Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[Freeswitch-users] Core Dump


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> freeSWITCH Users
View previous topic :: View next topic  
Author Message
peder at networkoblivi...
Guest





PostPosted: Thu Dec 18, 2008 9:41 am    Post subject: [Freeswitch-users] Core Dump Reply with quote

What is the process for capturing and submitting a core dump?

I am messing around with the Cisco 79x1 phones and tcp and multiple reg.
I have a 7961 using tcp and a 7960 using udp both reg'd with the same
number and both showing up as registered. If I call out from the phone
using tcp, it works. If I call out from the phone using udp, I get a
core dump. If I call in, it calls both phones and I am assuming the
call to the phone using udp causes a core dump as well. These are the
only two phones on the system and I am running version 10851 from
yesterday. If I only have the udp phone registered and the tcp phone is
off, it works fine. It is only when I have a mix of a udp reg and a tcp
reg on the same number that I appear to get a core dump.


Peder

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
msc at freeswitch.org
Guest





PostPosted: Thu Dec 18, 2008 10:16 am    Post subject: [Freeswitch-users] Core Dump Reply with quote

Check out this page:
wiki.freeswitch.org/wiki/Debugging_Freeswitch

-MC

Sent from my iPhone

On Dec 18, 2008, at 6:38 AM, "peder@networkoblivion.com" <peder@networkoblivion.com
Quote:
wrote:

Quote:
What is the process for capturing and submitting a core dump?

I am messing around with the Cisco 79x1 phones and tcp and multiple
reg.
I have a 7961 using tcp and a 7960 using udp both reg'd with the same
number and both showing up as registered. If I call out from the
phone
using tcp, it works. If I call out from the phone using udp, I get a
core dump. If I call in, it calls both phones and I am assuming the
call to the phone using udp causes a core dump as well. These are the
only two phones on the system and I am running version 10851 from
yesterday. If I only have the udp phone registered and the tcp
phone is
off, it works fine. It is only when I have a mix of a udp reg and a
tcp
reg on the same number that I appear to get a core dump.


Peder

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
peder at networkoblivi...
Guest





PostPosted: Thu Dec 18, 2008 10:59 am    Post subject: [Freeswitch-users] Core Dump Reply with quote

If anybody wants to look at the core dump in gdb, here it is (the actual
core is 256Meg):

http://pastebin.freeswitch.org/6476

I know zip about debugging and gdb, but from looking through it, I see a
segmentation fault and it appears to be thread 15094. The last three
items in the bt full for that thread are:

destroy_status = <value optimized out>
fd = (switch_file_t *) 0x80529b0
pool = (switch_memory_pool_t *) 0x80528f0

So I would guess it is trying to access an invalid memory location, but
why, I have no idea....

Any ideas?


Peder


Michael S Collins wrote:
Quote:
Check out this page:
wiki.freeswitch.org/wiki/Debugging_Freeswitch

-MC

Sent from my iPhone

On Dec 18, 2008, at 6:38 AM, "peder@networkoblivion.com" <peder@networkoblivion.com
Quote:
wrote:

Quote:
What is the process for capturing and submitting a core dump?

I am messing around with the Cisco 79x1 phones and tcp and multiple
reg.
I have a 7961 using tcp and a 7960 using udp both reg'd with the same
number and both showing up as registered. If I call out from the
phone
using tcp, it works. If I call out from the phone using udp, I get a
core dump. If I call in, it calls both phones and I am assuming the
call to the phone using udp causes a core dump as well. These are the
only two phones on the system and I am running version 10851 from
yesterday. If I only have the udp phone registered and the tcp
phone is
off, it works fine. It is only when I have a mix of a udp reg and a
tcp
reg on the same number that I appear to get a core dump.


Peder

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
msc at freeswitch.org
Guest





PostPosted: Thu Dec 18, 2008 11:22 am    Post subject: [Freeswitch-users] Core Dump Reply with quote

Is this a single occurrence or can you make it happen consistently?
-MC

Sent from my iPhone

On Dec 18, 2008, at 7:36 AM, "peder@networkoblivion.com" <peder@networkoblivion.com
Quote:
wrote:

Quote:
If anybody wants to look at the core dump in gdb, here it is (the
actual
core is 256Meg):

http://pastebin.freeswitch.org/6476

I know zip about debugging and gdb, but from looking through it, I
see a
segmentation fault and it appears to be thread 15094. The last three
items in the bt full for that thread are:

destroy_status = <value optimized out>
fd = (switch_file_t *) 0x80529b0
pool = (switch_memory_pool_t *) 0x80528f0

So I would guess it is trying to access an invalid memory location,
but
why, I have no idea....

Any ideas?


Peder


Michael S Collins wrote:
Quote:
Check out this page:
wiki.freeswitch.org/wiki/Debugging_Freeswitch

-MC

Sent from my iPhone

On Dec 18, 2008, at 6:38 AM, "peder@networkoblivion.com" <peder@networkoblivion.com
Quote:
wrote:

Quote:
What is the process for capturing and submitting a core dump?

I am messing around with the Cisco 79x1 phones and tcp and multiple
reg.
I have a 7961 using tcp and a 7960 using udp both reg'd with the
same
number and both showing up as registered. If I call out from the
phone
using tcp, it works. If I call out from the phone using udp, I
get a
core dump. If I call in, it calls both phones and I am assuming the
call to the phone using udp causes a core dump as well. These are
the
only two phones on the system and I am running version 10851 from
yesterday. If I only have the udp phone registered and the tcp
phone is
off, it works fine. It is only when I have a mix of a udp reg and a
tcp
reg on the same number that I appear to get a core dump.


Peder

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
brian at freeswitch.org
Guest





PostPosted: Thu Dec 18, 2008 11:23 am    Post subject: [Freeswitch-users] Core Dump Reply with quote

Peder,
Can you join us on IRC.
/b

On Dec 18, 2008, at 9:36 AM, peder@networkoblivion.com wrote:

Quote:
If anybody wants to look at the core dump in gdb, here it is (the
actual
core is 256Meg):

http://pastebin.freeswitch.org/6476

I know zip about debugging and gdb, but from looking through it, I
see a
segmentation fault and it appears to be thread 15094. The last three
items in the bt full for that thread are:

destroy_status = <value optimized out>
fd = (switch_file_t *) 0x80529b0
pool = (switch_memory_pool_t *) 0x80528f0

So I would guess it is trying to access an invalid memory location,
but
why, I have no idea....

Any ideas?


Peder


Michael S Collins wrote:
Quote:
Check out this page:
wiki.freeswitch.org/wiki/Debugging_Freeswitch

-MC

Sent from my iPhone

On Dec 18, 2008, at 6:38 AM, "peder@networkoblivion.com" <peder@networkoblivion.com
Quote:
wrote:

Quote:
What is the process for capturing and submitting a core dump?

I am messing around with the Cisco 79x1 phones and tcp and multiple
reg.
I have a 7961 using tcp and a 7960 using udp both reg'd with the
same
number and both showing up as registered. If I call out from the
phone
using tcp, it works. If I call out from the phone using udp, I
get a
core dump. If I call in, it calls both phones and I am assuming the
call to the phone using udp causes a core dump as well. These are
the
only two phones on the system and I am running version 10851 from
yesterday. If I only have the udp phone registered and the tcp
phone is
off, it works fine. It is only when I have a mix of a udp reg and a
tcp
reg on the same number that I appear to get a core dump.


Peder

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
anthony.minessale at g...
Guest





PostPosted: Thu Dec 18, 2008 2:08 pm    Post subject: [Freeswitch-users] Core Dump Reply with quote

Can you answer the questions and possibly go online on IRC so we can debug your issue?


On Thu, Dec 18, 2008 at 9:36 AM, peder@networkoblivion.com (peder@networkoblivion.com) <peder@networkoblivion.com (peder@networkoblivion.com)> wrote:
Quote:
If anybody wants to look at the core dump in gdb, here it is (the actual
core is 256Meg):

http://pastebin.freeswitch.org/6476

I know zip about debugging and gdb, but from looking through it, I see a
segmentation fault and it appears to be thread 15094. The last three
items in the bt full for that thread are:

destroy_status = <value optimized out>
fd = (switch_file_t *) 0x80529b0
pool = (switch_memory_pool_t *) 0x80528f0

So I would guess it is trying to access an invalid memory location, but
why, I have no idea....

Any ideas?


Peder



Michael S Collins wrote:
Quote:
Check out this page:
wiki.freeswitch.org/wiki/Debugging_Freeswitch

-MC

Sent from my iPhone

On Dec 18, 2008, at 6:38 AM, "peder@networkoblivion.com (peder@networkoblivion.com)" <peder@networkoblivion.com (peder@networkoblivion.com)
Quote:
wrote:

Quote:
What is the process for capturing and submitting a core dump?

I am messing around with the Cisco 79x1 phones and tcp and multiple
reg.
I have a 7961 using tcp and a 7960 using udp both reg'd with the same
number and both showing up as registered. If I call out from the
phone
using tcp, it works. If I call out from the phone using udp, I get a
core dump. If I call in, it calls both phones and I am assuming the
call to the phone using udp causes a core dump as well. These are the
only two phones on the system and I am running version 10851 from
yesterday. If I only have the udp phone registered and the tcp
phone is
off, it works fine. It is only when I have a mix of a udp reg and a
tcp
reg on the same number that I appear to get a core dump.


Peder

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org





--
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/

AIM: anthm
MSN:anthony_minessale@hotmail.com ([email]MSN%3Aanthony_minessale@hotmail.com[/email])
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com ([email]PAYPAL%3Aanthony.minessale@gmail.com[/email])
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888@conference.freeswitch.org ([email]sip%3A888@conference.freeswitch.org[/email])
iax:guest@conference.freeswitch.org/888
googletalk:conf+888@conference.freeswitch.org ([email]googletalk%3Aconf%2B888@conference.freeswitch.org[/email])
pstn:213-799-1400
Back to top
peder at networkoblivi...
Guest





PostPosted: Thu Dec 18, 2008 2:41 pm    Post subject: [Freeswitch-users] Core Dump Reply with quote

I can make it happen on demand. All I have to do is call the shared
number and it crashes. I'll hop on IRC in a bit.

Michael S Collins wrote:
Quote:
Is this a single occurrence or can you make it happen consistently?
-MC

Sent from my iPhone

On Dec 18, 2008, at 7:36 AM, "peder@networkoblivion.com" <peder@networkoblivion.com
Quote:
wrote:

Quote:
If anybody wants to look at the core dump in gdb, here it is (the
actual
core is 256Meg):

http://pastebin.freeswitch.org/6476

I know zip about debugging and gdb, but from looking through it, I
see a
segmentation fault and it appears to be thread 15094. The last three
items in the bt full for that thread are:

destroy_status = <value optimized out>
fd = (switch_file_t *) 0x80529b0
pool = (switch_memory_pool_t *) 0x80528f0

So I would guess it is trying to access an invalid memory location,
but
why, I have no idea....

Any ideas?


Peder


Michael S Collins wrote:
Quote:
Check out this page:
wiki.freeswitch.org/wiki/Debugging_Freeswitch

-MC

Sent from my iPhone

On Dec 18, 2008, at 6:38 AM, "peder@networkoblivion.com" <peder@networkoblivion.com
Quote:
wrote:
What is the process for capturing and submitting a core dump?

I am messing around with the Cisco 79x1 phones and tcp and multiple
reg.
I have a 7961 using tcp and a 7960 using udp both reg'd with the
same
number and both showing up as registered. If I call out from the
phone
using tcp, it works. If I call out from the phone using udp, I
get a
core dump. If I call in, it calls both phones and I am assuming the
call to the phone using udp causes a core dump as well. These are
the
only two phones on the system and I am running version 10851 from
yesterday. If I only have the udp phone registered and the tcp
phone is
off, it works fine. It is only when I have a mix of a udp reg and a
tcp
reg on the same number that I appear to get a core dump.


Peder

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> freeSWITCH Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services