VoIP Mailing List Archives

[Christopher.Hoff at SE...]

I'm trying to get a Qwest PRI configured and working with my lab
Asterisk server. They said that the switchtype is 5ess and the signaling
is pri_cpe. My entries into zaptel.conf are:

span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us
channels=1-23
And my entries in zapata.conf are:

language=en
context=telco-incoming
switchtype=5ess
signalling=pri_cpe
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
group = 1
switchtype = 5ess
signalling = pri_cpe
group = 1
channel => 1-23

I'm not able to make/receive calls, and the error I'm receiving is:

[Jun 10 11:32:37] WARNING[31768]: chan_zap.c:2393 pri_find_dchan: No
D-channels available! Using Primary channel 24 as D-channel anyway!
== Primary D-Channel on span 1 down

Qwest says that the PRI is fine. I have a green light on the PRI card.

Help!



_______________________________



Chris Hoff

Telecommunications Administrator

SEI LLC

Voice +1 701 298 8865 Ext 2189

Mobile +1 701 361 5976

Fax +1 701 298 8860

Email christopher.hoff at seillc.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080610/f943ce42/attachment.htm

[jsmith at digium.com]

On Tue, 2008-06-10 at 16:22 -0500, Christopher Hoff wrote:

[matt at mattgwatson.ca]

1. Ditch the channels= in zaptel.conf that doesnt belong there (you've done
the channel config with the bchan= and dchan=
2. your span= should *probably* be 1,1 instead of 1,0 in zaptel.conf the
2nd "1" indicates to use that span as a primary timing source
3. not that it should matter, but you don;t need the duplicate group=,
signalling=, switchtype= in zapata.conf
4. you can ditch rxwink= that setting is for non-PRI T1s

try that and see if that helps... I suspect the span not being used as primary
timing source is whats causing your greif.

good luck!

--
Matt Watson
http://www.mattgwatson.ca

On June 10, 2008 05:22:40 pm Christopher Hoff wrote:

[enunez at netoneint.com]

Here is my configuration with Global Crossing. Hope this helps.



Zaptel.co





# Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" B8ZS/ESF ClockSource

span=1,1,0,esf,b8zs

# termtype: te

bchan=1-23

dchan=24





Zapata.conf



mode=mixed



signalling=pri_cpe

context=incoming-att

group=1

channel => 1-23









From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Christopher
Hoff
Sent: Tuesday, June 10, 2008 5:23 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Problems configuring a PRI...



I'm trying to get a Qwest PRI configured and working with my lab Asterisk
server. They said that the switchtype is 5ess and the signaling is pri_cpe.
My entries into zaptel.conf are:

span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us
channels=1-23
And my entries in zapata.conf are:

language=en
context=telco-incoming
switchtype=5ess
signalling=pri_cpe
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
group = 1
switchtype = 5ess
signalling = pri_cpe
group = 1
channel => 1-23

I'm not able to make/receive calls, and the error I'm receiving is:

[Jun 10 11:32:37] WARNING[31768]: chan_zap.c:2393 pri_find_dchan: No
D-channels available! Using Primary channel 24 as D-channel anyway!
== Primary D-Channel on span 1 down

Qwest says that the PRI is fine. I have a green light on the PRI card.

Help!



_______________________________



Chris Hoff

Telecommunications Administrator

SEI LLC

Voice +1 701 298 8865 Ext 2189

Mobile +1 701 361 5976

Fax +1 701 298 8860

Email christopher.hoff at seillc.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080610/8a7b3999/attachment.htm

[tzafrir.cohen at xorco...]

On Tue, Jun 10, 2008 at 04:22:40PM -0500, Christopher Hoff wrote: