VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
shmaltz at gmail.com
Guest
|
 Posted: Thu May 22, 2008 12:42 pm Post subject: [asterisk-users] Adit 600 password reset |
 |
|
In the manual it's mentioned that if the DIP switch marked RST is set
then it will reset CLI password.
I have not been successful in doing that. Has anyone tried it?
I bought one off eBay and can't get in because of username password
that I don't know. I am assuming local is set to off.
Thank you |
|
| Back to top |
|
 |
dwright at d2-tech.com
Guest
|
| Posted: Thu May 22, 2008 12:52 pm Post subject: [asterisk-users] Adit 600 password reset |
|
|
Are you trying ethernet or serial? Have you tried the other?
-Darren
________________________________
From: asterisk-users-bounces at lists.digium.com on behalf of C F
Sent: Thu 5/22/2008 1:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Adit 600 password reset
In the manual it's mentioned that if the DIP switch marked RST is set
then it will reset CLI password.
I have not been successful in doing that. Has anyone tried it?
I bought one off eBay and can't get in because of username password
that I don't know. I am assuming local is set to off.
Thank you
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com <http://www.api-digital.com/> --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This message was sent from D2 Technology, INC.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 4045 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20080522/94126cd1/attachment.bin |
|
| Back to top |
|
|
daw at xpance.net
Guest
|
| Posted: Thu May 22, 2008 2:34 pm Post subject: [asterisk-users] Adit 600 password reset |
|
|
Have you tried the following:
http://lists.digium.com/pipermail/asterisk-users/2003-May/004674.html
Aaron
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Darren Wright
Sent: Thursday, May 22, 2008 12:52 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Adit 600 password reset
Are you trying ethernet or serial? Have you tried the other?
-Darren
________________________________
From: asterisk-users-bounces at lists.digium.com on behalf of C F
Sent: Thu 5/22/2008 1:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Adit 600 password reset
In the manual it's mentioned that if the DIP switch marked RST is set
then it will reset CLI password.
I have not been successful in doing that. Has anyone tried it?
I bought one off eBay and can't get in because of username password
that I don't know. I am assuming local is set to off.
Thank you
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com<http://www.api-digital.com/> --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080522/35726e4e/attachment.htm |
|
| Back to top |
|
|
support at drdos.info
Guest
|
| Posted: Thu May 22, 2008 6:22 pm Post subject: [asterisk-users] Adit 600 password reset |
|
|
Aaron Wickware wrote:
The last I knew, if you have used 'set local off' on the console, the
dip switches are disabled. And, Carrier Access, now Turin, will charge
a bundle to have it reset.
Doug
**
--
Ben Franklin quote:
"Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety." |
|
| Back to top |
|
|
shmaltz at gmail.com
Guest
|
| Posted: Fri May 23, 2008 12:20 am Post subject: [asterisk-users] Adit 600 password reset |
|
|
serial, I don't know the IP address.
On Thu, May 22, 2008 at 1:52 PM, Darren Wright <dwright at d2-tech.com> wrote:
| Quote: | Are you trying ethernet or serial? Have you tried the other?
-Darren
________________________________
From: asterisk-users-bounces at lists.digium.com on behalf of C F
Sent: Thu 5/22/2008 1:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Adit 600 password reset
In the manual it's mentioned that if the DIP switch marked RST is set
then it will reset CLI password.
I have not been successful in doing that. Has anyone tried it?
I bought one off eBay and can't get in because of username password
that I don't know. I am assuming local is set to off.
Thank you
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com <http://www.api-digital.com/> --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This message was sent from D2 Technology, INC.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
| Back to top |
|
|
shmaltz at gmail.com
Guest
|
| Posted: Fri May 23, 2008 12:22 am Post subject: [asterisk-users] Adit 600 password reset |
|
|
As I pointed out in my original post, yes.
On Thu, May 22, 2008 at 3:34 PM, Aaron Wickware <daw at xpance.net> wrote:
| Quote: | Have you tried the following:
http://lists.digium.com/pipermail/asterisk-users/2003-May/004674.html
Aaron
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Darren Wright
Sent: Thursday, May 22, 2008 12:52 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Adit 600 password reset
Are you trying ethernet or serial? Have you tried the other?
-Darren
________________________________
From: asterisk-users-bounces at lists.digium.com on behalf of C F
Sent: Thu 5/22/2008 1:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Adit 600 password reset
In the manual it's mentioned that if the DIP switch marked RST is set
then it will reset CLI password.
I have not been successful in doing that. Has anyone tried it?
I bought one off eBay and can't get in because of username password
that I don't know. I am assuming local is set to off.
