VoIP Mailing List Archives

[danlock2 at gmail.com]

In my Asterisk CLI I get Ring/Off-hook in strange state 6 when i make
a call into the system, the system claims to answer the call, and do
the things in the dial plan, but I just hear ringing on the phone I'm
calling in from.

I am using a Sangoma A200 4 Port Analog card.
my wanrouter version: WANPIPE Release: 3.3.6
asterisk -V: PBXtra Core fon_o_1.2.17
Any ideas?

Daniel Lockard

[danlock2 at gmail.com]

[sherwood.mcgowan at gm...]

Daniel Lockard wrote:

[tnelson at rockbochs.com]

I posted about this exact same problem about a month or two ago and got no replies. The problem was an A200D with Wanpipe 3.2.1. We've since made some changes to this installation and the problems have gone away. The changes were specifically getting a new local loop from the telco on the problem lines and recabling from the demarc to the * box. So, check your cabling carefully to make sure it is in good repair. If everything checks out, hopefully you can convince your local telco to get you a new loop. Luckily, the telco we use primarily in our area is relatively small and has fantastic support.

Tim Nelson
Systems/Network Support
Rockbochs Inc.

----- Original Message -----
From: "Danny Lockard" <danlock2 at gmail.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Sent: Friday, May 23, 2008 11:54:09 AM GMT -06:00 US/Canada Central
Subject: Re: [asterisk-users] Strange State 6 on Channel X

Well, then it might not be that that is causing me issues? I have no idea why I would be able to call in, hear ringing on my phone, and then have the CLI tell me that it has answered...

Daniel Lockard
On 5/23/08, Sherwood McGowan < sherwood.mcgowan at gmail.com > wrote:

Daniel Lockard wrote: