VoIP Mailing List Archives

[brucek at bagel.com]

Is anyone using Asterisk with a Linksys SPA8000 and if so, how are you
configuring it (the SPA8000)? Is there a config utility similar to the
one for the PAP2-NA?

TIA

Bruce Komito
WPTI Telecom
(775) 236-5815

[tommym2006 at gmail.com]

For now I'm configuring it through the web interface on the lan port, then
having it access an Asterisk server that is on the wan port's subnet.
One problem I had with one of the units I have, but have not tested this on
others is that if I have it configured to hit an Asterisk server on the
local subnet it works fine.
If I have it hit an Asterisk server out on the internet not all lines
register.
This even occurs if the Linksys and Asterisk servers are both on public ip
addresses and do not have nat between them.
I really don't understand why this happens, but the solution I've found is
to let your Asterisk server be your interface to the internet and let your
Linksys be your FXS interface to your Asterisk.

Tom
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Bruce Komito
Sent: Monday, May 26, 2008 10:11 AM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Asterisk and Linksys SPA8000?

Is anyone using Asterisk with a Linksys SPA8000 and if so, how are you
configuring it (the SPA8000)? Is there a config utility similar to the
one for the PAP2-NA?

TIA

Bruce Komito
WPTI Telecom
(775) 236-5815




_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users