VoIP Mailing List Archives :: View topic - [Freeswitch-users] hide caller_id_number, transfer and then change caller_id

Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community

[Freeswitch-users] hide caller_id_number, transfer and then change caller_id_number

VoIP Mailing List Archives Forum Index -> freeSWITCH Users

View previous topic :: View next topic

Author

Message

anthony.minessale at g...
Guest

Posted: Mon Mar 02, 2009 9:05 am Post subject: [Freeswitch-users] hide caller_id_number, transfer and then

put origination_caller_id_number in the dial string of any call and you can set the caller id individually for that leg

{origination_caller_id_number=1234}<any normal dial string>

On Sun, Mar 1, 2009 at 3:38 PM, Peter P GMX <Prometheus001@gmx.net (Prometheus001@gmx.net)> wrote:

Quote:

Hello,

I have the following problem while providing callback (mod_eventsocket
is used):
1) I want to call a certain destination number A with a suppressed
caller_id_number (this works fine with some vars in the origination string)
2) The destination number A picks up the phone and enters a target
number B by DTMF
3) freeswitch then forwards the call to target number B by DTMF and I
want to show the number A. I do this with uuid_setvar. The problem is
that it still shows unknown.
This is all with SIP.

uuid_setvar however worked if I did not set the caller_id_number to
unknown. Per default this is then "00000000000" and can then be changed
with uuid_setvar to the number of A.
But if I set caller_id_number to unknown I can no longer change it to A.

Any hint?

Best regards
Peter

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

--
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/

AIM: anthm
MSN:anthony_minessale@hotmail.com ([email]MSN%3Aanthony_minessale@hotmail.com[/email])
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com ([email]PAYPAL%3Aanthony.minessale@gmail.com[/email])
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888@conference.freeswitch.org ([email]sip%3A888@conference.freeswitch.org[/email])
iax:guest@conference.freeswitch.org/888
googletalk:conf+888@conference.freeswitch.org ([email]googletalk%3Aconf%2B888@conference.freeswitch.org[/email])
pstn:213-799-1400

anthony.minessale at g...
Guest

Posted: Mon Mar 02, 2009 3:09 pm Post subject: [Freeswitch-users] hide caller_id_number, transfer and then

origination_caller_id number is not ok as a variable unless its in {} as part of the dial string
it's an exception that is parsed before the channel is even created.

I think you are drawing the wrong conclusion about what works and doesn't work.
If you can produce a dial string that contains {origination_caller_id_number=x} you will always be able to set it.

I assume you are using a recent version of FS as we did have a small bug with this variable a few weeks ago.

On Mon, Mar 2, 2009 at 10:19 AM, Peter P GMX <Prometheus001@gmx.net (Prometheus001@gmx.net)> wrote:

Quote:

Hello Anthony,

I do this when I orginate the call. This way we suppress the cid when we
call party A and transfer A to an internal extension (our callback
application).
But now comes the part that does not work:
After A enters the target number B (via DTMF), we set the cid variables
via uuid_setvar and then transfer A via uuid_transfer to party B.
However uuid_setvar does not work in that case.

BUT: If we do the same scenario and do not suppress the cid in the
originate part, then uuid_setvar works correctly and sets the cid_number.

Best regards
Peter

Anthony Minessale schrieb:

Quote:

put origination_caller_id_number in the dial string of any call and
you can set the caller id individually for that leg

{origination_caller_id_number=1234}<any normal dial string>

On Sun, Mar 1, 2009 at 3:38 PM, Peter P GMX <Prometheus001@gmx.net (Prometheus001@gmx.net)

Quote:

<mailto:Prometheus001@gmx.net (Prometheus001@gmx.net)>> wrote:

Hello,

I have the following problem while providing callback (mod_eventsocket
is used):
1) I want to call a certain destination number A with a suppressed
caller_id_number (this works fine with some vars in the
origination string)
2) The destination number A picks up the phone and enters a target
number B by DTMF
3) freeswitch then forwards the call to target number B by DTMF and I
want to show the number A. I do this with uuid_setvar. The problem is
that it still shows unknown.
This is all with SIP.

uuid_setvar however worked if I did not set the caller_id_number to
unknown. Per default this is then "00000000000" and can then be
changed
with uuid_setvar to the number of A.
But if I set caller_id_number to unknown I can no longer change it
to A.

Any hint?

Best regards
Peter

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)

Quote:

<mailto:Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

--
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/

AIM: anthm
MSN:anthony_minessale@hotmail.com ([email]MSN%3Aanthony_minessale@hotmail.com[/email])

Quote:

<mailto:MSN%3Aanthony_minessale@hotmail.com ([email]MSN%253Aanthony_minessale@hotmail.com[/email])>
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com ([email]PAYPAL%3Aanthony.minessale@gmail.com[/email])

Quote:

<mailto:PAYPAL%3Aanthony.minessale@gmail.com ([email]PAYPAL%253Aanthony.minessale@gmail.com[/email])>
IRC: irc.freenode.net <http://irc.freenode.net> #freeswitch

FreeSWITCH Developer Conference
sip:888@conference.freeswitch.org ([email]sip%3A888@conference.freeswitch.org[/email])

Quote:

<mailto:sip%3A888@conference.freeswitch.org ([email]sip%253A888@conference.freeswitch.org[/email])>
iax:guest@conference.freeswitch.org/888

Quote:

<http://iax:guest@conference.freeswitch.org/888>
googletalk:conf+888@conference.freeswitch.org ([email]googletalk%3Aconf%2B888@conference.freeswitch.org[/email])

Quote:

<mailto:googletalk%3Aconf%2B888@conference.freeswitch.org ([email]googletalk%253Aconf%252B888@conference.freeswitch.org[/email])>
pstn:213-799-1400
------------------------------------------------------------------------

Quote:

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

msc at freeswitch.org
Guest

Posted: Mon Mar 02, 2009 5:16 pm Post subject: [Freeswitch-users] hide caller_id_number, transfer and then

On Mon, Mar 2, 2009 at 1:58 PM, Peter P GMX <Prometheus001@gmx.net> wrote:

Quote:

Hello Anthony,

sorry for being tenacious but in some cases it works in a way we need it:
If I a am not suppressing the cid numer when calling A, the following
scenario works:

* A receives a Call (originate) with CID '0000000000' (default from
switch_caller.c)
* A dials some digits via DTMF, the app set the cid variables via
uuid_setvar and uuid_transfers the call to B. B receives a call
with the right cid set.

Maybe I simply modify the default cid '0000000000' to a different value
in switch_caller.c? Is there a special reason why this is '0000000000'?

Check vars.xml to confirm that you have actually set a default caller
ID. Most likely you'll still have the default caller id number set to
all zeroes, which is the default.

-MC

Quote:

I am using trunk version 12293.

Best regards
Peter

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

anthony.minessale at g...
Guest

Posted: Mon Mar 02, 2009 5:31 pm Post subject: [Freeswitch-users] hide caller_id_number, transfer and then

Since you did not describe the exact way you are doing it with enough detail or any trace I can't begin to tell you
what your problem is. you did not even mention what variable you are using or show examples.

All I can do is tell you again that if you set the origination_caller_id_number in the dial string it will
be the most likely to work for you.

On Mon, Mar 2, 2009 at 4:08 PM, Michael Collins <msc@freeswitch.org (msc@freeswitch.org)> wrote:

Quote:

On Mon, Mar 2, 2009 at 1:58 PM, Peter P GMX <Prometheus001@gmx.net (Prometheus001@gmx.net)> wrote:

Quote:

Check vars.xml to confirm that you have actually set a default caller
ID. Most likely you'll still have the default caller id number set to
all zeroes, which is the default.

-MC

Quote:

I am using trunk version 12293.

Best regards
Peter

Display posts from previous:

	VoIP Mailing List Archives Forum Index -> freeSWITCH Users	All times are GMT - 5 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum