VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
asterisk-users at pc-h...
Guest
|
 Posted: Thu Jun 26, 2008 4:56 am Post subject: [asterisk-users] Outbound video Calls |
 |
|
Hi all,
I am trying to make an outbound video call to a mobile from asterisk.
however it keeps failing.
I can make inbound calls from a mobile and view video.
I am using x-lite to initiate the outbound call, however I have tried using
the management interface as well (action: etc...) and result is the same.
normal voice outbound calls work fine.
Circuit is a q931 30 channel from telewest (virgin media).
Any pointers would be appreciated.
below is pri debug output and relevant conf entries.
// BEGIN //
-- Executing [666 at sip_in:1] Goto("SIP/paul-081ff260",
"video_test_out|666|1") in new stack
-- Goto (video_test_out,666,1)
-- Executing [666 at video_test_out:1] Set("SIP/paul-081ff260",
"CHANNEL(transfercapability)=VIDEO") in new stack
-- Executing [666 at video_test_out:2] Set("SIP/paul-081ff260",
"CHANNEL(userinformationlayer1)=38") in new stack
-- Executing [666 at video_test_out:3] h324m_gw("SIP/paul-081ff260",
"s at video_test_out_context") in new stack
[Jun 26 09:21:46] WARNING[7881]: channel.c:700 ast_best_codec: Don't know
any of 0x2000 formats
-- Executing [s at video_test_out_context:1]
h324m_call("Local/s at video_test_out_context-f51e,2",
"dialcell at video_test_out_context") in new stack
-- Executing [dialcell at video_test_out_context:1]
Set("Local/dialcell at video_test_out_context-de13,2",
"CHANNEL(transfercapability)=VIDEO") in new stack
-- Executing [dialcell at video_test_out_context:2]
NoOp("Local/dialcell at video_test_out_context-de13,2", "transfer=VIDEO") in
new stack
-- Executing [dialcell at video_test_out_context:3]
Set("Local/dialcell at video_test_out_context-de13,2",
"CHANNEL(userinformationlayer1)=38") in new stack
-- Executing [dialcell at video_test_out_context:4]
NoOp("Local/dialcell at video_test_out_context-de13,2", "ul1=38") in new stack
-- Executing [dialcell at video_test_out_context:5]
Dial("Local/dialcell at video_test_out_context-de13,2",
"Zap/g0/07525029025|40|tTkK") in new stack
-- Making new call for cr 32771
-- digital call, setting user information layer 1 to 38 (0x26)
-- Requested transfer capability: 0x18 - VIDEO
| Quote: | Protocol Discriminator: Q.931 ( len=38
|
| Quote: | Call Ref: len= 2 (reference 3/0x3) (Originator)
|
| Quote: | Message type: SETUP (5)
|
| Quote: | Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Unrestricted digital information (
|
| Quote: | Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)
|
| Quote: | Ext: 1 User information layer 1: H.223 and
H.245 (3
|
| Quote: | Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive
Dchan: 0
|
| Quote: | Ext: 1 Coding: 0 Number Specified Channel Type: 3
|
| Quote: | Ext: 1 Channel: 1 ]
|
| Quote: | [6c 06 41 80 70 61 75 6c]
|
| Quote: | Calling Number (len= [ Ext: 0 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
|
| Quote: | Presentation: Presentation permitted, user
number not screened (0) 'paul' ]
|
| Quote: | [70 0c c1 30 37 35 32 35 30 32 39 30 32 35]
|
| Quote: | Called Number (len=14) [ Ext: 1 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '07525029025' ]
|
| Quote: | Sending Complete (len= 1)
|
q931.c:2881 q931_setup: call 32771 on channel 1 enters state 1 (Call
Initiated)
-- Called g0/07525029025
< Protocol Discriminator: Q.931 ( len=10
< Call Ref: len= 2 (reference 3/0x3) (Terminator)
< Message type: RELEASE COMPLETE (90)
< [08 03 80 e4 04]
< Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: User (0)
< Ext: 1 Cause: Invalid information element contents
(100), class = Protocol Error (e.g. unknown message) (6) ]
< Cause data 1: 04 (4)
-- Processing IE 8 (cs0, Cause)
q931.c:3503 q931_receive: call 32771 on channel 1 enters state 0 (Null)
-- Channel 0/1, span 1 got hangup, cause 100
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
-- Hungup 'Zap/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [dialcell at video_test_out_context:6]
Hangup("Local/dialcell at video_test_out_context-de13,2", "") in new stack
== Spawn extension (video_test_out_context, dialcell, 6) exited non-zero
on 'Local/dialcell at video_test_out_context-de13,2'
== Auto fallthrough, channel 'Local/s at video_test_out_context-f51e,2'
status is 'UNKNOWN'
== Spawn extension (video_test_out, 666, 3) exited non-zero on
'SIP/paul-081ff260'
// END //
extensions.conf:
[video_test_out]
exten => 666,1,Set(CHANNEL(transfercapability)=VIDEO)
exten => 666,n,Set(CHANNEL(userinformationlayer1)=3
exten => 666,n,h324m_gw(s at video_test_out_context)
exten => 666,n,Hangup
[video_test_out_context]
exten => s,1,h324m_call(dialcell at video_test_out_context)
exten => dialcell,1,Set(CHANNEL(transfercapability)=VIDEO)
exten => dialcell,n,NoOp(transfer=${CHANNEL(transfercapability)})
exten => dialcell,n,Set(CHANNEL(userinformationlayer1)=3
exten => dialcell,n,NoOp(ul1=${CHANNEL(userinformationlayer1)})
exten => dialcell,n,Dial(Zap/g0/07xxxxxxxxx,40,tTkK)
exten => dialcell,n,Hangup()
exten => t,1,Goto(s,2)
sip.conf:
[general]
context=sip_in
allowoverlap=no
bindport=5060
bindaddr=0.0.0.0
videosupport=yes
disable=all
allow=ulaw
allow=alaw
allow=h263+
;allow=h263
;allow=h263p
allow=speex
allow=gsm
#include "/etc/pbx-tandil/sip.conf"
#include "/etc/asterisk/sip_dps.conf"
[paul]
type=friend
username=paul
secret=georgina
nat=never
host=dynamic
canreinvite=no
allow=h263p
--
Paul Verity |
|
| Back to top |
|
 |
klaus.mailinglists at ...
Guest
|
| Posted: Thu Jun 26, 2008 6:18 am Post subject: [asterisk-users] Outbound video Calls |
|
|
You could try to use libpri-1.4.7.1-llc-transmit-receive-patch.txt from
http://bugs.digium.com/view.php?id=11595 to signal H324M in LLC IE too.
Maybe the switch wants to have it in Bearer Capability and LCC (I once
had such a switch).
Another reason could be that the telco blocks video calls.
regards
klaus
PS: use the asterisk-video mailing lists
Asterisk Users schrieb:
| Quote: | Hi all,
I am trying to make an outbound video call to a mobile from asterisk.
however it keeps failing.
I can make inbound calls from a mobile and view video.
I am using x-lite to initiate the outbound call, however I have tried using
the management interface as well (action: etc...) and result is the same.
normal voice outbound calls work fine.
Circuit is a q931 30 channel from telewest (virgin media).
Any pointers would be appreciated.
below is pri debug output and relevant conf entries.
// BEGIN //
-- Executing [666 at sip_in:1] Goto("SIP/paul-081ff260",
"video_test_out|666|1") in new stack
-- Goto (video_test_out,666,1)
-- Executing [666 at video_test_out:1] Set("SIP/paul-081ff260",
"CHANNEL(transfercapability)=VIDEO") in new stack
-- Executing [666 at video_test_out:2] Set("SIP/paul-081ff260",
"CHANNEL(userinformationlayer1)=38") in new stack
-- Executing [666 at video_test_out:3] h324m_gw("SIP/paul-081ff260",
"s at video_test_out_context") in new stack
[Jun 26 09:21:46] WARNING[7881]: channel.c:700 ast_best_codec: Don't know
any of 0x2000 formats
-- Executing [s at video_test_out_context:1]
h324m_call("Local/s at video_test_out_context-f51e,2",
"dialcell at video_test_out_context") in new stack
-- Executing [dialcell at video_test_out_context:1]
Set("Local/dialcell at video_test_out_context-de13,2",
"CHANNEL(transfercapability)=VIDEO") in new stack
-- Executing [dialcell at video_test_out_context:2]
NoOp("Local/dialcell at video_test_out_context-de13,2", "transfer=VIDEO") in
new stack
-- Executing [dialcell at video_test_out_context:3]
