VoIP Mailing List Archives

[christian08 at runbox.com]

Hello all,
I need some help with my Cisco 7960 enabling TFTP. Does anyone know what numbers to press in the menu? Or can I enable this through telnet?
Many thanks,
Christian

[stotaro at totarotechn...]

You probably have to unlock it first. Google or voip-info.org is your friend.

On Sun, Apr 6, 2008 at 5:02 PM, Christian <christian08 at runbox.com> wrote:

[christian08 at runbox.com]

Hello,
I know how to unlock the phone and what the password is.
I am asking this kind of question because i am visually impaired and cannot see the screen.
many thanks,
Christian
On 2008-04-06 at 17:05 Steve Totaro wrote:

[stotaro at totarotechn...]

In that case, I guess I would ask somone with better sight to help me
out, uless they have braille on the buttons.

Thanks,
Steve Totaro

On Sun, Apr 6, 2008 at 5:09 PM, Christian <christian08 at runbox.com> wrote:

[Guest]

That's what he's doing, he's asking someone with better sight to help
him out and tell him what buttons to press! I've dialed in the dark
enough times to know you don't need braille on the buttons to find the
3x4 array and use it properly without eyes.

Sorry, Steve, but I had a twinge of 'what if *I* was blind' when you
said that.

Moj

Steve Totaro wrote:

[stotaro at totarotechn...]

Mojo thanks for the perspective check, hope this is of help:

Reset the 7940 and 7960 IP Phones to the Factory Default
In order to perform a factory reset of a phone if the password is set,
complete these steps:

* Unplug the power cable from the phone, and then plug in the cable again.

* The phone begins its power up cycle.

* Immediately press and hold # while the Headset, Mute, and Speaker buttons
flash in sequence.

* Release # after the Speaker button is no longer lit.
* The Headset, Mute, and Speaker buttons flash in sequence in order to
indicate that the phone waits for you to enter the key sequence for the
reset.

* Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker
buttons begin to flash.

* If you repeat a key within the sequence, for example, if you press
1223456789*0#, the sequence is still accepted and the phone resets.
* If you do not complete this key sequence or do not press any keys, after
60 seconds, the Headset, Mute, and Speaker buttons no longer flash, and the
phone continues with its normal startup process. The phone does not reset.
* If you enter an invalid key sequence, the buttons no longer flash, and the
phone continues with its normal startup process. The phone does not reset.
* If you enter this key sequence correctly, the phone displays this prompt:
* Keep network cfg? 1 = yes 2 = no

* In order to maintain the current network configuration settings for the
phone when the phone resets, press 1. In order to reset the network
configuration settings when the phone resets, press 2.

* If you press another key or do not respond to this prompt within 60
seconds, the phone continues with its normal startup process and does not
reset. Otherwise, the phone goes through the factory reset process.

Thanks,
Steve Totaro

On Tue, Apr 8, 2008 at 3:37 PM, Mojo with Horan & Company, LLC
<mojo at horanappraisals.com> wrote: