Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[asterisk-users] Newbie IVR: How to read() before playback()is finished?


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users
View previous topic :: View next topic  
Author Message
Guest






PostPosted: Wed May 07, 2008 11:55 pm    Post subject: [asterisk-users] Newbie IVR: How to read() before playback() Reply with quote

Quote:
the relaxdmtf (or similar) option in zaptel can make this work a bit
better...but it's a try at your own risk option!

PaulH

Thanks Paul.

I have further findings into the problem.

While the message is being played, if I press a key during the "pause"
or "break" between words, then the key will be able to be read properly.

So, it seems like the traffic on the pots network is pretty much
half-duplex.
On the LAN however, it is full-duplex and that is why I don't have such
problem with reading key pressed.

Any thoughts?
Back to top
eric at fnords.org
Guest





PostPosted: Thu May 08, 2008 12:40 am    Post subject: [asterisk-users] Newbie IVR: How to read() before playback() Reply with quote

Lee, John (Sydney) wrote:
Quote:
Quote:
the relaxdmtf (or similar) option in zaptel can make this work a bit
better...but it's a try at your own risk option!

PaulH

Thanks Paul.

I have further findings into the problem.

While the message is being played, if I press a key during the "pause"
or "break" between words, then the key will be able to be read properly.

So, it seems like the traffic on the pots network is pretty much
half-duplex.
On the LAN however, it is full-duplex and that is why I don't have such
problem with reading key pressed.

Play with the rxgain on your PSTN card. Increase it by 2 until it
works. If it doesn't work, try decreasing by 2 until it works. If it
still doesn't work then start playing with txgain (I've seen txgain
changes fix DTMF issues, don't know why)

--
Consulting for Asterisk, Polycom, Sangoma, Digium, Cisco, LAN, WAN, QoS,
T-1, PRI, Frame Relay, Linux, and network design. Based near
Birmingham, AL. Now accepting clients worldwide.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services