VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
asteriskator at gmail.com
Guest
|
 Posted: Fri Jun 27, 2008 12:20 pm Post subject: [asterisk-users] polycom with http/https basic authenticatio |
 |
|
Hi,
I apologize that this is not directly associated with Asterisk, I have
been trying to solve this, but not having any luck.
Does anyone have a setup with http or https with basic authentication
for provisioning Polycom Phones. We use edgemarc 4500 routers and use
Option 66 to auto-provision phones using DHCP. I am trying to set up
an apache server with subdirectories for different customers protected
by a username and password so that their phones can only access their
own directory.
The string I am putting in Option 66 is:
"http://username:password at http.server.com/dir1/"
This is packet dumps of the polycom phone trying to grab files from
the server - using basic authentication - I have set up .htaccess
files which work correctly when pulling down files using firefox.
GET FILE WITH POLYCOM
[root at server3 ~]# ngrep -q 'HTTP/1.[01]'
interface: eth0 (XXX.XXX.XXX.XXX/255.255.254.0)
match: HTTP/1.[01]
T XXX.XXX.XXX.XXX:1024 -> XXX.XXX.XXX.XXX [AP]
GET /dir1/2345-12200-002.bootrom.ld HTTP/1.1..Host:
http.server.com..Accept: */*..U
ser-Agent: FileTransport PolycomSoundPointIP-SPIP_320-UA/4.0.0.0423....
T XXX.XXX.XXX.XXX:80 -> XXX.XXX.XXX.XXX:1024 [AP]
HTTP/1.1 401 Authorization Required..Date: Fri, 27 Jun 2008 16:46:59
GMT..Server: A
pache/2.0.61 (Unix) mod_ssl/2.0.61 OpenSSL/0.9.8b
mod_auth_passthrough/2.1 mod_bwli
mited/1.4 FrontPage/5.0.2.2635 PHP/5.2.5..WWW-Authenticate: Basic
realm="Restricted
Area"..Content-Length: 703..Content-Type: text/html;
charset=iso-8859-1....<!DOCTY
PE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">.<html><head>.<title>401
Authorization R
equired</title>.</head><body>.<h1>Authorization
Required</h1>.<p>This server could
not verify that you.are authorized to access the document.requested.
Either you su
pplied the wrong.credentials (e.g., bad password), or your.browser
doesn't understa
nd how to supply.the credentials required.</p>.<p>Additionally, a
404 Not Found.err
or was encountered while trying to use an ErrorDocument to handle
the request.</p>.
<hr>.<address>Apache/2.0.61 (Unix) mod_ssl/2.0.61 OpenSSL/0.9.8b
mod_auth_passthrou
gh/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 PHP/5.2.5 Server at
prov.xiptel.net P
ort 80</address>.</body></html>.
T XXX.XXX.XXX.XXX:1025 -> XXX.XXX.XXX.XXX:80 [AP]
GET /dir1/bootrom.ld HTTP/1.1..Host: http.server.com..Accept:
*/*..User-Agent: File
Transport PolycomSoundPointIP-SPIP_320-UA/4.0.0.0423....
USING FIREFOX
[root at server3 ~]# ngrep -q 'HTTP/1.[01]'
interface: eth0 (69.73.146.0/255.255.254.0)
match: HTTP/1.[01]
T XXX.XXX.XXX.XXX:57773 -> XXX.XXX.XXX.XXX:80 [AP]
GET /dir1/2345-11300-010.bootrom.ld HTTP/1.1..Host:
http.server.com..User-Agent: Mo
zilla/5.0 (X11; U; Linux i686; en-US; rv:1.9) Gecko/2008061015
Firefox/3.0..Accept:
text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8..Accept-Language:
en-us,en;q=0.5..Accept-Encoding: gzip,deflate..Accept-Charset:
ISO-8859-1,utf-8;q=0
.7,*;q=0.7..Keep-Alive: 300..Connection: keep-alive..Referer:
http://prov.xiptel.ne
t/dir1/..Cookie: logintheme=cpanel; cprelogin=no; cpsession=closed....
