VoIP Mailing List Archives

[jsokulski at dotsystem...]

Hello
I am trying to initiate a call from javascript, it works fine for local numbers:

[nicolas at medularis.com]

Jacek,

I had a similar problem once. It actually depends on your sip gateway,
but I was able to solve the problem by setting the caller id, ie:

session1 = new Session();
session1.setCallerData("caller_id_name", "8280052500");
session1.setCallerData("caller_id_number", "8280052500");
session1.originate(session1,
"{ignore_early_media=true}sofia/gateway/sip.ipcorp.cl/0225490317",
60);

In this case, the caller_id was the number assigned to me by the
external gateway.

Hope it helps.

Nicolas

On Tue, Feb 3, 2009 at 10:36 AM, Jacek Sokulski <jsokulski@dotsystems.pl> wrote:

[brian at freeswitch.org]

YOU should NEVER use this method or call setCallerData at all you
should use the correct methods to override the callerid.

If its a B-Leg born from an A-Leg you use these on the on the A-Leg:

http://wiki.freeswitch.org/wiki/Channel_Variables#effective_caller_id_name
http://wiki.freeswitch.org/wiki/Channel_Variables#effective_caller_id_number

If you're originating you use this:

http://wiki.freeswitch.org/wiki/Channel_Variables#origination_caller_id_name
http://wiki.freeswitch.org/wiki/Channel_Variables#origination_caller_id_number

/b

On Feb 3, 2009, at 11:20 AM, Nicolas Brenner wrote:

[nicolas at medularis.com]

Oops! Well, fortunately I don't use that voip provider anymore (nor the script).

Thanks Brian.

Nicolas

On Tue, Feb 3, 2009 at 2:25 PM, Brian West <brian@freeswitch.org> wrote:

[jsokulski at dotsystem...]

We have tried setting both effective_caller_id_number and
origination_caller_id_number:

session1.originate(session1,"{origination_caller_id_number=fixed0248b}sofia/gateway/halonet/0225490317",15);
but the problem still exists. The solution we have found for the case
when we originate two calls, local and external, is as follow:

session1 = new Session();
session1.originate(session1,"user/1003@192.168.1.122",15);//local
if(session1.ready()) {
session1.execute("execute_extension","00930691688627 XML default");//external
}

so the external call goes through the dialplan.
It does not work if both calls are external. One possible solution could be
to pass the originating call through dialplan (loopback?) but we have not managed
to figure out how to do it.

Thanks
Jacek

Dnia 03-02-2009, wto o godzinie 14:31 -0300, Nicolas Brenner pisze:

[anthony.minessale at g...]

Where did you learn how to use js this way?
session.originate is being misused here and is depricated and may be removed.

the first arg to session.originate is either undefined or a *different* session (the a leg)

session1 = new Session();
session1.originate(undefined, "{ignore_early_media=true}user/1008@192.168.1.122 (1008@192.168.1.122)");

session1.setVariable("effective_caller_id_number","fixed0248b");

//once you have session1 when you originate session2 you pass session1 as the arg
// the effective_caller_id is taken from session1

session2 = new Session();
session2.originate(session1, "sofia/gateway/halonet/0225490317");

Anyway this whole code is depricated in favor of this:

session1 = new Session("{ignore_early_media=true}user/1008@192.168.1.122 (1008@192.168.1.122)");

if (session1.ready()) {
session1.setVariable("effective_caller_id_number","fixed0248b");
session2 = new Session("sofia/gateway/halonet/0225490317", session1);
}

and could be further refactored down to this:

session1 = new Session("{ignore_early_media=true}user/1008@192.168.1.122 (1008@192.168.1.122)");
if (session1.ready()) {
session1.setVariable("effective_caller_id_number","fixed0248b");
session1.execute("bridge", "sofia/gateway/halonet/0225490317");
}

or down to this one line of code that will setup the call detached from the script and exit.

var result = apiExecute("originate", "{effective_caller_id_number=fixed0248b,origination_caller_id_number=1000,ignore_early_media=true}user/1008@192.168.1.122 (1008@192.168.1.122) bridge:sofia/gateway/halonet/0225490317 inline");

if you dont care about the result and want to exit even before the call is completed.

var result = apiExecute("bgapi", "originate {effective_caller_id_number=fixed0248b,origination_caller_id_number=1000,ignore_early_media=true}user/1008@192.168.1.122 (1008@192.168.1.122) bridge:sofia/gateway/halonet/0225490317 inline");



On Wed, Feb 4, 2009 at 2:51 AM, Jacek Sokulski <jsokulski@dotsystems.pl> wrote:

[jsokulski at dotsystem...]

Thanks Anthony,
the js snippets are very instructive.
A couple of points:
1. The code with apiExecute does not work (local phone is connected, but
after picking up it hungs up immediately), other examples are working
fine.

2. It does not show how initiate external call without existing session.

3. How can one pass the call through dialplan?

Jacek

PS.
we got the code probable from wiki or from this mialing list.

Dnia 04-02-2009, śro o godzinie 08:09 -0600, Anthony Minessale pisze:

[anthony.minessale at g...]

can you press f8 for debug and try that apiExecute and post the results?

On Wed, Feb 4, 2009 at 8:46 AM, Jacek Sokulski <jsokulski@dotsystems.pl> wrote:

[msc at freeswitch.org]

I'll make sure the substance of this is in the wiki and I'll look for
references to the deprecated way and remove those.
-MC

On Wed, Feb 4, 2009 at 6:09 AM, Anthony Minessale
<anthony.minessale@gmail.com> wrote:

[jsokulski at dotsystem...]

the result of
apiExecute("bgapi", "originate
{effective_caller_id_number=fixed0248b,origination_caller_id_number=1000,ignore_early_media=true}user/1008@192.168.1.122 bridge:sofia/gateway/halonet/0225490317 inline");

[anthony.minessale at g...]

Oddly the provider returns

SIP/2.0 500 Internal Server Error

to your invite. Maybe you can ask them why they do that in this particular case.


On Thu, Feb 5, 2009 at 7:09 AM, Jacek Sokulski <jsokulski@dotsystems.pl> wrote: