VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
asterisk at barendse.to
Guest
|
 Posted: Fri Jun 20, 2008 2:33 am Post subject: [asterisk-users] Asterisk 1.4.21 stalls? |
 |
|
Ip upgraded yesterday from Asterisk 1.4.20.1 to 1.4.21
The update seems to work ok, when asterisk is started all is fine.
However after some time it is not possible to call anymore, my Snom
display simply shows Not available and incoming calls from the PRI fail,
like the PRI is not connected.
Reverting back to 1.4.20.1 solves the problem.
I tried re-installing and re-compiling 1.4.21 and all the modules several
times, didn't help.
Anyone else seeing this? |
|
| Back to top |
|
 |
asterisk-list at puzzl...
Guest
|
| Posted: Fri Jun 20, 2008 6:33 am Post subject: [asterisk-users] Asterisk 1.4.21 stalls? |
|
|
Hi Remco,
On Fri, 2008-06-20 at 09:33 +0200, Remco Barendse wrote:
| Quote: | Ip upgraded yesterday from Asterisk 1.4.20.1 to 1.4.21
|
I did the same yesterday.
| Quote: | The update seems to work ok, when asterisk is started all is fine.
|
Yup.
| Quote: | However after some time it is not possible to call anymore, my Snom
display simply shows Not available and incoming calls from the PRI fail,
like the PRI is not connected.
|
That's not good at all.
| Quote: | Reverting back to 1.4.20.1 solves the problem.
I tried re-installing and re-compiling 1.4.21 and all the modules several
times, didn't help.
Anyone else seeing this?
|
Nope but on this 1.4.21 box I am using an Eicon Diva Server card and
that has always worked rock solid.
Make sure you start Asterisk with -g so it can dump core, set
appropriate values for ulimit and log everything (logger.conf). Maybe
you will then get more info what's going on.
Good luck!
Regards,
Patrick |
|
| Back to top |
|
|
marcin.kowalczyk at cc...
Guest
|
| Posted: Fri Jun 20, 2008 6:45 am Post subject: [asterisk-users] Asterisk 1.4.21 stalls? |
|
|
Remco Barendse pisze:
| Quote: | However after some time it is not possible to call anymore, my Snom
display simply shows Not available and incoming calls from the PRI fail,
like the PRI is not connected.
Reverting back to 1.4.20.1 solves the problem.
I tried re-installing and re-compiling 1.4.21 and all the modules several
times, didn't help.
Anyone else seeing this?
|
I have same problem. I'm just downgrading to 1.4.20.1 |
|
| Back to top |
|
|
tilghman at mail.jeffa...
Guest
|
| Posted: Fri Jun 20, 2008 10:26 am Post subject: [asterisk-users] Asterisk 1.4.21 stalls? |
|
|
On Friday 20 June 2008 02:33:04 Remco Barendse wrote:
| Quote: | Ip upgraded yesterday from Asterisk 1.4.20.1 to 1.4.21
The update seems to work ok, when asterisk is started all is fine.
However after some time it is not possible to call anymore, my Snom
display simply shows Not available and incoming calls from the PRI fail,
like the PRI is not connected.
Reverting back to 1.4.20.1 solves the problem.
I tried re-installing and re-compiling 1.4.21 and all the modules several
times, didn't help.
Anyone else seeing this?
|
If you could recompile with DONT_OPTIMIZE and DEBUG_THREADS enabled
in the compiler flags (in 'make menuselect') and obtain a 'core show locks'
when this occurs, then upload the resulting output to an issue on
bugs.digium.com, that would help a great deal in tracking down where exactly
the problem lies.
--
Tilghman |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
