)
Length => s, n, BackGround (Ura /abertura)
Length => s, n, Playback (beep)
; Length => s, n, BackGround (Ura / abertura1)
Length => s, n, Goto (lumenvox-test, s, 1)
[Lumenvox-test]
Length => s, 1, Answer
Length => s, n, Wait (1)
Length => s, n, SpeechCreate ()
Length => s, n, SpeechActivateGrammar (Ura)
Length => s, n, SpeechStart ()
Length => s, n, SpeechBackground (liggol / abertura)
Length => s, n, SpeechDeactivateGrammar (Ura)
Length => s, n, Goto (institutional, s, 1 - $ SPEECH_TEXT (0) ())
[Institutional]
Length => s, 1, Playback (Ura / instit / instit)
Length => s, 2, congestion (3)
Length => s, 3, hangup

ipbx: / etc / asterisk / grammars # vim ura.gram
# - Grammar: ura.gram


# ABNF 1.0;
Language es-CO;
Voice mode;
Tag-format <lumenvox/1.0>;
Root $ URA;
$ Continent = ((Josue | Conti) []): "2000";
$ Palms = () 1515 ";

$ Ura = ($ conti | $ palms) = $ $ $ ();

2008/3/19, Rodrigo Gonzalez <rjgonzale at gmail.com>:


Quote:
Josu? Conti escribi?:
Quote:
Hello all, how are you?
I would like to know from someone uses or has used the engines of
LumenVox for integration with the asterisk for voice recognition.

Best Regards

Josu?

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users


I've configured for a customer. What do you need to know?


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users


Back to top
bwentdg at pipeline.com
Guest





PostPosted: Sat Apr 05, 2008 4:23 am    Post subject: [asterisk-users] Asterisk with lumenvox Reply with quote

I had posted earlier asking about folks real world experiences with
with Lumenvox, and the thread 'strangely' disappeared after some
bloke from down under justed sodded himself over my straight simple
questions.
Hmmmmm- makes you wonder.

Josu? Conti wrote:
Quote:
Hello everyone.
I wish I could continue with the approval of the engine Lumenvox, for
voice recognition, but not a development of acceptable engine,
Please could help me in achieving test?
As I said earlier we have a project that will involve a very large
number of licenses for Voice recognition, but I would count on help
from Lumenvox, for this case.
Could you help me?

Best Regards

Josu?

2008/3/19 Josu? Conti <josueconti at gmail.com>:

Quote:
Hello everyone, Rodrigo and Philipp Hello, I would like to know how to
properly configure the engine Lumenvox no asterisk, I am trying to
dial by vox actually like that the user should dial for receipt of my
business, is attended by an IVR system with voice recognition that
allows the user to say who would like to talk and the asterisk foward
the call.
Set up the asterisk below, but the system recognizes the voice, but
does not guide the call, running immediately after a hangup, what is
wrong with my settings? I can not very material support on the issue,
could help me?
I am not really achieving great results in my tests with engine Lumenvox:
I am trying to test a simple scheduling dialing by voice, where the
system identify the user by name and system called in your phone
number, but I am not able, could help me?
If I did not say any word, the system is static, but if I say any
Word, even different words grammar.gram (ura.gram) of the system
Performs the following priorities file extensions.conf, please, can
You help me?

Best Regards

Josu?

Our programming files are configured this way:
Ipbx: / etc / asterisk # vim lumenvox.conf
; LumenVox configuration file
[General]
Servers = 127.0.0.1; Speech Engine Servers to use.
Save_sound_files = no; Set to yes to save sound files for use with Speech Tuner
[Grammars]
ura = / etc / asterisk / grammars / ura.gram
[Default]
Vad_snr_sensitivity = 50
Vad_volume_sensitivity = 50
Vad_eos_delay = 1250
Vad_wind_back = 750
End_of_speech_timeout = 15000
Use_oov_filter = no
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;
Ipbx: / etc / asterisk # vim extensions.conf
[General]

[Globals]

DYNAMIC_FEATURES => # pickupexten hangup atxfer # # blidxfer

[Default]
Length => 2000.1, Playback (Ura / instit / instit_casa)
Length => 1515.1, Playback (Ura / parabens)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Pilot URA
Length => 6969.1, GotoIfTime (07:50-18:05 | mon-fri |*|*? ura, s, 1)
Length => 6969.2, GotoIfTime (18:06-23:59 | mon-fri |*|*? ura, s, 1)
Length => 6969.3, GotoIfTime (00:00-07:49 | mon-fri |*|*? ura, s, 1)
Length => 6969.4, GotoIfTime (* | sat-sun |*|*? ura, s, 1)

; IVR URA

;============================================
[URA]
;============================================
Length => s, 1, Answer ()
Length => s, n, Wait (3)
Length => s, n, NoOp (entry Ura)
Length => s, n, Set (TRIES = 0)
; Length => s, n, ResponseTimeout (10)
Length => s, n, BackGround (Ura /abertura)
Length => s, n, Playback (beep)
; Length => s, n, BackGround (Ura / abertura1)
Length => s, n, Goto (lumenvox-test, s, 1)
[Lumenvox-test]
Length => s, 1, Answer
Length => s, n, Wait (1)
Length => s, n, SpeechCreate ()
Length => s, n, SpeechActivateGrammar (Ura)
Length => s, n, SpeechStart ()
Length => s, n, SpeechBackground (liggol / abertura)
Length => s, n, SpeechDeactivateGrammar (Ura)
Length => s, n, Goto (institutional, s, 1 - $ SPEECH_TEXT (0) ())
[Institutional]
Length => s, 1, Playback (Ura / instit / instit)
Length => s, 2, congestion (3)
Length => s, 3, hangup

ipbx: / etc / asterisk / grammars # vim ura.gram
# - Grammar: ura.gram


# ABNF 1.0;
Language es-CO;
Voice mode;
Tag-format <lumenvox/1.0>;
Root $ URA;
$ Continent = ((Josue | Conti) []): "2000";
$ Palms = () 1515 ";

$ Ura = ($ conti | $ palms) = $ $ $ ();

2008/3/19, Rodrigo Gonzalez <rjgonzale at gmail.com>:



Quote:
Josu? Conti escribi?:

Quote:
Hello all, how are you?
I would like to know from someone uses or has used the engines of
LumenVox for integration with the asterisk for voice recognition.

Best Regards

Josu?

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users


I've configured for a customer. What do you need to know?


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users





_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users


Back to top
josueconti at gmail.com
Guest





PostPosted: Sat Apr 05, 2008 11:54 pm    Post subject: [asterisk-users] Asterisk with lumenvox Reply with quote

Hi Al, how are you?
You use Lumenvox? What we think of the performance of the engine?
Thank you for your attention

Regards!

Josu?

2008/4/5, Al Baker <bwentdg at pipeline.com>:
Quote:
I had posted earlier asking about folks real world experiences with
with Lumenvox, and the thread 'strangely' disappeared after some
bloke from down under justed sodded himself over my straight simple
questions.
Hmmmmm- makes you wonder.

Josu? Conti wrote:
Quote:
Hello everyone.
I wish I could continue with the approval of the engine Lumenvox, for
voice recognition, but not a development of acceptable engine,
Please could help me in achieving test?
As I said earlier we have a project that will involve a very large
number of licenses for Voice recognition, but I would count on help
from Lumenvox, for this case.
Could you help me?

Best Regards

Josu?

2008/3/19 Josu? Conti <josueconti at gmail.com>:

Quote:
Hello everyone, Rodrigo and Philipp Hello, I would like to know how to
properly configure the engine Lumenvox no asterisk, I am trying to
dial by vox actually like that the user should dial for receipt of my
business, is attended by an IVR system with voice recognition that
allows the user to say who would like to talk and the asterisk foward
the call.
Set up the asterisk below, but the system recognizes the voice, but
does not guide the call, running immediately after a hangup, what is
wrong with my settings? I can not very material support on the issue,
could help me?
I am not really achieving great results in my tests with engine Lumenvox:
I am trying to test a simple scheduling dialing by voice, where the
system identify the user by name and system called in your phone
number, but I am not able, could help me?
If I did not say any word, the system is static, but if I say any
Word, even different words grammar.gram (ura.gram) of the system
Performs the following priorities file extensions.conf, please, can
You help me?

Best Regards

Josu?

Our programming files are configured this way:
Ipbx: / etc / asterisk # vim lumenvox.conf
; LumenVox configuration file
[General]
Servers = 127.0.0.1; Speech Engine Servers to use.
Save_sound_files = no; Set to yes to save sound files for use with Speech Tuner
[Grammars]
ura = / etc / asterisk / grammars / ura.gram
[Default]
Vad_snr_sensitivity = 50
Vad_volume_sensitivity = 50
Vad_eos_delay = 1250
Vad_wind_back = 750
End_of_speech_timeout = 15000
Use_oov_filter = no
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;
Ipbx: / etc / asterisk # vim extensions.conf
[General]

[Globals]

DYNAMIC_FEATURES => # pickupexten hangup atxfer # # blidxfer

[Default]
Length => 2000.1, Playback (Ura / instit / instit_casa)
Length => 1515.1, Playback (Ura / parabens)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Pilot URA
Length => 6969.1, GotoIfTime (07:50-18:05 | mon-fri |*|*? ura, s, 1)
Length => 6969.2, GotoIfTime (18:06-23:59 | mon-fri |*|*? ura, s, 1)
Length => 6969.3, GotoIfTime (00:00-07:49 | mon-fri |*|*? ura, s, 1)
Length => 6969.4, GotoIfTime (* | sat-sun |*|*? ura, s, 1)

; IVR URA

;============================================
[URA]
;============================================
Length => s, 1, Answer ()
Length => s, n, Wait (3)
Length => s, n, NoOp (entry Ura)
Length => s, n, Set (TRIES = 0)
; Length => s, n, ResponseTimeout (10)
Length => s, n, BackGround (Ura /abertura)
Length => s, n, Playback (beep)
; Length => s, n, BackGround (Ura / abertura1)
Length => s, n, Goto (lumenvox-test, s, 1)
[Lumenvox-test]
Length => s, 1, Answer
Length => s, n, Wait (1)
Length => s, n, SpeechCreate ()
Length => s, n, SpeechActivateGrammar (Ura)
Length => s, n, SpeechStart ()
Length => s, n, SpeechBackground (liggol / abertura)
Length => s, n, SpeechDeactivateGrammar (Ura)
Length => s, n, Goto (institutional, s, 1 - $ SPEECH_TEXT (0) ())
[Institutional]
Length => s, 1, Playback (Ura / instit / instit)
Length => s, 2, congestion (3)
Length => s, 3, hangup

ipbx: / etc / asterisk / grammars # vim ura.gram
# - Grammar: ura.gram


# ABNF 1.0;
Language es-CO;
Voice mode;
Tag-format <lumenvox/1.0>;
Root $ URA;
$ Continent = ((Josue | Conti) []): "2000";
$ Palms = () 1515 ";

$ Ura = ($ conti | $ palms) = $ $ $ ();

2008/3/19, Rodrigo Gonzalez <rjgonzale at gmail.com>:



Quote:
Josu? Conti escribi?:

Quote:
Hello all, how are you?
I would like to know from someone uses or has used the engines of
LumenVox for integration with the asterisk for voice recognition.

Best Regards

Josu?

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users


I've configured for a customer. What do you need to know?


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users





_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users




_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Back to top
bwentdg at pipeline.com
Guest





PostPosted: Sun Apr 06, 2008 4:53 am    Post subject: [asterisk-users] Asterisk with lumenvox Reply with quote

I don't use Lumenvox, yet.
I have a large client who has expressed interest in having "something
like it" deployed.
For such a "revolutionary" product there is very little chatter in the
list about it.
I really had hoped to hear from a bunch of people who had deployed it
and how it worked out for them.

Josu? Conti wrote:
Quote:
Hi Al, how are you?
You use Lumenvox? What we think of the performance of the engine?
Thank you for your attention

Regards!

Josu?

2008/4/5, Al Baker <bwentdg at pipeline.com>:

Quote:
I had posted earlier asking about folks real world experiences with
with Lumenvox, and the thread 'strangely' disappeared after some
bloke from down under justed sodded himself over my straight simple
questions.
Hmmmmm- makes you wonder.

Josu? Conti wrote:

Quote:
Hello everyone.
I wish I could continue with the approval of the engine Lumenvox, for
voice recognition, but not a development of acceptable engine,
Please could help me in achieving test?
As I said earlier we have a project that will involve a very large
number of licenses for Voice recognition, but I would count on help
from Lumenvox, for this case.
Could you help me?

Best Regards

Josu?

2008/3/19 Josu? Conti <josueconti at gmail.com>:


Quote:
Hello everyone, Rodrigo and Philipp Hello, I would like to know how to
properly configure the engine Lumenvox no asterisk, I am trying to
dial by vox actually like that the user should dial for receipt of my
business, is attended by an IVR system with voice recognition that
allows the user to say who would like to talk and the asterisk foward
the call.
Set up the asterisk below, but the system recognizes the voice, but
does not guide the call, running immediately after a hangup, what is
wrong with my settings? I can not very material support on the issue,
could help me?
I am not really achieving great results in my tests with engine Lumenvox:
I am trying to test a simple scheduling dialing by voice, where the
system identify the user by name and system called in your phone
number, but I am not able, could help me?
If I did not say any word, the system is static, but if I say any
Word, even different words grammar.gram (ura.gram) of the system
Performs the following priorities file extensions.conf, please, can
You help me?

Best Regards

Josu?

Our programming files are configured this way:
Ipbx: / etc / asterisk # vim lumenvox.conf
; LumenVox configuration file
[General]
Servers = 127.0.0.1; Speech Engine Servers to use.
Save_sound_files = no; Set to yes to save sound files for use with Speech Tuner
[Grammars]
ura = / etc / asterisk / grammars / ura.gram
[Default]
Vad_snr_sensitivity = 50
Vad_volume_sensitivity = 50
Vad_eos_delay = 1250
Vad_wind_back = 750
End_of_speech_timeout = 15000
Use_oov_filter = no
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;
Ipbx: / etc / asterisk # vim extensions.conf
[General]

[Globals]

DYNAMIC_FEATURES => # pickupexten hangup atxfer # # blidxfer

[Default]
Length => 2000.1, Playback (Ura / instit / instit_casa)
Length => 1515.1, Playback (Ura / parabens)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Pilot URA
Length => 6969.1, GotoIfTime (07:50-18:05 | mon-fri |*|*? ura, s, 1)
Length => 6969.2, GotoIfTime (18:06-23:59 | mon-fri |*|*? ura, s, 1)
Length => 6969.3, GotoIfTime (00:00-07:49 | mon-fri |*|*? ura, s, 1)
Length => 6969.4, GotoIfTime (* | sat-sun |*|*? ura, s, 1)

; IVR URA

;============================================
[URA]
;============================================
Length => s, 1, Answer ()
Length => s, n, Wait (3)
Length => s, n, NoOp (entry Ura)
Length => s, n, Set (TRIES = 0)
; Length => s, n, ResponseTimeout (10)
Length => s, n, BackGround (Ura /abertura)
Length => s, n, Playback (beep)
; Length => s, n, BackGround (Ura / abertura1)
Length => s, n, Goto (lumenvox-test, s, 1)
[Lumenvox-test]
Length => s, 1, Answer
Length => s, n, Wait (1)
Length => s, n, SpeechCreate ()
Length => s, n, SpeechActivateGrammar (Ura)
Length => s, n, SpeechStart ()
Length => s, n, SpeechBackground (liggol / abertura)
Length => s, n, SpeechDeactivateGrammar (Ura)
Length => s, n, Goto (institutional, s, 1 - $ SPEECH_TEXT (0) ())
[Institutional]
Length => s, 1, Playback (Ura / instit / instit)
Length => s, 2, congestion (3)
Length => s, 3, hangup

ipbx: / etc / asterisk / grammars # vim ura.gram
# - Grammar: ura.gram


# ABNF 1.0;
Language es-CO;
Voice mode;
Tag-format <lumenvox/1.0>;
Root $ URA;
$ Continent = ((Josue | Conti) []): "2000";
$ Palms = () 1515 ";

$ Ura = ($ conti | $ palms) = $ $ $ ();

2008/3/19, Rodrigo Gonzalez <rjgonzale at gmail.com>:




Quote:
Josu? Conti escribi?:


Quote:
Hello all, how are you?
I would like to know from someone uses or has used the engines of
LumenVox for integration with the asterisk for voice recognition.

Best Regards

Josu?

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users


I've configured for a customer. What do you need to know?


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users





_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users




_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users



_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users


Back to top
josueconti at gmail.com
Guest





PostPosted: Sun Apr 06, 2008 8:26 am    Post subject: [asterisk-users] Asterisk with lumenvox Reply with quote

OK! I'm also in the process of testing the engine Lumenvox, could not
yet approve a solution to the Portuguese language(testing with Spanish
Colombian), but will be testing this week.
Thank you for your attention, when achieve test I return follow up,ok?
Best Regards

Josu?

2008/4/6 Al Baker <bwentdg at pipeline.com>:
Quote:
I don't use Lumenvox, yet.
I have a large client who has expressed interest in having "something
like it" deployed.
For such a "revolutionary" product there is very little chatter in the
list about it.
I really had hoped to hear from a bunch of people who had deployed it
and how it worked out for them.



Josu? Conti wrote:
Quote:
Hi Al, how are you?
You use Lumenvox? What we think of the performance of the engine?
Thank you for your attention

Regards!

Josu?

2008/4/5, Al Baker <bwentdg at pipeline.com>:

Quote:
I had posted earlier asking about folks real world experiences with
with Lumenvox, and the thread 'strangely' disappeared after some
bloke from down under justed sodded himself over my straight simple
questions.
Hmmmmm- makes you wonder.

Josu? Conti wrote:

Quote:
Hello everyone.
I wish I could continue with the approval of the engine Lumenvox, for
voice recognition, but not a development of acceptable engine,
Please could help me in achieving test?
As I said earlier we have a project that will involve a very large
number of licenses for Voice recognition, but I would count on help
from Lumenvox, for this case.
Could you help me?

Best Regards

Josu?

2008/3/19 Josu? Conti <josueconti at gmail.com>:


Quote:
Hello everyone, Rodrigo and Philipp Hello, I would like to know how to
properly configure the engine Lumenvox no asterisk, I am trying to
dial by vox actually like that the user should dial for receipt of my
business, is attended by an IVR system with voice recognition that
allows the user to say who would like to talk and the asterisk foward
the call.
Set up the asterisk below, but the system recognizes the voice, but
does not guide the call, running immediately after a hangup, what is
wrong with my settings? I can not very material support on the issue,
could help me?
I am not really achieving great results in my tests with engine Lumenvox:
I am trying to test a simple scheduling dialing by voice, where the
system identify the user by name and system called in your phone
number, but I am not able, could help me?
If I did not say any word, the system is static, but if I say any
Word, even different words grammar.gram (ura.gram) of the system
Performs the following priorities file extensions.conf, please, can
You help me?

Best Regards

Josu?

Our programming files are configured this way:
Ipbx: / etc / asterisk # vim lumenvox.conf
; LumenVox configuration file
[General]
Servers = 127.0.0.1; Speech Engine Servers to use.
Save_sound_files = no; Set to yes to save sound files for use with Speech Tuner
[Grammars]
ura = / etc / asterisk / grammars / ura.gram
[Default]
Vad_snr_sensitivity = 50
Vad_volume_sensitivity = 50
Vad_eos_delay = 1250
Vad_wind_back = 750
End_of_speech_timeout = 15000
Use_oov_filter = no
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;
Ipbx: / etc / asterisk # vim extensions.conf
[General]

[Globals]

DYNAMIC_FEATURES => # pickupexten hangup atxfer # # blidxfer

[Default]
Length => 2000.1, Playback (Ura / instit / instit_casa)
Length => 1515.1, Playback (Ura / parabens)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Pilot URA
Length => 6969.1, GotoIfTime (07:50-18:05 | mon-fri |*|*? ura, s, 1)
Length => 6969.2, GotoIfTime (18:06-23:59 | mon-fri |*|*? ura, s, 1)
Length => 6969.3, GotoIfTime (00:00-07:49 | mon-fri |*|*? ura, s, 1)
Length => 6969.4, GotoIfTime (* | sat-sun |*|*? ura, s, 1)

; IVR URA

;============================================
[URA]
;============================================
Length => s, 1, Answer ()
Length => s, n, Wait (3)
Length => s, n, NoOp (entry Ura)
Length => s, n, Set (TRIES = 0)
; Length => s, n, ResponseTimeout (10)
Length => s, n, BackGround (Ura /abertura)
Length => s, n, Playback (beep)
; Length => s, n, BackGround (Ura / abertura1)
Length => s, n, Goto (lumenvox-test, s, 1)
[Lumenvox-test]
Length => s, 1, Answer
Length => s, n, Wait (1)
Length => s, n, SpeechCreate ()
Length => s, n, SpeechActivateGrammar (Ura)
Length => s, n, SpeechStart ()
Length => s, n, SpeechBackground (liggol / abertura)
Length => s, n, SpeechDeactivateGrammar (Ura)
Length => s, n, Goto (institutional, s, 1 - $ SPEECH_TEXT (0) ())
[Institutional]
Length => s, 1, Playback (Ura / instit / instit)
Length => s, 2, congestion (3)
Length => s, 3, hangup

ipbx: / etc / asterisk / grammars # vim ura.gram
# - Grammar: ura.gram


# ABNF 1.0;
Language es-CO;
Voice mode;
Tag-format <lumenvox/1.0>;
Root $ URA;
$ Continent = ((Josue | Conti) []): "2000";
$ Palms = () 1515 ";

$ Ura = ($ conti | $ palms) = $ $ $ ();

2008/3/19, Rodrigo Gonzalez <rjgonzale at gmail.com>:




Quote:
Josu? Conti escribi?:


Quote:
Hello all, how are you?
I would like to know from someone uses or has used the engines of
LumenVox for integration with the asterisk for voice recognition.

Best Regards

Josu?

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users


I've configured for a customer. What do you need to know?


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users





_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users




_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users



_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users




_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services