VoIP Mailing List Archives

[dragisha at m3w.org]

Hi,

Since a week ago I am trying to get chan_misdn working with asterisk
1.4.19, using HFC based ISDN card on Linux 2.6.22.

My setup is done as detailed on wiki and FAQ.

* mISDN and miSDNusers are 1.1.7.2, unpacked, build and installed.
After installation and misdn-init, I have this:

aragorn:root/pts/1: # misdnportinfo

Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> childcnt: 2
--------

mISDN_close: fid(3) isize(131072) inbuf(0x9846060) irp(0x9846060)
iend(0x9846060)

/etc/asterisk/misdn.conf has this group definition:

[extern]
ports=1
context=misdn
msns=*

/etc/asterisk/extensions.conf has these contexts:

[default]
exten => 200,1,Dial(IAX2/duritji,,r)
exten => 201,1,Dial(IAX2/dragisha,,r)

exten => 202,1,misdn_check_l2l1(g:extern|2)
exten => 202,n,Dial(mISDN/g:extern/230210)

[misdn]
exten => _X,1,Dial(IAX2/duritji)
exten => _X,2,Hangup
IAX2 phones are locally configured/connected. Debug for misdn is set to
0x3

When I dial from outside, mu console (lots of -vvvvv's gives:

Asterisk Ready.
*CLI> P[ 0] MGMT: SSTATUS: L1_ACTIVATED
P[ 1] MGMT: SSTATUS: L2_ESTABLISH

*CLI> P[ 1] set_channel: bc->channel:0 channel:1
P[ 1] I IND :NEW_CHANNEL oad:056230210 dad: pid:2 state:none
P[ 1] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 1] --> caps:Audio 3.1k pi:0 keypad: sending_complete:1
P[ 1] Chan not existing at the moment bc->l3id:20003 bc:0x8568aa4
event:NEW_CHANNEL port:1 channel:1
P[ 1] NO USERUESRINFO
P[ 1] !! NO FREE CHAN IN STACK
P[ 1] I IND :SETUP oad:056230210 dad: pid:2 state:none
P[ 1] --> channel:1 mode:TE cause:16 ocause:34 rad: cad:
P[ 1] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 1] --> caps:Audio 3.1k pi:3 keypad: sending_complete:1
P[ 1] --> Call Waiting on PMP sending RELEASE_COMPLETE
P[ 1] I SEND:RELEASE_COMPLETE oad:056230210 dad: pid:2
P[ 1] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 1] --> caps:Audio 3.1k pi:3 keypad: sending_complete:1
P[ 1] $$$ CLEANUP CALLED pid:2
P[ 1] GOT IGNORE SETUP
P[ 1] CC_RELEASE_COMPLETE|CONFIRM [TE]
P[ 1] I IND :RELEASE_COMPLETE oad: dad: pid:2 state:none
P[ 1] --> channel:0 mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1] --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] --> no Ch, so we've already released.
P[ 0] Cannot hangup chan, no ch
P[ 1] release_chan: Ch not found!
P[ 1] $$$ CLEANUP CALLED pid:2
P[ 1] $$$ CLEANUP CALLED pid:2

And, after some time:

*CLI> P[ 1] MGMT: SSTATUS: L2_RELEASED
P[ 0] MGMT: SSTATUS: L1_DEACTIVATED


If I dial 202 extension, I get:

*CLI> -- Accepting AUTHENTICATED call from 89.111.228.14: