VoIP Mailing List Archives

[geisj at pagestation.com]

I have two machines on the internet. Box A and Box B.

Box A has a SIP trunk to the world, Making calls box A works fine
I have audio to my cell and all works. 


I defined a SIP trunk between box B and A. tried to make a call originating 
from box B - to box A and then over the SIP trunk to my cell.


My cell rings but then no audio.


I have defined SIP trunks before between boxes pretty straight forward.
I have checked and my firewalls are open for SIP/RTP
-A INPUT -m state --state NEW -m udp -p udp --dport 5060 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 8000:60000 -j ACCEPT
-A INPUT -m state --state NEW -m udp -p udp --dport 8000:60000 -j ACCEPT



I am using asterisk 11.16


box A is 
[boxab_sip]
type=friend
username=boxa_sip

secret=***
disallow=all
allow=ulaw
allow=alaw
allow=gsm
dtmfmode=rfc2833
host=DNS Name here
context=sip_trunk
insecure=port,invite



box B is 
[boxab_sip]
type=friend
username=boxab_sip

secret=***
disallow=all
allow=ulaw
allow=alaw
allow=gsm
dtmfmode=rfc2833
host=DNS Name here
context=sip_turnk
insecure=port,invite



Is there something I am missing?
The one piece I have not done before is SIP trunk - to - SIP trunk.
But the phone rings - so its routed - just no audio.


Thoughts?


Thanks,






Jerry

[adrian-lists at wombit...]