| View previous topic :: View next topic |
| Author |
Message |
vincent.delporte at bi...
Guest
|
 Posted: Wed Jun 18, 2008 11:21 am Post subject: [asterisk-users] [FreeBSD 6.3] Zaptel stops responding |
 |
|
Hello
This PC had been running a Ports-compiled Asterisk 1.4.16.x
succesfully for almost three months, but this morning, although
Asterisk itself seemed fined, the Zaptel interface stopped taking
calls.
Stopping/restarting Zaptel using /usr/local/etc/rc.d/zaptel stop-start
didn't let things recover.
Since I didn't know better, I had to reboot the host to get things
working. I used this opportunity to upgrade to Asterisk 1.4.20.1_1 and
Zaptel 1.4.6_5.
The hardware is an OpenVox PCI card with a single FXO module. I know,
it's not a $200 Sangoma, but then, we only get a few calls/day.
Has someone seen this before? Any idea what happened, and what to do
to recuce the probabilty that it happens again? For instance, since
it's a low-use host, (I don't mind running a CRON job to stop/start
the driver a couple of times a day to keep things running.
Thanks for any hint. |
|
| Back to top |
|
 |
tilghman at mail.jeffa...
Guest
|
| Posted: Wed Jun 18, 2008 12:47 pm Post subject: [asterisk-users] [FreeBSD 6.3] Zaptel stops responding |
|
|
On Wednesday 18 June 2008 11:21:07 Vincent wrote:
| Quote: | The hardware is an OpenVox PCI card with a single FXO module. I know,
it's not a $200 Sangoma, but then, we only get a few calls/day.
|
Please call the reseller from which you bought the card or the manufacturer
for support.
--
Tilghman |
|
| Back to top |
|
|
vincent.delporte at bi...
Guest
|
| Posted: Thu Jun 19, 2008 4:36 am Post subject: [asterisk-users] [FreeBSD 6.3] Zaptel stops responding |
|
|
On Wed, 18 Jun 2008 12:47:04 -0500, Tilghman Lesher
<tilghman at mail.jeffandtilghman.com> wrote:
| Quote: | Please call the reseller from which you bought the card or the manufacturer
for support.
|
Will do, although it could be a problem in the Zaptel code, which is
not written by the mfg. Thanks. |
|
| Back to top |
|
|
vincent.delporte at bi...
Guest
|
| Posted: Fri Jun 20, 2008 1:46 am Post subject: [asterisk-users] [FreeBSD 6.3] Zaptel stops responding |
|
|
On Thu, 19 Jun 2008 11:36:27 +0200, Vincent
<vincent.delporte at bigfoot.com> wrote:
| Quote: | Will do, although it could be a problem in the Zaptel code, which is
not written by the mfg. Thanks.
|
I also notice that I can't restart the driver:
# /usr/local/etc/rc.d/zaptel restart
zaptelkldunload: can't unload file: Device busy
zaptelkldload: can't load /usr/local/lib/zaptel/zaptel.ko: File
exists |
|
| Back to top |
|
|
|
Search