T XXX.XXX.XXX.XXX:80 -> XXX.XXX.XXX.XXX:57773 [AP]
HTTP/1.1 401 Authorization Required..Date: Fri, 27 Jun 2008 16:36:20
GMT..Server: A
pache/2.0.61 (Unix) mod_ssl/2.0.61 OpenSSL/0.9.8b
mod_auth_passthrough/2.1 mod_bwli
mited/1.4 FrontPage/5.0.2.2635 PHP/5.2.5..WWW-Authenticate: Basic
realm="Restricted
Area"..Content-Length: 703..Keep-Alive: timeout=15,
max=100..Connection: Keep-Aliv
e..Content-Type: text/html; charset=iso-8859-1....<!DOCTYPE HTML
PUBLIC "-//IETF//D
TD HTML 2.0//EN">.<html><head>.<title>401 Authorization
Required</title>.</head><bo
dy>.<h1>Authorization Required</h1>.<p>This server could not verify
that you.are au
thorized to access the document.requested. Either you supplied the
wrong.credentia
ls (e.g., bad password), or your.browser doesn't understand how to
supply.the crede
ntials required.</p>.<p>Additionally, a 404 Not Found.error was
encountered while t
rying to use an ErrorDocument to handle the
request.</p>.<hr>.<address>Apache/2.0.6
1 (Unix) mod_ssl/2.0.61 OpenSSL/0.9.8b mod_auth_passthrough/2.1
mod_bwlimited/1.4 F
rontPage/5.0.2.2635 PHP/5.2.5 Server at prov.xiptel.net Port
80</address>.</body></
html>.
T XXX.XXX.XXX.XXX:57773 -> XXX.XXX.XXX.XXX:80 [AP]
GET /dir1/2345-11300-010.bootrom.ld HTTP/1.1..Host:
http.server.com..User-Agent: Mo
zilla/5.0 (X11; U; Linux i686; en-US; rv:1.9) Gecko/2008061015
Firefox/3.0..Accept:
text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8..Accept-Language:
en-us,en;q=0.5..Accept-Encoding: gzip,deflate..Accept-Charset:
ISO-8859-1,utf-8;q=0
.7,*;q=0.7..Keep-Alive: 300..Connection: keep-alive..Referer:
http://prov.xiptel.ne
t/dir1/..Cookie: logintheme=cpanel; cprelogin=no;
cpsession=closed..Authorization:
Basic ZGlyMTppcGd2MTMxNA==....
As you can see, the server responds asking for authorization
credentials, which are not responded to by the Polycom in its next
HTTP message, whereas with a browser, when I type in my username and
password in the dialog box, a response is made.
I have been assured by Polycom that basic authentication works with
their new models of phones - I am using a ip320. Further their admin
guide states:
"The protocol that will be used to transfer files from the boot server
depends on
several factors including the phone model and whether the bootROM or SIP
application stage of provisioning is in progress. By default, the phones are
shipped with FTP enabled as the provisioning protocol. If an unsupported
protocol is specified, this may result in a defined behavior (see the
table below
for details of which protocol the phone will use). The Specified Protocol listed
in the table can be selected in the Server Type field or the Server Address can
include a transfer protocol, for example http://usr:pwd at server (refer to
Server Menu on page 3-9). The boot server address can be an IP address,
domain string name, or URL. The boot server address can also be obtained
through DHCP. Configuration file names in the <Ethernet address>.cfg file
can include a transfer protocol, for example
https://usr:pwd at server/dir/file.cfg. If a user name and password are
specified as part of the server address or file name, they will be
used only if the
server supports them."
Anyone familiar with this situation, or have a different Option 66
string? or any troubleshooting tips
Thanks
Robert |
|
| Back to top |
|
 |
Alex.Lopez at OpSys.com
Guest
|
| Posted: Fri Jun 27, 2008 1:07 pm Post subject: [asterisk-users] polycom with http/https basic authenticatio |
|
|
I could never get the http stuff to work, I tried Ftp like what you have
ftp://user:password at server/customomer
It worked fine for me the first time, and I just ran with it. Has worked
without an issue since day one. If FTP not an option for you????
Alex
| Quote: | -----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
bounces at lists.digium.com] On Behalf Of Robert McNaught
Sent: Friday, June 27, 2008 1:20 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] polycom with http/https basic authentication
Hi,
I apologize that this is not directly associated with Asterisk, I have
been trying to solve this, but not having any luck.
Does anyone have a setup with http or https with basic authentication
for provisioning Polycom Phones. We use edgemarc 4500 routers and use
Option 66 to auto-provision phones using DHCP. I am trying to set up
an apache server with subdirectories for different customers protected
by a username and password so that their phones can only access their
own directory.
The string I am putting in Option 66 is:
"http://username:password at http.server.com/dir1/"
This is packet dumps of the polycom phone trying to grab files from
the server - using basic authentication - I have set up .htaccess
files which work correctly when pulling down files using firefox.
GET FILE WITH POLYCOM
[root at server3 ~]# ngrep -q 'HTTP/1.[01]'
interface: eth0 (XXX.XXX.XXX.XXX/255.255.254.0)
match: HTTP/1.[01]
T XXX.XXX.XXX.XXX:1024 -> XXX.XXX.XXX.XXX [AP]
GET /dir1/2345-12200-002.bootrom.ld HTTP/1.1..Host:
http.server.com..Accept: */*..U
ser-Agent: FileTransport
|
PolycomSoundPointIP-SPIP_320-UA/4.0.0.0423....
| Quote: |
T XXX.XXX.XXX.XXX:80 -> XXX.XXX.XXX.XXX:1024 [AP]
HTTP/1.1 401 Authorization Required..Date: Fri, 27 Jun 2008 16:46:59
GMT..Server: A
pache/2.0.61 (Unix) mod_ssl/2.0.61 OpenSSL/0.9.8b
mod_auth_passthrough/2.1 mod_bwli
mited/1.4 FrontPage/5.0.2.2635 PHP/5.2.5..WWW-Authenticate: Basic
realm="Restricted
Area"..Content-Length: 703..Content-Type: text/html;
charset=iso-8859-1....<!DOCTY
PE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">.<html><head>.<title>401
Authorization R
equired</title>.</head><body>.<h1>Authorization
Required</h1>.<p>This server could
not verify that you.are authorized to access the document.requested.
Either you su
pplied the wrong.credentials (e.g., bad password), or your.browser
doesn't understa
nd how to supply.the credentials required.</p>.<p>Additionally, a
404 Not Found.err
or was encountered while trying to use an ErrorDocument to handle
the request.</p>.
<hr>.<address>Apache/2.0.61 (Unix) mod_ssl/2.0.61 OpenSSL/0.9.8b
mod_auth_passthrou
gh/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 PHP/5.2.5 Server at
prov.xiptel.net P
ort 80</address>.</body></html>.
T XXX.XXX.XXX.XXX:1025 -> XXX.XXX.XXX.XXX:80 [AP]
GET /dir1/bootrom.ld HTTP/1.1..Host: http.server.com..Accept:
*/*..User-Agent: File
Transport PolycomSoundPointIP-SPIP_320-UA/4.0.0.0423....
USING FIREFOX
[root at server3 ~]# ngrep -q 'HTTP/1.[01]'
interface: eth0 (69.73.146.0/255.255.254.0)
match: HTTP/1.[01]
T XXX.XXX.XXX.XXX:57773 -> XXX.XXX.XXX.XXX:80 [AP]
GET /dir1/2345-11300-010.bootrom.ld HTTP/1.1..Host:
http.server.com..User-Agent: Mo
zilla/5.0 (X11; U; Linux i686; en-US; rv:1.9) Gecko/2008061015
Firefox/3.0..Accept:
|
text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8..Accept-
| Quote: | Language:
en-us,en;q=0.5..Accept-Encoding: gzip,deflate..Accept-Charset:
ISO-8859-1,utf-8;q=0
.7,*;q=0.7..Keep-Alive: 300..Connection: keep-alive..Referer:
http://prov.xiptel.ne
t/dir1/..Cookie: logintheme=cpanel; cprelogin=no;
|
cpsession=closed....
| Quote: |
T XXX.XXX.XXX.XXX:80 -> XXX.XXX.XXX.XXX:57773 [AP]
HTTP/1.1 401 Authorization Required..Date: Fri, 27 Jun 2008 16:36:20
GMT..Server: A
pache/2.0.61 (Unix) mod_ssl/2.0.61 OpenSSL/0.9.8b
mod_auth_passthrough/2.1 mod_bwli
mited/1.4 FrontPage/5.0.2.2635 PHP/5.2.5..WWW-Authenticate: Basic
realm="Restricted
Area"..Content-Length: 703..Keep-Alive: timeout=15,
max=100..Connection: Keep-Aliv
e..Content-Type: text/html; charset=iso-8859-1....<!DOCTYPE HTML
PUBLIC "-//IETF//D
TD HTML 2.0//EN">.<html><head>.<title>401 Authorization
Required</title>.</head><bo
dy>.<h1>Authorization Required</h1>.<p>This server could not verify
that you.are au
thorized to access the document.requested. Either you supplied the
wrong.credentia
ls (e.g., bad password), or your.browser doesn't understand how to
supply.the crede
ntials required.</p>.<p>Additionally, a 404 Not Found.error was
encountered while t
rying to use an ErrorDocument to handle the
request.</p>.<hr>.<address>Apache/2.0.6
1 (Unix) mod_ssl/2.0.61 OpenSSL/0.9.8b mod_auth_passthrough/2.1
mod_bwlimited/1.4 F
rontPage/5.0.2.2635 PHP/5.2.5 Server at prov.xiptel.net Port
80</address>.</body></
html>.
T XXX.XXX.XXX.XXX:57773 -> XXX.XXX.XXX.XXX:80 [AP]
GET /dir1/2345-11300-010.bootrom.ld HTTP/1.1..Host:
http.server.com..User-Agent: Mo
zilla/5.0 (X11; U; Linux i686; en-US; rv:1.9) Gecko/2008061015
Firefox/3.0..Accept:
|
text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8..Accept-
| Quote: | Language:
en-us,en;q=0.5..Accept-Encoding: gzip,deflate..Accept-Charset:
ISO-8859-1,utf-8;q=0
.7,*;q=0.7..Keep-Alive: 300..Connection: keep-alive..Referer:
http://prov.xiptel.ne
t/dir1/..Cookie: logintheme=cpanel; cprelogin=no;
cpsession=closed..Authorization:
Basic ZGlyMTppcGd2MTMxNA==....
As you can see, the server responds asking for authorization
credentials, which are not responded to by the Polycom in its next
HTTP message, whereas with a browser, when I type in my username and
password in the dialog box, a response is made.
I have been assured by Polycom that basic authentication works with
their new models of phones - I am using a ip320. Further their admin
guide states:
"The protocol that will be used to transfer files from the boot server
depends on
several factors including the phone model and whether the bootROM or
|
SIP
| Quote: | application stage of provisioning is in progress. By default, the
|
phones
| Quote: | are
shipped with FTP enabled as the provisioning protocol. If an
|
unsupported
| Quote: | protocol is specified, this may result in a defined behavior (see the
table below
for details of which protocol the phone will use). The Specified
|
Protocol
| Quote: | listed
in the table can be selected in the Server Type field or the Server
Address can
include a transfer protocol, for example http://usr:pwd at server (refer
|
to
| Quote: | Server Menu on page 3-9). The boot server address can be an IP
|
address,
| Quote: | domain string name, or URL. The boot server address can also be
|
obtained
| Quote: | through DHCP. Configuration file names in the <Ethernet address>.cfg
|
file
| Quote: | can include a transfer protocol, for example
https://usr:pwd at server/dir/file.cfg. If a user name and password are
specified as part of the server address or file name, they will be
used only if the
server supports them."
Anyone familiar with this situation, or have a different Option 66
string? or any troubleshooting tips
Thanks
Robert
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
|
| Back to top |
|
|
asteriskator at gmail.com
Guest
|
| Posted: Fri Jun 27, 2008 2:37 pm Post subject: [asterisk-users] polycom with http/https basic authenticatio |
|
|
We use FTP just now, and it works ok. Ultimately I want to use HTTPS
as we are sending config files over the internet, which have access
credentials on how to register a phone, which is potentially damaging
- most people deploy on a LAN, but we have a central provisioning
server. Polycom are fairly flakey when it comes to mention FTPS -
they say it isnt officially supported, and does not seem to be
something many people are doing.
Plus it seems industry standard just now is to use HTTP/s - snom and
linksys both use HTTP, and not FTP (which seems fairly unique to
polycom), so it would be better to use the same protocol for all makes
of telephone - especially as you can only put one string in Option 66
in a customers router.
I have a ticket open with Polycom regarding just now - it seems to
work now when you provision by hand by typing in values in the bootrom
using HTTP with basic authentication.
R
On Fri, Jun 27, 2008 at 11:07 AM, Alexander Lopez <Alex.Lopez at opsys.com> wrote:
| Quote: | I could never get the http stuff to work, I tried Ftp like what you have
ftp://user:password at server/customomer
It worked fine for me the first time, and I just ran with it. Has worked
without an issue since day one. If FTP not an option for you????
Alex
| Quote: | -----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
bounces at lists.digium.com] On Behalf Of Robert McNaught
Sent: Friday, June 27, 2008 1:20 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] polycom with http/https basic authentication
Hi,
I apologize that this is not directly associated with Asterisk, I have
been trying to solve this, but not having any luck.
Does anyone have a setup with http or https with basic authentication
for provisioning Polycom Phones. We use edgemarc 4500 routers and use
Option 66 to auto-provision phones using DHCP. I am trying to set up
an apache server with subdirectories for different customers protected
by a username and password so that their phones can only access their
own directory.
The string I am putting in Option 66 is:
"http://username:password at http.server.com/dir1/"
This is packet dumps of the polycom phone trying to grab files from
the server - using basic authentication - I have set up .htaccess
files which work correctly when pulling down files using firefox.
GET FILE WITH POLYCOM
[root at server3 ~]# ngrep -q 'HTTP/1.[01]'
interface: eth0 (XXX.XXX.XXX.XXX/255.255.254.0)
match: HTTP/1.[01]
T XXX.XXX.XXX.XXX:1024 -> XXX.XXX.XXX.XXX [AP]
GET /dir1/2345-12200-002.bootrom.ld HTTP/1.1..Host:
http.server.com..Accept: */*..U
ser-Agent: FileTransport
|
PolycomSoundPointIP-SPIP_320-UA/4.0.0.0423....
| Quote: |
T XXX.XXX.XXX.XXX:80 -> XXX.XXX.XXX.XXX:1024 [AP]
HTTP/1.1 401 Authorization Required..Date: Fri, 27 Jun 2008 16:46:59
GMT..Server: A
pache/2.0.61 (Unix) mod_ssl/2.0.61 OpenSSL/0.9.8b
mod_auth_passthrough/2.1 mod_bwli
mited/1.4 FrontPage/5.0.2.2635 PHP/5.2.5..WWW-Authenticate: Basic
realm="Restricted
Area"..Content-Length: 703..Content-Type: text/html;
charset=iso-8859-1....<!DOCTY
PE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">.<html><head>.<title>401
Authorization R
equired</title>.</head><body>.<h1>Authorization
Required</h1>.<p>This server could
not verify that you.are authorized to access the document.requested.
Either you su
pplied the wrong.credentials (e.g., bad password), or your.browser
doesn't understa
nd how to supply.the credentials required.</p>.<p>Additionally, a
404 Not Found.err
or was encountered while trying to use an ErrorDocument to handle
the request.</p>.
<hr>.<address>Apache/2.0.61 (Unix) mod_ssl/2.0.61 OpenSSL/0.9.8b
mod_auth_passthrou
gh/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 PHP/5.2.5 Server at
prov.xiptel.net P
ort 80</address>.</body></html>.
T XXX.XXX.XXX.XXX:1025 -> XXX.XXX.XXX.XXX:80 [AP]
GET /dir1/bootrom.ld HTTP/1.1..Host: http.server.com..Accept:
*/*..User-Agent: File
Transport PolycomSoundPointIP-SPIP_320-UA/4.0.0.0423....
USING FIREFOX
[root at server3 ~]# ngrep -q 'HTTP/1.[01]'
interface: eth0 (69.73.146.0/255.255.254.0)
match: HTTP/1.[01]
T XXX.XXX.XXX.XXX:57773 -> XXX.XXX.XXX.XXX:80 [AP]
GET /dir1/2345-11300-010.bootrom.ld HTTP/1.1..Host:
http.server.com..User-Agent: Mo
zilla/5.0 (X11; U; Linux i686; en-US; rv:1.9) Gecko/2008061015
Firefox/3.0..Accept:
|
text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8..Accept-
| Quote: | Language:
en-us,en;q=0.5..Accept-Encoding: gzip,deflate..Accept-Charset:
ISO-8859-1,utf-8;q=0
.7,*;q=0.7..Keep-Alive: 300..Connection: keep-alive..Referer:
http://prov.xiptel.ne
t/dir1/..Cookie: logintheme=cpanel; cprelogin=no;
|
cpsession=closed....
| Quote: |
T XXX.XXX.XXX.XXX:80 -> XXX.XXX.XXX.XXX:57773 [AP]
HTTP/1.1 401 Authorization Required..Date: Fri, 27 Jun 2008 16:36:20
GMT..Server: A
pache/2.0.61 (Unix) mod_ssl/2.0.61 OpenSSL/0.9.8b
mod_auth_passthrough/2.1 mod_bwli
mited/1.4 FrontPage/5.0.2.2635 PHP/5.2.5..WWW-Authenticate: Basic
realm="Restricted
Area"..Content-Length: 703..Keep-Alive: timeout=15,
max=100..Connection: Keep-Aliv
e..Content-Type: text/html; charset=iso-8859-1....<!DOCTYPE HTML
PUBLIC "-//IETF//D
TD HTML 2.0//EN">.<html><head>.<title>401 Authorization
Required</title>.</head><bo
dy>.<h1>Authorization Required</h1>.<p>This server could not verify
that you.are au
thorized to access the document.requested. Either you supplied the
wrong.credentia
ls (e.g., bad password), or your.browser doesn't understand how to
supply.the crede
ntials required.</p>.<p>Additionally, a 404 Not Found.error was
encountered while t
rying to use an ErrorDocument to handle the
request.</p>.<hr>.<address>Apache/2.0.6
1 (Unix) mod_ssl/2.0.61 OpenSSL/0.9.8b mod_auth_passthrough/2.1
mod_bwlimited/1.4 F
rontPage/5.0.2.2635 PHP/5.2.5 Server at prov.xiptel.net Port
80</address>.</body></
html>.
T XXX.XXX.XXX.XXX:57773 -> XXX.XXX.XXX.XXX:80 [AP]
GET /dir1/2345-11300-010.bootrom.ld HTTP/1.1..Host:
http.server.com..User-Agent: Mo
zilla/5.0 (X11; U; Linux i686; en-US; rv:1.9) Gecko/2008061015
Firefox/3.0..Accept:
|
text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8..Accept-
| Quote: | Language:
en-us,en;q=0.5..Accept-Encoding: gzip,deflate..Accept-Charset:
ISO-8859-1,utf-8;q=0
.7,*;q=0.7..Keep-Alive: 300..Connection: keep-alive..Referer:
http://prov.xiptel.ne
t/dir1/..Cookie: logintheme=cpanel; cprelogin=no;
cpsession=closed..Authorization:
Basic ZGlyMTppcGd2MTMxNA==....
As you can see, the server responds asking for authorization
credentials, which are not responded to by the Polycom in its next
HTTP message, whereas with a browser, when I type in my username and
password in the dialog box, a response is made.
I have been assured by Polycom that basic authentication works with
their new models of phones - I am using a ip320. Further their admin
guide states:
"The protocol that will be used to transfer files from the boot server
depends on
several factors including the phone model and whether the bootROM or
|
SIP
| Quote: | application stage of provisioning is in progress. By default, the
|
phones
| Quote: | are
shipped with FTP enabled as the provisioning protocol. If an
|
unsupported
| Quote: | protocol is specified, this may result in a defined behavior (see the
table below
for details of which protocol the phone will use). The Specified
|
Protocol
| Quote: | listed
in the table can be selected in the Server Type field or the Server
Address can
include a transfer protocol, for example http://usr:pwd at server (refer
|
to
| Quote: | Server Menu on page 3-9). The boot server address can be an IP
|
address,
| Quote: | domain string name, or URL. The boot server address can also be
|
obtained
| Quote: | through DHCP. Configuration file names in the <Ethernet address>.cfg
|
file
| Quote: | can include a transfer protocol, for example
https://usr:pwd at server/dir/file.cfg. If a user name and password are
specified as part of the server address or file name, they will be
used only if the
server supports them."
Anyone familiar with this situation, or have a different Option 66
string? or any troubleshooting tips
Thanks
Robert
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