Thank you
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
| Back to top |
|
|
shmaltz at gmail.com
Guest
|
| Posted: Fri May 23, 2008 12:23 am Post subject: [asterisk-users] Adit 600 password reset |
|
|
On Thu, May 22, 2008 at 7:22 PM, Doug Lytle <support at drdos.info> wrote:
| Quote: | Aaron Wickware wrote:
The last I knew, if you have used 'set local off' on the console, the
dip switches are disabled. And, Carrier Access, now Turin, will charge
a bundle to have it reset.
|
Then there is basicly no way to do this besides for cracking it? I
have already figured out the username, now I just need to figure out
the password. What is a good screen automation program that can
bruteforce this for Windows?
|
|
| Back to top |
|
|
support at drdos.info
Guest
|
| Posted: Fri May 23, 2008 4:43 am Post subject: [asterisk-users] Adit 600 password reset |
|
|
C F wrote:
| Quote: |
Then there is basicly no way to do this besides for cracking it? I
|
Not that I am aware of, no. This subject went around several years
back. They also talk about brute forcing the password as well. As far
as I recall, nobody came back saying they were successful.
| Quote: | have already figured out the username, now I just need to figure out
the password. What is a good screen automation program that can
bruteforce this for Windows?
|
That I don't know. I suggest scanning the archives. It's been a few
years and I may have missed the message.
Do a search on
Help need to reset Adit 600 for Asterisk
There was a thread going on about this in November of 2005
Doug
--
Ben Franklin quote:
"Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety." |
|
| Back to top |
|
|
asterisk3 at shaneyoun...
Guest
|
| Posted: Fri May 23, 2008 8:19 am Post subject: [asterisk-users] Adit 600 password reset |
|
|
Quoting Doug Lytle <support at drdos.info>:
| Quote: | C F wrote:
| Quote: |
Then there is basicly no way to do this besides for cracking it? I
|
Not that I am aware of, no. This subject went around several years
back. They also talk about brute forcing the password as well. As far
as I recall, nobody came back saying they were successful.
| Quote: | have already figured out the username, now I just need to figure out
the password. What is a good screen automation program that can
bruteforce this for Windows?
|
|
I had the same problem with one of mine. I smply forgot the password.
I seem to recall that the adit had a flaw in it, where it was obvious
by the error message returned if you had the correct length username
and password, which should make your brute-force attempt much easier.
--Shane
---------------------------------------------------------------- |
|
| Back to top |
|
|
jra at baylink.com
Guest
|
| Posted: Fri May 23, 2008 9:29 am Post subject: [asterisk-users] Adit 600 password reset |
|
|
On Fri, May 23, 2008 at 01:20:58AM -0400, C F wrote:
| Quote: | serial, I don't know the IP address.
|
Loopback cable.
nmap -sP 0/1
nmap -sP 1/1
Cheers,
-- jra
--
Jay R. Ashworth Baylink jra at baylink.com
Designer The Things I Think RFC 2100
Ashworth & Associates http://baylink.pitas.com '87 e24
St Petersburg FL USA http://photo.imageinc.us +1 727 647 1274
Those who cast the vote decide nothing.
Those who count the vote decide everything.
-- (Joseph Stalin) |
|
| Back to top |
|
|
shmaltz at gmail.com
Guest
|
| Posted: Fri May 23, 2008 10:24 am Post subject: [asterisk-users] Adit 600 password reset |
|
|
seen that thread, it doesn't help me much since I only have seriel
access and no linux machine with a seriel port
On 5/23/08, Doug Lytle <support at drdos.info> wrote:
| Quote: | C F wrote:
| Quote: |
Then there is basicly no way to do this besides for cracking it? I
|
Not that I am aware of, no. This subject went around several years
back. They also talk about brute forcing the password as well. As far
as I recall, nobody came back saying they were successful.
| Quote: | have already figured out the username, now I just need to figure out
the password. What is a good screen automation program that can
bruteforce this for Windows?
|
That I don't know. I suggest scanning the archives. It's been a few
years and I may have missed the message.
Do a search on
Help need to reset Adit 600 for Asterisk
There was a thread going on about this in November of 2005
Doug
--
Ben Franklin quote:
"Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither Liberty nor Safety."
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
| Back to top |
|
|
shmaltz at gmail.com
Guest
|
| Posted: Fri May 23, 2008 10:26 am Post subject: [asterisk-users] Adit 600 password reset |
|
|
yes that's how I figured out the username. since it returned incorrect
login before the password prompt on the wrong username.
I a don't know the password however.
On 5/23/08, Shane Young <asterisk3 at shaneyoung.com> wrote:
| Quote: | Quoting Doug Lytle <support at drdos.info>:
| Quote: | C F wrote:
| Quote: |
Then there is basicly no way to do this besides for cracking it? I
|
Not that I am aware of, no. This subject went around several years
back. They also talk about brute forcing the password as well. As far
as I recall, nobody came back saying they were successful.
| Quote: | have already figured out the username, now I just need to figure out
the password. What is a good screen automation program that can
bruteforce this for Windows?
|
|
I had the same problem with one of mine. I smply forgot the password.
I seem to recall that the adit had a flaw in it, where it was obvious
by the error message returned if you had the correct length username
and password, which should make your brute-force attempt much easier.
--Shane
----------------------------------------------------------------
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
| Back to top |
|
|
jjones at danrj.com
Guest
|
| Posted: Thu May 29, 2008 8:22 am Post subject: [asterisk-users] Adit 600 password reset |
|
|
Just noticed end of thread here. Not sure if it was mentioned but the
newer - less than a few years - have a backdoor that works. Have not
been able to get it to work on older units though. Here are my notes
from the last time I tried - no warranties from me;)
Obviously via a serial connection.
PowerON
Restoring "Factory" Defaults
Stop the boot
press 1 and enter
type e db and enter
BOOT [?,c,p,t,x,y,z]: 1
BOOT debug ON
BOOT [?,c,p,v,t,x,y,z,@]: e db
Preserving Mac= 0:e0:92:0:83:8
Flash Man=Atmel(1f) Dev-AT29LV010A(35) 8K Locks: Lo=NO(fe) Hi=NO(fe)
Erasing App DB?
Erase Done!
BOOT [?,c,p,v,t,x,y,z,@]: 0
BOOT debug OFF
BOOT [?,c,p,t,x,y,z]: x
Looking for valid application image in Flash?
One Moment >>> Decompressing Image?
Attached TCP/IP interface to cpm unit 0
Attaching interface lo0?done
System startup
ERROR: Unable to recover db from flash.
Creating new flash image.
CRC Error in OEM Data
[????????]
Startup complete
On May 23, 2008, at 10:26 AM, C F wrote:
| Quote: | yes that's how I figured out the username. since it returned incorrect
login before the password prompt on the wrong username.
I a don't know the password however.
On 5/23/08, Shane Young <asterisk3 at shaneyoung.com> wrote:
| Quote: | Quoting Doug Lytle <support at drdos.info>:
| Quote: | C F wrote:
| Quote: |
Then there is basicly no way to do this besides for cracking it? I
|
Not that I am aware of, no. This subject went around several years
back. They also talk about brute forcing the password as well.
As far
as I recall, nobody came back saying they were successful.
| Quote: | have already figured out the username, now I just need to figure
out
the password. What is a good screen automation program that can
bruteforce this for Windows?
|
|
I had the same problem with one of mine. I smply forgot the
password.
I seem to recall that the adit had a flaw in it, where it was obvious
by the error message returned if you had the correct length username
and password, which should make your brute-force attempt much easier.
--Shane
----------------------------------------------------------------
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
|
| Back to top |
|
|
shmaltz at gmail.com
Guest
|
| Posted: Thu May 29, 2008 5:36 pm Post subject: [asterisk-users] Adit 600 password reset |
|
|
Looks promising will try it and let you know.
Thank you
On Thu, May 29, 2008 at 9:22 AM, Jerry Jones <jjones at danrj.com> wrote:
| Quote: | Just noticed end of thread here. Not sure if it was mentioned but the
newer - less than a few years - have a backdoor that works. Have not
been able to get it to work on older units though. Here are my notes
from the last time I tried - no warranties from me;)
Obviously via a serial connection.
PowerON
Restoring "Factory" Defaults
Stop the boot
press 1 and enter
type e db and enter
BOOT [?,c,p,t,x,y,z]: 1
BOOT debug ON
BOOT [?,c,p,v,t,x,y,z,@]: e db
Preserving Mac= 0:e0:92:0:83:8
Flash Man=Atmel(1f) Dev-AT29LV010A(35) 8K Locks: Lo=NO(fe) Hi=NO(fe)
Erasing App DB?
Erase Done!
BOOT [?,c,p,v,t,x,y,z,@]: 0
BOOT debug OFF
BOOT [?,c,p,t,x,y,z]: x
Looking for valid application image in Flash?
One Moment >>> Decompressing Image?
Attached TCP/IP interface to cpm unit 0
Attaching interface lo0?done
System startup
ERROR: Unable to recover db from flash.
Creating new flash image.
CRC Error in OEM Data
[????????]
Startup complete
On May 23, 2008, at 10:26 AM, C F wrote:
| Quote: | yes that's how I figured out the username. since it returned incorrect
login before the password prompt on the wrong username.
I a don't know the password however.
On 5/23/08, Shane Young <asterisk3 at shaneyoung.com> wrote:
| Quote: | Quoting Doug Lytle <support at drdos.info>:
| Quote: | C F wrote:
| Quote: |
Then there is basicly no way to do this besides for cracking it? I
|
Not that I am aware of, no. This subject went around several years
back. They also talk about brute forcing the password as well.
As far
as I recall, nobody came back saying they were successful.
| Quote: | have already figured out the username, now I just need to figure
out
the password. What is a good screen automation program that can
bruteforce this for Windows?
|
|
I had the same problem with one of mine. I smply forgot the
password.
I seem to recall that the adit had a flaw in it, where it was obvious
by the error message returned if you had the correct length username
and password, which should make your brute-force attempt much easier.
--Shane
----------------------------------------------------------------
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
