Tim at nsoptimum.co.uk
Guest
|
 Posted: Thu May 01, 2008 2:31 am Post subject: [asterisk-users] Was; Multiple Hunt Group to same extension |
 |
|
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tim Guy
Sent: 30 April 2008 18:22
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Multiple Hunt Group to same extension advice
| Quote: | Swapping out our old Mitel 3300 for Asterisk I need to come up with a
solution to advertise to the extension what hunt group the call was
|
for,
| Quote: | plus distinguishing those calls from calls that are sent straight to
|
the
OK I answered my own question. Use CALLERID NAME in the exten => except
that the Grandstream 1200 GXP I have on test will only disable the
CALLERID NAME not the NUMBER. Well it certainly does from extension to
extension, I currently can not hook it up to the PSTN
The Zoiper software phone does its job and displays both.
So I used exten => xxx,n,Set(CALLERID(name)=Technical:${CALLERID(name)})
Cracking
Cheers
Tim
This message is sent in confidence for the addressee only. Unless specifically stated, the contents are not to be disclosed to anyone other than the addressee. Unauthorised recipients must preserve this confidentiality and should please advise the sender immediately of any error in transmission. The views an opinions expressed in this e-mail message are the sender's own and do not necessarily represent the views and opinions of NS Optimum Ltd. Although this e-mail and attachments are believed to be free of any virus or other defects which may affect any computer or IT systems into which they are received, no responsibility is accepted by NS Optimum Ltd for any loss or damage arising in any way from the receipt or use thereof.
Place of registration: England, Registered Office: Jenton Road, Sydenham Ind Est, Leamington Spa, Warwickshire, CV31 1XS, Registered No 3018839 |
|
Search
