Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[Freeswitch-users] Openzap FXS Ports keep hanging up!


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> freeSWITCH Users
View previous topic :: View next topic  
Author Message
faraz.khan at emergen.biz
Guest
PostPosted: Sun Sep 14, 2008 1:05 pm    Post subject: [Freeswitch-users] Openzap FXS Ports keep hanging up! Reply with quote
I have a Digium TDM400p and im using Zaptel 1.4.12.1. My problem is that
calls between FXS channels get hung up almost immediately. I dont seem
to understand why.It does not look like a freeswitch issue, maybe a
openzap problem- maybe its using some sort of tone detection? Any help
would be appreciated. Relevant lines from the logs are:

2008-09-14 22:57:04 [DEBUG] ozmod_analog.c:388 zap_analog_channel_run()
Executing state handler on 2:1 for RING
2008-09-14 22:57:12 [DEBUG] ozmod_analog.c:713 process_event() EVENT
[OFFHOOK][3:1] STATE [GENRING]
2008-09-14 22:57:12 [DEBUG] ozmod_analog.c:776 process_event() Changing
state on 3:1 from GENRING to UP
2008-09-14 22:57:12 [DEBUG] ozmod_analog.c:388 zap_analog_channel_run()
Executing state handler on 3:1 for UP
2008-09-14 22:57:12 [DEBUG] mod_openzap.c:1147 on_fxs_signal() got FXS
sig [UP]
2008-09-14 22:57:12 [DEBUG] switch_channel.c:1560
switch_channel_perform_mark_answered() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [NOTICE] mod_openzap.c:1155 on_fxs_signal() Channel
[OpenZAP/3:1/3/1] has been answered
2008-09-14 22:57:12 [WARNING] mod_openzap.c:786
channel_receive_message_fxs() VETO Changing state on 2:1 from RING to UP
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:435
switch_core_session_receive_message() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [NOTICE] switch_ivr_originate.c:1342
switch_ivr_originate() Channel [OpenZAP/2:1/3] has been answered
2008-09-14 22:57:12 [DEBUG] switch_ivr_originate.c:1380
switch_ivr_originate() Originate Resulted in Success: [OpenZAP/3:1/3/1]
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:435
switch_core_session_receive_message() Kill OpenZAP/3:1/3/1 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:435
switch_core_session_receive_message() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:845
switch_ivr_multi_threaded_bridge() OpenZAP/3:1/3/1 State Change
CS_CONSUME_MEDIA -> CS_EXCHANGE_MEDIA
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:727
switch_core_session_signal_state_change() Kill OpenZAP/3:1/3/1 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:442
switch_core_session_run() (OpenZAP/3:1/3/1) State CONSUME_MEDIA going to
sleep
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:365
switch_core_session_run() OpenZAP/3:1/3/1 Running State Change
CS_EXCHANGE_MEDIA
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:433
switch_core_session_run() (OpenZAP/3:1/3/1) State EXCHANGE_MEDIA
2008-09-14 22:57:12 [DEBUG] mod_openzap.c:503
channel_on_exchange_media() CHANNEL EXCHANGE_MEDIA
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:337
audio_bridge_thread() OpenZAP/2:1/3 ending bridge by request from read
function
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:435
switch_core_session_receive_message() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:410
audio_bridge_thread() Kill OpenZAP/3:1/3/1 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:413
audio_bridge_thread() BRIDGE THREAD DONE [OpenZAP/2:1/3]
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:851
switch_ivr_multi_threaded_bridge() OpenZAP/3:1/3/1 State Change
CS_EXCHANGE_MEDIA -> CS_RESET
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:727
switch_core_session_signal_state_change() Kill OpenZAP/3:1/3/1 [BREAK]
2008-09-14 22:57:12 [NOTICE] switch_core_state_machine.c:157
switch_core_standard_on_execute() Hangup OpenZAP/2:1/3 [CS_EXECUTE]
[NORMAL_CLEARING]
2008-09-14 22:57:12 [DEBUG] switch_channel.c:1381
switch_channel_perform_hangup() Kill OpenZAP/2:1/3 [KILL]
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:727
switch_core_session_signal_state_change() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:430
switch_core_session_run() (OpenZAP/2:1/3) State EXECUTE going to sleep
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:365
switch_core_session_run() OpenZAP/2:1/3 Running State Change CS_HANGUP
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:393
switch_core_session_run() (OpenZAP/2:1/3) State HANGUP
2008-09-14 22:57:12 [DEBUG] mod_openzap.c:432 channel_on_hangup()
Changing state on 2:1 from RING to HANGUP
2008-09-14 22:57:12 [DEBUG] mod_openzap.c:465 channel_on_hangup()
OpenZAP/2:1/3 CHANNEL HANGUP
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:46
switch_core_standard_on_hangup() Standard HANGUP OpenZAP/2:1/3, cause:
NORMAL_CLEARING
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:393
switch_core_session_run() (OpenZAP/2:1/3) State HANGUP going to sleep
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:794
switch_core_session_thread() Session 1 (OpenZAP/2:1/3) Locked, Waiting
on external entities
2008-09-14 22:57:12 [DEBUG] ozmod_analog.c:388 zap_analog_channel_run()
Executing state handler on 2:1 for HANGUP


zaptel.conf says:

fxoks = 1,3-4
fxsks = 2

my openzap.conf and openzap.conf.xml are straight from the wiki example.





--
Faraz R Khan
Cheif Architect
Emergen Consulting
+92.21.529.0381 x200
www.emergen.biz

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
anthony.minessale at g...
Guest
PostPosted: Sun Sep 14, 2008 6:35 pm    Post subject: [Freeswitch-users] Openzap FXS Ports keep hanging up! Reply with quote
try latest trunk

On Sun, Sep 14, 2008 at 1:02 PM, faraz khan <faraz.khan@emergen.biz (faraz.khan@emergen.biz)> wrote:
Quote:
I have a Digium TDM400p and im using Zaptel 1.4.12.1. My problem is that
calls between FXS channels get hung up almost immediately. I dont seem
to understand why.It does not look like a freeswitch issue, maybe a
openzap problem- maybe its using some sort of tone detection? Any help
would be appreciated. Relevant lines from the logs are:

2008-09-14 22:57:04 [DEBUG] ozmod_analog.c:388 zap_analog_channel_run()
Executing state handler on 2:1 for RING
2008-09-14 22:57:12 [DEBUG] ozmod_analog.c:713 process_event() EVENT
[OFFHOOK][3:1] STATE [GENRING]
2008-09-14 22:57:12 [DEBUG] ozmod_analog.c:776 process_event() Changing
state on 3:1 from GENRING to UP
2008-09-14 22:57:12 [DEBUG] ozmod_analog.c:388 zap_analog_channel_run()
Executing state handler on 3:1 for UP
2008-09-14 22:57:12 [DEBUG] mod_openzap.c:1147 on_fxs_signal() got FXS
sig [UP]
2008-09-14 22:57:12 [DEBUG] switch_channel.c:1560
switch_channel_perform_mark_answered() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [NOTICE] mod_openzap.c:1155 on_fxs_signal() Channel
[OpenZAP/3:1/3/1] has been answered
2008-09-14 22:57:12 [WARNING] mod_openzap.c:786
channel_receive_message_fxs() VETO Changing state on 2:1 from RING to UP
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:435
switch_core_session_receive_message() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [NOTICE] switch_ivr_originate.c:1342
switch_ivr_originate() Channel [OpenZAP/2:1/3] has been answered
2008-09-14 22:57:12 [DEBUG] switch_ivr_originate.c:1380
switch_ivr_originate() Originate Resulted in Success: [OpenZAP/3:1/3/1]
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:435
switch_core_session_receive_message() Kill OpenZAP/3:1/3/1 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:435
switch_core_session_receive_message() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:845
switch_ivr_multi_threaded_bridge() OpenZAP/3:1/3/1 State Change
CS_CONSUME_MEDIA -> CS_EXCHANGE_MEDIA
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:727
switch_core_session_signal_state_change() Kill OpenZAP/3:1/3/1 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:442
switch_core_session_run() (OpenZAP/3:1/3/1) State CONSUME_MEDIA going to
sleep
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:365
switch_core_session_run() OpenZAP/3:1/3/1 Running State Change
CS_EXCHANGE_MEDIA
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:433
switch_core_session_run() (OpenZAP/3:1/3/1) State EXCHANGE_MEDIA
2008-09-14 22:57:12 [DEBUG] mod_openzap.c:503
channel_on_exchange_media() CHANNEL EXCHANGE_MEDIA
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:337
audio_bridge_thread() OpenZAP/2:1/3 ending bridge by request from read
function
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:435
switch_core_session_receive_message() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:410
audio_bridge_thread() Kill OpenZAP/3:1/3/1 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:413
audio_bridge_thread() BRIDGE THREAD DONE [OpenZAP/2:1/3]
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:851
switch_ivr_multi_threaded_bridge() OpenZAP/3:1/3/1 State Change
CS_EXCHANGE_MEDIA -> CS_RESET
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:727
switch_core_session_signal_state_change() Kill OpenZAP/3:1/3/1 [BREAK]
2008-09-14 22:57:12 [NOTICE] switch_core_state_machine.c:157
switch_core_standard_on_execute() Hangup OpenZAP/2:1/3 [CS_EXECUTE]
[NORMAL_CLEARING]
2008-09-14 22:57:12 [DEBUG] switch_channel.c:1381
switch_channel_perform_hangup() Kill OpenZAP/2:1/3 [KILL]
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:727
switch_core_session_signal_state_change() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:430
switch_core_session_run() (OpenZAP/2:1/3) State EXECUTE going to sleep
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:365
switch_core_session_run() OpenZAP/2:1/3 Running State Change CS_HANGUP
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:393
switch_core_session_run() (OpenZAP/2:1/3) State HANGUP
2008-09-14 22:57:12 [DEBUG] mod_openzap.c:432 channel_on_hangup()
Changing state on 2:1 from RING to HANGUP
2008-09-14 22:57:12 [DEBUG] mod_openzap.c:465 channel_on_hangup()
OpenZAP/2:1/3 CHANNEL HANGUP
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:46
switch_core_standard_on_hangup() Standard HANGUP OpenZAP/2:1/3, cause:
NORMAL_CLEARING
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:393
switch_core_session_run() (OpenZAP/2:1/3) State HANGUP going to sleep
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:794
switch_core_session_thread() Session 1 (OpenZAP/2:1/3) Locked, Waiting
on external entities
2008-09-14 22:57:12 [DEBUG] ozmod_analog.c:388 zap_analog_channel_run()
Executing state handler on 2:1 for HANGUP


zaptel.conf says:

fxoks = 1,3-4
fxsks = 2

my openzap.conf and openzap.conf.xml are straight from the wiki example.





--
Faraz R Khan
Cheif Architect
Emergen Consulting
+92.21.529.0381 x200
www.emergen.biz

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



--
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/

AIM: anthm
MSN:anthony_minessale@hotmail.com ([email]MSN%3Aanthony_minessale@hotmail.com[/email])
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com ([email]PAYPAL%3Aanthony.minessale@gmail.com[/email])
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888@conference.freeswitch.org ([email]sip%3A888@conference.freeswitch.org[/email])
iax:guest@conference.freeswitch.org/888
googletalk:conf+888@conference.freeswitch.org ([email]googletalk%3Aconf%2B888@conference.freeswitch.org[/email])
pstn:213-799-1400
Back to top
faraz.khan at emergen.biz
Guest
PostPosted: Mon Sep 15, 2008 1:35 am    Post subject: [Freeswitch-users] Openzap FXS Ports keep hanging up! Reply with quote
I am. Sorry forgot to mentioned that. Latest trunk as of two days ago,
that is.

Anthony Minessale wrote:
Quote:
try latest trunk

On Sun, Sep 14, 2008 at 1:02 PM, faraz khan <faraz.khan@emergen.biz
<mailto:faraz.khan@emergen.biz>> wrote:

I have a Digium TDM400p and im using Zaptel 1.4.12.1
<http://1.4.12.1>. My problem is that
calls between FXS channels get hung up almost immediately. I dont seem
to understand why.It does not look like a freeswitch issue, maybe a
openzap problem- maybe its using some sort of tone detection? Any help
would be appreciated. Relevant lines from the logs are:

2008-09-14 22:57:04 [DEBUG] ozmod_analog.c:388 zap_analog_channel_run()
Executing state handler on 2:1 for RING
2008-09-14 22:57:12 [DEBUG] ozmod_analog.c:713 process_event() EVENT
[OFFHOOK][3:1] STATE [GENRING]
2008-09-14 22:57:12 [DEBUG] ozmod_analog.c:776 process_event() Changing
state on 3:1 from GENRING to UP
2008-09-14 22:57:12 [DEBUG] ozmod_analog.c:388 zap_analog_channel_run()
Executing state handler on 3:1 for UP
2008-09-14 22:57:12 [DEBUG] mod_openzap.c:1147 on_fxs_signal() got FXS
sig [UP]
2008-09-14 22:57:12 [DEBUG] switch_channel.c:1560
switch_channel_perform_mark_answered() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [NOTICE] mod_openzap.c:1155 on_fxs_signal() Channel
[OpenZAP/3:1/3/1] has been answered
2008-09-14 22:57:12 [WARNING] mod_openzap.c:786
channel_receive_message_fxs() VETO Changing state on 2:1 from RING to UP
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:435
switch_core_session_receive_message() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [NOTICE] switch_ivr_originate.c:1342
switch_ivr_originate() Channel [OpenZAP/2:1/3] has been answered
2008-09-14 22:57:12 [DEBUG] switch_ivr_originate.c:1380
switch_ivr_originate() Originate Resulted in Success: [OpenZAP/3:1/3/1]
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:435
switch_core_session_receive_message() Kill OpenZAP/3:1/3/1 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:435
switch_core_session_receive_message() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:845
switch_ivr_multi_threaded_bridge() OpenZAP/3:1/3/1 State Change
CS_CONSUME_MEDIA -> CS_EXCHANGE_MEDIA
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:727
switch_core_session_signal_state_change() Kill OpenZAP/3:1/3/1 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:442
switch_core_session_run() (OpenZAP/3:1/3/1) State CONSUME_MEDIA going to
sleep
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:365
switch_core_session_run() OpenZAP/3:1/3/1 Running State Change
CS_EXCHANGE_MEDIA
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:433
switch_core_session_run() (OpenZAP/3:1/3/1) State EXCHANGE_MEDIA
2008-09-14 22:57:12 [DEBUG] mod_openzap.c:503
channel_on_exchange_media() CHANNEL EXCHANGE_MEDIA
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:337
audio_bridge_thread() OpenZAP/2:1/3 ending bridge by request from read
function
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:435
switch_core_session_receive_message() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:410
audio_bridge_thread() Kill OpenZAP/3:1/3/1 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:413
audio_bridge_thread() BRIDGE THREAD DONE [OpenZAP/2:1/3]
2008-09-14 22:57:12 [DEBUG] switch_ivr_bridge.c:851
switch_ivr_multi_threaded_bridge() OpenZAP/3:1/3/1 State Change
CS_EXCHANGE_MEDIA -> CS_RESET
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:727
switch_core_session_signal_state_change() Kill OpenZAP/3:1/3/1 [BREAK]
2008-09-14 22:57:12 [NOTICE] switch_core_state_machine.c:157
switch_core_standard_on_execute() Hangup OpenZAP/2:1/3 [CS_EXECUTE]
[NORMAL_CLEARING]
2008-09-14 22:57:12 [DEBUG] switch_channel.c:1381
switch_channel_perform_hangup() Kill OpenZAP/2:1/3 [KILL]
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:727
switch_core_session_signal_state_change() Kill OpenZAP/2:1/3 [BREAK]
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:430
switch_core_session_run() (OpenZAP/2:1/3) State EXECUTE going to sleep
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:365
switch_core_session_run() OpenZAP/2:1/3 Running State Change CS_HANGUP
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:393
switch_core_session_run() (OpenZAP/2:1/3) State HANGUP
2008-09-14 22:57:12 [DEBUG] mod_openzap.c:432 channel_on_hangup()
Changing state on 2:1 from RING to HANGUP
2008-09-14 22:57:12 [DEBUG] mod_openzap.c:465 channel_on_hangup()
OpenZAP/2:1/3 CHANNEL HANGUP
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:46
switch_core_standard_on_hangup() Standard HANGUP OpenZAP/2:1/3, cause:
NORMAL_CLEARING
2008-09-14 22:57:12 [DEBUG] switch_core_state_machine.c:393
switch_core_session_run() (OpenZAP/2:1/3) State HANGUP going to sleep
2008-09-14 22:57:12 [DEBUG] switch_core_session.c:794
switch_core_session_thread() Session 1 (OpenZAP/2:1/3) Locked, Waiting
on external entities
2008-09-14 22:57:12 [DEBUG] ozmod_analog.c:388 zap_analog_channel_run()
Executing state handler on 2:1 for HANGUP


zaptel.conf says:

fxoks = 1,3-4
fxsks = 2

my openzap.conf and openzap.conf.xml are straight from the wiki example.





--
Faraz R Khan
Cheif Architect
Emergen Consulting
+92.21.529.0381 x200
www.emergen.biz <http://www.emergen.biz>

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
<mailto:Freeswitch-users@lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org




--
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/

AIM: anthm
MSN:anthony_minessale@hotmail.com
<mailto:MSN%3Aanthony_minessale@hotmail.com>
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com
<mailto:PAYPAL%3Aanthony.minessale@gmail.com>
IRC: irc.freenode.net <http://irc.freenode.net> #freeswitch

FreeSWITCH Developer Conference
sip:888@conference.freeswitch.org
<mailto:sip%3A888@conference.freeswitch.org>
iax:guest@conference.freeswitch.org/888
<http://iax:guest@conference.freeswitch.org/888>
googletalk:conf+888@conference.freeswitch.org
<mailto:googletalk%3Aconf%2B888@conference.freeswitch.org>
pstn:213-799-1400


------------------------------------------------------------------------

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

--
Faraz R Khan
Chief Architect
Emergen Consulting Pvt Ltd
+92.21.529.0381 x200
www.emergen.biz


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
mike at jerris.com
Guest
PostPosted: Mon Sep 15, 2008 1:55 am    Post subject: [Freeswitch-users] Openzap FXS Ports keep hanging up! Reply with quote
On Sep 15, 2008, at 2:33 AM, Faraz Khan wrote:

Quote:
I am. Sorry forgot to mentioned that. Latest trunk as of two days ago,
that is.

Anthony Minessale wrote:
Quote:
try latest trunk


He is saying to update and try again, he committed a possible fix and
wanted you to test it.

Mike


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
faraz.khan at emergen.biz
Guest
PostPosted: Mon Sep 15, 2008 3:39 am    Post subject: [Freeswitch-users] Openzap FXS Ports keep hanging up! Reply with quote
Will do. Thanks!

Michael Jerris wrote:
Quote:
On Sep 15, 2008, at 2:33 AM, Faraz Khan wrote:

Quote:
I am. Sorry forgot to mentioned that. Latest trunk as of two days ago,
that is.

Anthony Minessale wrote:
Quote:
try latest trunk


He is saying to update and try again, he committed a possible fix and
wanted you to test it.

Mike


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> freeSWITCH Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services