Set("Local/dialcell at video_test_out_context-de13,2",
"CHANNEL(userinformationlayer1)=38") in new stack
-- Executing [dialcell at video_test_out_context:4]
NoOp("Local/dialcell at video_test_out_context-de13,2", "ul1=38") in new stack
-- Executing [dialcell at video_test_out_context:5]
Dial("Local/dialcell at video_test_out_context-de13,2",
"Zap/g0/07525029025|40|tTkK") in new stack
-- Making new call for cr 32771
-- digital call, setting user information layer 1 to 38 (0x26)
-- Requested transfer capability: 0x18 - VIDEO
| Quote: | Protocol Discriminator: Q.931 ( len=38
|
| Quote: | Call Ref: len= 2 (reference 3/0x3) (Originator)
|
| Quote: | Message type: SETUP (5)
|
| Quote: | Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Unrestricted digital information (
|
| Quote: | Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)
|
| Quote: | Ext: 1 User information layer 1: H.223 and
H.245 (3
|
| Quote: | Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive
Dchan: 0
|
| Quote: | Ext: 1 Coding: 0 Number Specified Channel Type: 3
|
| Quote: | Ext: 1 Channel: 1 ]
|
| Quote: | [6c 06 41 80 70 61 75 6c]
|
| Quote: | Calling Number (len= [ Ext: 0 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
|
| Quote: | Presentation: Presentation permitted, user
number not screened (0) 'paul' ]
|
| Quote: | [70 0c c1 30 37 35 32 35 30 32 39 30 32 35]
|
| Quote: | Called Number (len=14) [ Ext: 1 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '07525029025' ]
|
| Quote: | Sending Complete (len= 1)
|
q931.c:2881 q931_setup: call 32771 on channel 1 enters state 1 (Call
Initiated)
-- Called g0/07525029025
< Protocol Discriminator: Q.931 ( len=10
< Call Ref: len= 2 (reference 3/0x3) (Terminator)
< Message type: RELEASE COMPLETE (90)
< [08 03 80 e4 04]
< Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: User (0)
< Ext: 1 Cause: Invalid information element contents
(100), class = Protocol Error (e.g. unknown message) (6) ]
< Cause data 1: 04 (4)
-- Processing IE 8 (cs0, Cause)
q931.c:3503 q931_receive: call 32771 on channel 1 enters state 0 (Null)
-- Channel 0/1, span 1 got hangup, cause 100
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
-- Hungup 'Zap/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [dialcell at video_test_out_context:6]
Hangup("Local/dialcell at video_test_out_context-de13,2", "") in new stack
== Spawn extension (video_test_out_context, dialcell, 6) exited non-zero
on 'Local/dialcell at video_test_out_context-de13,2'
== Auto fallthrough, channel 'Local/s at video_test_out_context-f51e,2'
status is 'UNKNOWN'
== Spawn extension (video_test_out, 666, 3) exited non-zero on
'SIP/paul-081ff260'
// END //
extensions.conf:
[video_test_out]
exten => 666,1,Set(CHANNEL(transfercapability)=VIDEO)
exten => 666,n,Set(CHANNEL(userinformationlayer1)=3
exten => 666,n,h324m_gw(s at video_test_out_context)
exten => 666,n,Hangup
[video_test_out_context]
exten => s,1,h324m_call(dialcell at video_test_out_context)
exten => dialcell,1,Set(CHANNEL(transfercapability)=VIDEO)
exten => dialcell,n,NoOp(transfer=${CHANNEL(transfercapability)})
exten => dialcell,n,Set(CHANNEL(userinformationlayer1)=3
exten => dialcell,n,NoOp(ul1=${CHANNEL(userinformationlayer1)})
exten => dialcell,n,Dial(Zap/g0/07xxxxxxxxx,40,tTkK)
exten => dialcell,n,Hangup()
exten => t,1,Goto(s,2)
sip.conf:
[general]
context=sip_in
allowoverlap=no
bindport=5060
bindaddr=0.0.0.0
videosupport=yes
disable=all
allow=ulaw
allow=alaw
allow=h263+
;allow=h263
;allow=h263p
allow=speex
allow=gsm
#include "/etc/pbx-tandil/sip.conf"
#include "/etc/asterisk/sip_dps.conf"
[paul]
type=friend
username=paul
secret=georgina
nat=never
host=dynamic
canreinvite=no
allow=h263p
--
Paul Verity
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
