VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
stotaro at totarotechn...
Guest
|
 Posted: Thu Jun 12, 2008 9:39 am Post subject: [asterisk-users] Using Asterisk Only as Voice Recording Solu |
 |
|
On Thu, Jun 12, 2008 at 11:16 AM, Syed Nasruddin <nasruddin at ncel.com.pk> wrote:
| Quote: |
HI,
I am using TDM800P Digium Card with Asterisk 1.4.* version. I have fair
command over Asterisk up till now and have run it in different scenarios
such as Call Center Solution, PBX solution.
There is a requirement to use Asterisk only as Voice Recording solution in
following manner:
Physical POT lines before entering into our native PBX will be splitted and
one of each of those lines will also enter into our Asterisk System.
Once the call is routed by our native PBX and recipient picks up the phone
(either SIP phone or Analog Phone) I should be able to start recording the
call.
When the call ends, the recording should stop.
Problem being faced by me is this that I am able to catch the call in my
diaplan and initialize MixMonitor but since my diaplan never detects
OFF-HOOK/ON_HOOK condition it continue to wait and finally hang-up while in
actual the call is running through our PBX.
Is there any channel variable or any other mechanism by which I can
accomplish this task? Since i will not be using any Dial() or similar
application I will be needing some kind of OFF-HOOK trigger/Event in my
dialplan.
Your help will be highly appreciated.
regards
Syed Nasruddin
|
It may not be possible to do this in parallel the way you are trying
now. In series should be a simple task.
Just pass the call through Asterisk as the man in the middle, the
dialplan will be very simple.
Thanks,
Steve T |
|
| Back to top |
|
 |
gavin.henry at gmail.com
Guest
|
| Posted: Fri Jun 13, 2008 3:49 pm Post subject: [asterisk-users] Using Asterisk Only as Voice Recording Solu |
|
|
2008/6/12 Syed Nasruddin <nasruddin at ncel.com.pk>:
| Quote: |
HI,
I am using TDM800P Digium Card with Asterisk 1.4.* version. I have fair
command over Asterisk up till now and have run it in different scenarios
such as Call Center Solution, PBX solution.
There is a requirement to use Asterisk only as Voice Recording solution in
following manner:
Physical POT lines before entering into our native PBX will be splitted and
one of each of those lines will also enter into our Asterisk System.
Once the call is routed by our native PBX and recipient picks up the phone
(either SIP phone or Analog Phone) I should be able to start recording the
call.
When the call ends, the recording should stop.
|
Our clients use this for E1 Pri: http://www.voicetronix.com/logger.htm
Not sure if there is a analogue solution.
--
http://www.suretecsystems.com/services/openldap/ |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
