| View previous topic :: View next topic |
| Author |
Message |
astuser at westwoodvil...
Guest
|
 Posted: Thu May 15, 2008 10:07 am Post subject: [asterisk-users] caller-id on X100P fails frequently |
 |
|
Brian J. Murrell wrote:
| Quote: | I have a Wildcard FXO: Wildcard X100P (clone) in my Asterisk (1.4.17)
machine and as of late, Caller-ID on it seems to be failing more
frequently than not. Sometimes I get "callerid.c:613 callerid_feed:
Caller*ID failed checksum" sometimes it fails without even that.
|
It can fail for one of three reasons on an X100P card:
1. The caller blocked their caller ID
2. Your gains are not set correctly in zapata.conf (I believe the
one for caller id is rxgain).
3. You're using an X100P card...the caller ID hardware on it has
always had problems, and some X100P/X101P cards are worse than others.
| Quote: | Any ideas on how to make it more reliable?
|
Try adjusting your gains, or replacing the card. |
|
| Back to top |
|
 |
spamsucks2005 at gmail...
Guest
|
| Posted: Fri May 16, 2008 1:11 am Post subject: [asterisk-users] caller-id on X100P fails frequently |
|
|
On Thu, May 15, 2008 at 5:07 PM, Daniel Lynes
<astuser at westwoodvillagecomputers.com> wrote:
| Quote: | Brian J. Murrell wrote:
| Quote: | I have a Wildcard FXO: Wildcard X100P (clone) in my Asterisk (1.4.17)
machine and as of late, Caller-ID on it seems to be failing more
frequently than not. Sometimes I get "callerid.c:613 callerid_feed:
Caller*ID failed checksum" sometimes it fails without even that.
|
|
Also, try putting a one second wait() at the first priority in the
extension. I have had two X100Ps running in the same box for years and
they never miss CID when it's available. I think there were issues
without using wait() though. |
|
| Back to top |
|
|
|
Search
