VoIP Mailing List Archives

list at virtutel.ca · Guest

Wow that was easy. Thanks! My wrong syntax must have worked in 1.2 by pure
chance, or I must have erased the brackets by mistake while I was tweaking
the config files following the upgrade.

Thanks alot, you saved me alot of time and grief.

Regards,

Mike
_____

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jeremy Mann
Sent: Friday, April 18, 2008 12:39
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Question on groups

Try GROUP()=internal-

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mike
Sent: Friday, April 18, 2008 11:30 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [asterisk-users] Question on groups

I believe I am close to fixing my problems with my 1.2 to 1.4.19 upgrade. I
have one question: to limit my customers to the number of channels they have
paid for, I use the GROUP feature. I also regularly check in the CLI what`s
going on using "group show channels".

Basically, my system is designed so that an external call is set to group
$ACCOUNTCODE and an internal call set to group internal-$ACCOUNTCODE.

i.e.: 5551234567 for an external call and internal-5551234567 for an
internal call. Internal calls are not limited, but I still keep track of
them.

When I used "group show channels" in the 1.2 CLI, I`d get a healthy mix of
5551234567 and internal-5551234567. Ever since moving to 1.4.19, I only see
the external calls when using "group show channels". Nothing about the
internal calls.

The relevant line is in my extensions.conf is :

exten => _X!.,n,Set(GROUP=internal-${CDR(accountcode)})

And the CLI shows :

-- Executing [711 at generic-extensions-db:2] Set("SIP/00041234432-1-b7d4b908",
"GROUP=internal-5149070849") in new stack

Which seems right. But it never shows up in the CLI when checking for group
channels.

Any clue? Did something major change between 1.2 and 1.4?

Mike

_____

This e-mail, facsimile, or letter and any files or attachments transmitted
with it contains information that is confidential and privileged. This
information is intended only for the use of the individual(s) and
entity(ies) to whom it is addressed. If you are the intended recipient,
further disclosures are prohibited without proper authorization. If you are
not the intended recipient, any disclosure, copying, printing, or use of
this information is strictly prohibited and possibly a violation of federal
or state law and regulations. If you have received this information in
error, please notify Texas Health Management Group immediately at
1-817-310-4999. Texas Health Management Group, its subsidiaries, and
affiliates hereby claim all applicable privileges related to this
information.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080418/85e10b3d/attachment.htm