VoIP Mailing List Archives

[Guest]

I had this problem before...the following appeared in a previous post...
For some reasons, the "*" and "1" must be pressed pretty quickly together on the Polycom phone before it can be transmitted successfully to Asterisk.
Does anyone know if that can be tuned?
Sure... go to features.conf, and change the value of the featuredigittimeout option.
Hope this helps.

________________________________________
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Klaverstyn, David C
Sent: Monday, 7 April 2008 3:28 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] One Touch Recording

Hi All,

For some reason One Touch Recoding does not work over ZAP but it does work when I call another extension.? Both Dial commands have the W option for the calling party to enable recording.

Does anyone know why it works internally but not over ZAP.? I have a TE110P card on an E1 connection.

[Guest]

Thanks for that. I have the timeout set to 3000 ms and I have been pressing the *1 within 500 ms so I don't think it is related to that. As I can do it over SIP but not ZAP does not make much sense to me.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Lee, John (Sydney)
Sent: Monday, 7 April 2008 3:38 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] One Touch Recording

I had this problem before...the following appeared in a previous post...
For some reasons, the "*" and "1" must be pressed pretty quickly together on the Polycom phone before it can be transmitted successfully to Asterisk.
Does anyone know if that can be tuned?
Sure... go to features.conf, and change the value of the featuredigittimeout option.
Hope this helps.

________________________________________
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Klaverstyn, David C
Sent: Monday, 7 April 2008 3:28 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] One Touch Recording

Hi All,

For some reason One Touch Recoding does not work over ZAP but it does work when I call another extension.? Both Dial commands have the W option for the calling party to enable recording.

Does anyone know why it works internally but not over ZAP.? I have a TE110P card on an E1 connection.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[stotaro at totarotechn...]

On Mon, Apr 7, 2008 at 1:49 AM, Klaverstyn, David C
<David.Klaverstyn at intergraph.com> wrote: